-
-
Save evianzhow/a401be07593b0fe90f5db338c12b7ed8 to your computer and use it in GitHub Desktop.
| 34T62-N84MB-7DQGY-G7XGT-YTQ63 |
@andy-butterworth My server kept working after the expiration date. it was being restarted daily. For a lab env, you won't notice any difference as most likely you won't be using all of the features your RAID card has. I sure wasn't.
Hi moraza, I'm interested in what happens to the RAID6 functionality after (if?) it expires. There are two DL380 G7's with 8 x 900GB SAS drives in each and I'd rather build a RAID6 array rather than 1 or 2 x RAID5s. The cache currently isn't working on one of them as the battery has died so I'm trying to source a replacement at the moment, although I'm struggling as there seem to be different options for the batteries. The replacement I got seems to be incompatible (error message when the P410i boots and initialises the drives).
Cheers. I appreciate the warning regarding cheap batteries. I got a HP branded replacement; however, I think there are various part numbers, and they all have the same connector and the one I've got isn't suitable for a DL370 G7 P410i. Waiting for the supplied to come back to me as I asked for one that was suitable for a DL380 G7 P410i.
I'm still a bit concerned about the RAID6 functionality after (if?) the license expires. Once the RAID has been configured, it won't change so if the behavior after the license expiring is that changes can't be made then that won't be an issue. However, if the cache will get disabled then that's a bigger issue.
I built a RAID6 volume using 8 x 900GB SAS drives connected to a P410i on a DL380 G7 running ESXi 7.0U3. I used the evaluation license and its now expired. The volume is still functional, however the cache is disabled. This is what the HP SSA utility shows:
`[root@esxi-host-6:~] /opt/smartstorageadmin/ssacli/bin/ssacli ctrl all show detail
Smart Array P410i in Slot 0 (Embedded)
Bus Interface: PCI
Slot: 0
Serial Number: xxxxxxxxxxxxxxxx
Cache Serial Number: xxxxxxxxxxxxx
Controller Status: OK
Hardware Revision: C
Firmware Version: 6.64-0
Firmware Supports Online Firmware Activation: False
Rebuild Priority: Medium
Expand Priority: Medium
Surface Scan Delay: 15 secs
Surface Scan Mode: Idle
Parallel Surface Scan Supported: No
Queue Depth: Automatic
Monitor and Performance Delay: 60 min
Elevator Sort: Enabled
Degraded Performance Optimization: Disabled
Wait for Cache Room: Disabled
Surface Analysis Inconsistency Notification: Disabled
Post Prompt Timeout: 0 secs
Cache Board Present: True
Cache Status: Temporarily Disabled
Cache Status Details: Cache disabled; ADG enabler missing.
Cache Disable Reason: Temporary disable condition. The cache has been disabled because a RAID6 volume is configured but the enablement mechanism is broken or missing.
Drive Write Cache: Disabled
Total Cache Size: 0.5
Total Cache Memory Available: 0.4
No-Battery Write Cache: Disabled
Cache Backup Power Source: Capacitors
Battery/Capacitor Count: 1
Battery/Capacitor Status: OK
SATA NCQ Supported: True
Number of Ports: 2 Internal only
Encryption: Not Set
Driver Name: nhpsa
Driver Version: 70.0051.0.100-4vmw
PCI Address (Domain:Bus:Device.Function): 0000:05:00.0
Port Max Phy Rate Limiting Supported: False
Host Serial Number: xxxxxxxxxx
Sanitize Erase Supported: False
Primary Boot Volume: None
Secondary Boot Volume: None
`
It has been rebooted several times, so the RAID6 is still working, just no cache.
Using the ACU on the Proliant Support Pack DVD/USB, you can remove and re-add the evaluation key (you don't seem to be able to remove the key from the P410i BIOS settings (F8 on boot).
I'd therefore really like to put a non-evaluation key in there. Anyone know any sources?
Cheers
Andy
@andy-butterworth
You can remove the license with this command:
delete /map1 license
But I have no idea what will happen and If you are able to reuse it. (I do not recommend using that command as I have no Idea what will happen! Definitely have a Backup that you can restore!!!)
But all I can say is, your better off with a SSD as cache.
Otherwise go for DELL. I swear to god, so much better. I could even write a script on my hypervisor that turns down the fans at night so that I can sleep in peace. And in the morning the script released the limit for the fans.
Edit:
I think I am able to acquire an unused iLO license key. I will post the key here as soon as I have it but I don't know If you can use it multiple times.
Anyone familiar with the HPE 'ssacli' commands and licenses?
The help shows this `root@localhost:~] /opt/smartstorageadmin/ssacli/bin/ssacli help license
The following documentation pertains to your search:
add [licensekey=XXXXX-XXXXX-XXXXX-XXXXX-XXXXX]
The add command adds a license key to the specified array controller.The
target can be any valid controller.
delete
The command removes a license key from the specified array controller.The
target can be any valid license key.
Examples:
controller slot=0 add licensekey=XXXXX-XXXXX-XXXXX-XXXXX-XXXXX
controller slot=0 add lk=XXXXXXXXXXXXXXXXXXXXXXXXX
controller all add lk=XXXXXXXXXXXXXXXXXXXXXXXXX
controller slot=0 licensekey XXXXX-XXXXX-XXXXX-XXXXX-XXXXX delete
controller slot=0 lk XXXXXXXXXXXXXXXXXXXXXXXXX delete
controller slot=0 lk XXXXXXXXXXXXXXXXXXXXXXXXX show
controller slot=0 lk all show`
I can add the license with the command
ssacli ctrl slot=0 add licensekey=34T62-N84MB-7DQGY-G7XGT-YTQ63
however deleting it doesn't work and I get this error
`[root@localhost:~] /opt/smartstorageadmin/ssacli/bin/ssacli ctrl slot=0 lk 34T62-N84MB-7DQGY-G7XGT-YTQ63 delete
Error: The specified device does not have a licensekey identified by
"34T62-N84MB-7DQGY-G7XGT-YTQ63"
`
I've tried using the keyword 'licensekey' and the shortened 'lk' as well as the key with hyphens and without and I get the same error message.
I was hoping to just create a script to remove and re-add the license and run it every few months.
Here is a license:
36Z2J-8TJG8-M6XH4-6YWKB-WXM36
Hi, thanks for this, however it doesn't appear to work.
I have tried adding it during boot (F8) and from the ACU on the Proliant Support Pack .ISO.
Here is a license:
36Z2J-8TJG8-M6XH4-6YWKB-WXM36
I don't know If you can use it multiple times.
But whoever uses it, you can thank me with Monero here: 44YXzbkYW8X7qeuwKD9iKfSJkKzBwKn42insYuc7H1MwYBFBB9deND72oE2HcB4ELNQsEkDZotLpdekoAQazcN5EVHp3oSR
:D
Doesn't work for me too
Doesn't work for me too
HP should honestly release the key so we can use this in lab.
HP should honestly release the key so we can use this in lab.
Those greedy motherf.ers at HP wont release the master key for that shitty underperformer p410 not even in 100 yrs. Hell freeze over sooner than HP giving away anything for free. Thousands of unlicensed p410 are working even in 2024 all over the world. HP cannot let it happen to lose any potential $ from any single one of these people. So they wont publish the key, I can guarantee this to all of you. HP is similarly greedy mf company as oracle.
Here is a license: 36Z2J-8TJG8-M6XH4-6YWKB-WXM36
That p410 license key is bound to the serial number of your own specific device. Every other p410 has a different serial number, therefore no other card will accept this as a valid license. This works only on your unique card. There are clever motherf.ers working at HP, if its about milking their customers, so dont have high hopes you can find any working license for this shitty p410 card anywhere on the entire internet.
Im running into the same issue with my p440ar. I cant get a license for it through Hp because its a discontinued server. Why not just give us firmware to unlock it to its full potential then? HP is nothing more than greedy ass pieces of trash. I will NEVER buy another HP. I paid cash for this server and still get shit treatment from them. Because I dont have a subscription I was unable to update the firmware for iLO, as well as bios. Thankfully digging into the community, I was able to find not only the iLO firmware, but the BIOS as well. Even further digging I found the SPP (Service Pack for the Gen 9 servers). I have it being seeded on line right now.
In my past I have used Dell Poweredge, and still have my origional Dell Poweredge 1650's (x2) as well as my Dell Poweredge 2650. All 3 run perfectly fine just slow since the age. But I bought them new at the same time I purchased my HP DL380 G4. HP made it impossible for me to get firmwares, by putting them behind a paywall. Why? for the love of god this is BULLCRAP!. Dell has allowed all users to obtain their stuff ree.. I just dont get why a corporation would become so greedy and put everything behind a paywall. This will discourage people from buying more form them in the future. It has me. My DL380 G4 was purchased new, never had issues and never even updated the firmware. Id like to update the firmware too the latest available but all behind paywall.
Youd sure would think that they would be more grateful that we are keeping their products out of the landfill, and using their product. Honestly its a solid server. The G9, and even the G4. But holy hell, they are way out of service date, just release the shit already!
Doesn’t work on HP Smart Array P420i
Seems you can purchase a (currently cheap due to promotion) license from this site, though can't order it (yet) as I'm located outside of NZ.
https://acquire.co.nz/p/hpe/software-licensing/other-software/hpe-smartcache-no-media-24x7-technical-support-1-svr-license-d7s26a-76953/
I've sent them an email for more information.
I would rather find the license or solution to get the license for free, I don’t want to buy a license for home lab, I am totally in for paying for the license for enterprise environment but for polish home lab it’s pretty expensive thing, for the cost of Smart Array license I can get a pretty good phone
Uhm the license is currently in promotion and costs with GST (VAT) about 30NZD (~17EUR). So I don't think you'll be able to purchase much phone for it 😄 I'm also searching for a cheap (or free) license for my homelab.
this help?
https://pastebin.com/UTSxe7rv
HP made ADG free for SAAP 2.0+
You can no longer buy SAAP 1.0
For future reference, since these are no longer available from HPE
Smart Array P400/P410/P410i
{36YR5-5C2W2-B79R4-ZPG2P-D2Z3S}
{348CB-62VKV-YQ3B5-H4JKQ-Y4DGJ}
{36XLJ-X5WBD-QW9X8-9JWTK-HVJ8C}
{34QDW-DXV4K-7GY5S-V2W7W-X964X}
{37B4T-H4KHX-CY8YG-XYVBV-MX8RN}
{37BKP-2NK3C-WRV9M-PLT74-LJPC7}
any for 440ar?
any for 440ar?
Gen9 and above moved to a "SmartCache" license as SAAP was deprecated.
I don't see any public licenses floating around GitHub for this.
D7S26A = Physical License Single Server
D7S27A = Physical License Multi Pack
D7S27AAE = Electronic License Single/Multi
List Price is $300 but 50% off is fairly common, so if you bite the bullet anything close/below $100 is a decent price.
And before anyone asks, the Gen10 and above MR series of controllers do not offer LSI CacheCade which is a similar feature on MegaRAID controllers. Broadcom (owns LSI) decided to get rid of it so HPE never implemented it.
Well I have a DL560 Gen8 and it needs a SmartCache license (P420i). Anyone found a way around?
Well I have a DL560 Gen8 and it needs a SmartCache license (P420i). Anyone found a way around?
any idea what the product number is?
Well I have a DL560 Gen8 and it needs a SmartCache license (P420i). Anyone found a way around?
any idea what the product number is?
686784-421, they just changed CPU and RAM as I bought it used/refurbished.
Well I have a DL560 Gen8 and it needs a SmartCache license (P420i). Anyone found a way around?
any idea what the product number is?
686784-421, they just changed CPU and RAM as I bought it used/refurbished.
I meant the product code for the thing you are looking for, i think its this https://www.ebay.co.uk/itm/154290948651
516540-001
or
516471-B21
also according to this if its a gen8 - https://support.hpe.com/hpesc/public/docDisplay?docId=c03369047&page=GUID-BC9621D3-85D1-489F-A8EE-D2C0A239846E.html
"Either a minimum of 256MB cache and battery kit or a minimum of 512MB BBWC/FBWC is required to enable RAID 5, 50, 6, 60. HP Smart Array Advanced Pack (SAAP 2.0) is no longer required to enable 6 & 60 (Advanced Data Guarding). However, controller must be in firmware version 4.68 (or later)"
Have you updated the firmware yet to see if it helps?
also according to this if its a gen8 - https://support.hpe.com/hpesc/public/docDisplay?docId=c03369047&page=GUID-BC9621D3-85D1-489F-A8EE-D2C0A239846E.html "Either a minimum of 256MB cache and battery kit or a minimum of 512MB BBWC/FBWC is required to enable RAID 5, 50, 6, 60. HP Smart Array Advanced Pack (SAAP 2.0) is no longer required to enable 6 & 60 (Advanced Data Guarding). However, controller must be in firmware version 4.68 (or later)" Have you updated the firmware yet to see if it helps?
The firmware is up to date (8.32), I'm asking if someone has got a SmartCache license as my RAID controller is a P420i.
@andy-butterworth Just don't use the cache, the cache continued working for me. But the battery pack for the cache died and after a power outage and corrupting some data I deactivated it anyway and used an SSD as cache. And after a few more months I switched to Dell because my drives just died one after another every two weeks. In the last year not one of my drives died in my Dell server.
Edit:
AFAIK you can't re-use the key.