V380 Pro Activate ONVIF/RTSP

ceshi.ini

[CONST_PARAM]

rtsp			= 1	;  RTSPЭ�飬0���ر�     1������

guide.txt

V380 Pro cameras have rtsp/onvif disabled by default. This can be unlocked by inserting an SD-card into the camera. 
A step-by-step guide can be found below:

1) Download the V380 Pro app from the App Store or Google Play
2) Register or continue without registering
3) Boot your camera and couple it to the application
4) Set a custom username and password for your camera
5) Download the 'ceshi.ini' file and put it on the root of a micro SD card (so not in a subfolder)
6) Power down the camera, insert the SD card and boot the camera
7) The camera will talk in chinese, wait for 5 minutes (probably shorter, but to be sure)
8) Power down the camera, remove the SD card, delete the file and power up the camera
9) Connect to your camera using the protocol rtsp://username:password@ipaddress:554/live/ch00_0
10) DONE

A great way to test is downloading/using VLC and opening a network stream.

I had a talk with another v380 tech (probably a senior tech) and he mentioned that only dual cams v380 (prominent on outdoor models) have onvif & rtsp. So i decided to buy a dual cam v380 and it really has onvif and rtsp. But the downside is that both cameras are stacked and merged into a single stream (1920 x 2160) and unfortunately our NVR doesn't support that resolution.

I'm still finding ways to separate each cams into individual 1080p streams

May I know that rtsp stream url for that model, I also have the same one

Please can anyone find out the flags/switches to enable Humandoid AI detection?

I have a strong suspicion that these cameras actually have hardware support for Humanoid AI detection but because they are now selling a subscription to use DeepSeek Ai instead they are actively disabling them so it becomes a paid service. I have 2 exact camera models that have Humandoid AI detection built in. But sadly they don't have telnet open so I can't go digging into how this works.

i also have camera with 3 lens when i try ceshi.ini method the camera formats itself to factory settings then i turn off the camera and delete the file from the sdcard and put it back after i turn th camera back on. its useless because it has already reset to factory settings.
anyone has the fix for this ?

Any Solution Available we have the same cctv camera model? the thing is when we use this ceshi.ini method the camera reset itself to factory settings that is why it talk chinese. any help solution for this will be much appreciated thank you TS.

i also have camera with 3 lens when i try ceshi.ini method the camera formats itself to factory settings then i turn off the camera and delete the file from the sdcard and put it back after i turn th camera back on. its useless because it has already reset to factory settings.
anyone has the fix for this ?

Any Solution Available we have the same cctv camera model? the thing is when we use this ceshi.ini method the camera reset itself to factory settings that is why it talk chinese. any help solution for this will be much appreciated thank you TS.

Still no luck unfortunately