maniankara

name: listfiles

on:
  workflow_dispatch:

jobs:
  list-png-files:
    runs-on: ubuntu-latest
    outputs:
      file: ${{ steps.set-files.outputs.file }}

thelastlin

Tested on macOS Sonoma Developer beta 2 (23A5276g)

Build libsk-libfido2.so

Prerequisite

1. Download openssh-portable source code, install libcrypto, libfido2;
2. Configure openssh-portable build system by ./configure # [options].

Apply patch

atc1441

#include <stdio.h>
#include <stdint.h>
// Philips Sonicare NFC Head Password calculation by @atc1441 Video manual: https://www.youtube.com/watch?v=EPytrn8i8sc
uint16_t CRC16(uint16_t crc, uint8_t *buffer, int len) // Default CRC16 Algo
{
  while(len--)
  {
    crc ^= *buffer++ << 8;
    int bits = 0;
    do

piitaya

blueprint:
  name: Assist Calendar
  author: Piitaya
  description: Use Assist and a calendar to schedule actions in natural language.
  domain: automation
  input:
    calendar:
      name: Calendar
      description: All events in this calendar will be processed by Assist
      selector:

rigwild

Patch APK

Full tutorial to patch APKs on Android using apk-mitm and APKLab. Support for bundle APKs.

Pull APK

adb shell pm list packages
adb shell pm path <package_name>

bluewalk

About

Instructions to obtain WireGuard details of your NordVPN account. These can be used to setup a WireGuard tunnel on your router to NordVPN.

Source: https://forum.gl-inet.com/t/configure-wireguard-client-to-connect-to-nordvpn-servers/10422/27

Prerequisites

If you have any linux machine, use that or install a vm if you don't have one.

Get their official linux app installed. Make sure you have wireguard installed too. And set the used technology to Nordlynx by running nordvpn set technology nordlynx

yaythomas

convert hugo content files to page leaf bundles

This pipeline converts Hugo content pages to page leaf bundles.

From:

`-- content
    |-- about.md
    `-- post
 |-- content-1.md

Nizzle

esphome:
  name: shabadge

esp32:
  board: esp32-pro

logger:

wifi:
  ssid: !secret wifi_ssid

exavolt

FROM golang:1.13-alpine

# VARIANT can be either 'hugo' for the standard version or 'hugo_extended' for the extended version.
ARG VARIANT=hugo_extended
# VERSION can be either 'latest' or a specific version number
ARG VERSION=latest

RUN apk add --update --no-cache ca-certificates openssl git curl && \
    case ${VERSION} in \
    latest) \

davidruhmann

1. Insert the unifying receiver.
2. Download and Install the latest Unifying Receiver software. (version 250, firmware 024.010.00036 at time of writing)
   • https://support.logi.com/hc/en-us/articles/360025297913
3. Download and Install the latest SetPoint software. (version 6.69.126, firmware 041.001.00038 at time of writing)
   • https://support.logi.com/hc/en-us/articles/360024699134--Downloads-Wireless-Rechargeable-Touchpad-T650
4. Sync the T650 to your unifying receiver.
5. Open SetPoint and make any changes to the SetPoint configuration for your T650.
   • You may need to restart the T650 and SetPoint for initial detection.
6. Exit/close the SetPoint software (make sure it is fully closed and not in the tasktray)
7. Open the Properties for C:\Program Files\Logitech\SetPointP\SetPoint.exe