v2ray + openvpn to unblock gfw and netflix

v2ray_openvpn_netflix.md

If you're using wireguard please refer to v2ray+wireguard to bypass GFW and netflix/spotify/hulu

Two things need to be paid

• vps(such as bandwagonhost)
  • If you are using China Telecom, a CN2 network is required, or you may get stuck when streaming video
  • For bandwagonhost, you need to login, click Client Area -> Services -> Order New Services to get CN2 server
• vpn vendor to unblock netflix(a openvpn connection that can unblock netflix)

The basic idea is setup a socks5 proxy to forawrd all network traffic from the socks5 to a specific openvpn, in v2ray, forward all the netflix traffic to the socks5 proxy

Why not connect to the openvpn directly ?

The openvpn connection is highly unstable or slow due to GFW

Why not connect to VPS directly ?

You can easily get a fast VPS(CN2) from various provider, but most of them can't combined the fast and stable connection from China && unblock from the netflix

So, I decide to do it myself

Steps

1. install v2ray

   bash <(curl -s -L https://git.io/v2ray.sh)
   

2. config openvpn connection inside a docker container

In most case the following command can't set up properly, please read the Notice part to change the configuration if there's something wrong

    git clone https://github.com/zpoint/openvpn_socks5_docker.git
    cd openvpn_socks5_docker
    ./build.sh
    ./start.sh
    launch *.ovpn

3. exit the docker container, change your v2ray configure file to forward the netflix traffic to the openvpn connection inside the container, this is part of my configure file located in /etc/v2ray/config.json

   "inbounds": [
    {
     "port": 8888,
     "protocol": "vmess",
     "settings": {
      "clients": [
       {
        // private config
       }
      ]
     },
     "streamSettings": {
      "network": "ws"
     },
     "sniffing": {
      "enabled": true,
      "destOverride": [
       "http",
       "tls"
      ]
     }
    }
   ]
   
   
   "outbounds": [
    {
     "protocol": "socks",
     "settings": {
      "servers": [{
       "port": 9050,
       "address": "localhost"
      }]
     },
     "streamSettings": {
      "tcpSettings": {
       "header": {
        "type": "none"
       }
      },
      "network": "tcp",
      "security": "none"
     },
     "tag": "streaming"
    }
   ]
   
   "routing": {
    "domainStrategy": "IPOnDemand",
    "rules": [
        {
      "type": "field",
      "domain": [
       "domain:btstatic.com",
       "domain:netflix.com",
       "domain:netflix.net",
       "domain:nflxext.com",
       "domain:nflximg.com",
       "domain:nflximg.net",
       "domain:nflxsearch.net",
       "domain:nflxso.net",
       "domain:nflxvideo.net",
       "domain:ipaddress.com"
      ],
      "outboundTag": "streaming"
     }
    ]
   }
   

I asked How to config v2ray to proxy netflix to a sock5 proxy and other traffic to other server side proxy

GPT4 generated answer:

To configure V2Ray for proxying Netflix traffic to a SOCKS5 proxy and other traffic to a different server-side proxy, you need to set up routing rules in your V2Ray configuration file. The following is a step-by-step guide to help you achieve this:

1. Install V2Ray: If you haven't already, install V2Ray on your device by following the official installation guide: https://www.v2ray.com/en/welcome/install.html

2. Create a V2Ray configuration file: Create or modify your V2Ray configuration file (config.json). This file is usually located in /etc/v2ray/config.json or /usr/local/etc/v2ray/config.json, depending on your installation.

3. Setup the V2Ray configuration: In the config.json file, create or modify the configuration with the following structure:

{
  "inbounds": [
    {
      "port": 1080,
      "protocol": "socks",
      "listen": "0.0.0.0",
      "settings": {
        "auth": "noauth",
        "udp": true,
        "ip": "127.0.0.1"
      },
      "sniffing": {
        "enabled": true,
        "destOverride": ["http", "tls"]
      }
    }
  ],
  "outbounds": [
    {
      "protocol": "freedom",
      "settings": {},
      "tag": "direct"
    },
    {
      "protocol": "socks",
      "settings": {
        "servers": [
          {
            "address": "your_socks5_proxy_ip",
            "port": your_socks5_proxy_port,
            "users": [
              {
                "user": "your_socks5_username",
                "pass": "your_socks5_password"
              }
            ]
          }
        ]
      },
      "tag": "socks5"
    },
    {
      "protocol": "vmess",
      "settings": {
        "vnext": [
          {
            "address": "your_other_proxy_ip",
            "port": your_other_proxy_port,
            "users": [
              {
                "id": "your_user_id",
                "alterId": your_alter_id,
                "security": "auto"
              }
            ]
          }
        ]
      },
      "tag": "other_proxy"
    }
  ],
  "routing": {
    "rules": [
      {
        "type": "field",
        "domain": ["geosite:netflix"],
        "outboundTag": "socks5"
      },
      {
        "type": "field",
        "ip": ["geoip:private"],
        "outboundTag": "direct"
      },
      {
        "type": "field",
        "network": "udp,tcp",
        "outboundTag": "other_proxy"
      }
    ]
  }
}

4. Configure the settings: Replace the placeholders in the configuration file with your actual proxy settings:

• your_socks5_proxy_ip: Replace with your SOCKS5 proxy IP address.
• your_socks5_proxy_port: Replace with your SOCKS5 proxy port number.
• your_socks5_username: Replace with your SOCKS5 proxy username, if required.
• your_socks5_password: Replace with your SOCKS5 proxy password, if required.
• your_other_proxy_ip: Replace with the IP address of your other server-side proxy.
• your_other_proxy_port: Replace with the port number of your other server-side proxy.
• your_user_id: Replace with your user ID for the other server-side proxy.
• your_alter_id: Replace with your alter ID for the other server-side proxy.

5. Restart V2Ray: Restart your V2Ray service to apply the new configuration. Depending on your system, you can use one of the following commands:

sudo systemctl restart v2ray

or

sudo service v2ray restart

Now, your V2Ray client is configured to proxy Netflix traffic to your specified SOCKS5 proxy, and other traffic is routed to your other server-side proxy.

Hi, I am in China and have surfshark openvpn files. it works good. but after few hours vpn just stop. So I am thinking to use it with v2ray. should I change anything in v2ray configure file ?

@zpoint @ALL
Hi,
Can I use Trojan instead of v2ray?
If it's possible, could you provide me with a guide?

I believe v2ray already supports the use of trojan (https://github.com/v2fly/v2ray-core/tree/master/proxy/trojan), so you can still follow the original guide on this gist, but use trojan instead of vmess protocol on the inbound config block for your server. And on your client v2ray, use trojan on the outbound config. https://www.v2fly.org/en_US/v5/config/proxy/trojan.html

thank you so much^^

@zpoint @ackl @mehdi198080

Hi,
I tried to test, OK. no problem.
curl --socks5 [::1]:9050

But, I seem to having an issue with the v2ray config
help me !

Here is my v2ray conf

---

`

{
"log" : {
"access": "/var/log/v2ray/access.log",
"error": "/var/log/v2ray/error.log",
"loglevel": "warning"
},

"inbound": {
"port": 20478,
"protocol": "vmess",
"settings": {
"clients": [
{
"id": "2ccbe244-96e4-4ae1-b761-3d86666f6a93",
"encryption": "aes-128-gcm",
"level": 1,
"alterId": 64
}
]
},
"streamSettings": {
"network": "ws"
},
"sniffing": {
"enabled": true,
"destOverride": [
"http",
"tls"
]
}
},

"outbound": [
{
"protocol": "socks",
"settings": {
"servers": [{
"port": 9050,
"address": "localhost"
}]
},
"streamSettings": {
"tcpSettings": {
"header": {
"type": "none"
}
},
"network": "tcp",
"security": "none"
},
"tag": "streaming"
}
],

"routing": {
"domainStrategy": "IPOnDemand",
"rules": [
{
"type": "field",
"domain": [
"domain:btstatic.com",
"domain:netflix.com",
"domain:netflix.net",
"domain:nflxext.com",
"domain:nflximg.com",
"domain:nflximg.net",
"domain:nflxsearch.net",
"domain:nflxso.net",
"domain:nflxvideo.net",
"domain:ipaddress.com"
],
"outboundTag": "streaming"
}
]
}
}

`

redirect-gateway def1

hey there I'm having the same problem but I don't know how to check for the redirect-gateway def1 option in my OpenVPN config can you help me with this?

@oops10101 You just need to open the ,ovpn config file and try CTRL-F for the string 'redirect-gateway def1'

Oh I see I did that that but line wasn't present in my file but unfortunately my problem persists. Thank you for answering

…

On Sat, Aug 17, 2024, 2:10 AM Andrew Low ***@***.***> wrote: ***@***.**** commented on this gist. ------------------------------ @oops10101 <https://github.com/oops10101> You just need to open the ,ovpn config file and try CTRL-F for the string 'redirect-gateway def1' — Reply to this email directly, view it on GitHub <https://gist.github.com/zpoint/df2483c6beb97816e34ddbde3f62f5d8#gistcomment-5156912> or unsubscribe <https://github.com/notifications/unsubscribe-auth/BJEKZRTV7MIGM4J2GI72GNLZRZ5WXBFKMF2HI4TJMJ2XIZLTSKBKK5TBNR2WLJDUOJ2WLJDOMFWWLO3UNBZGKYLEL5YGC4TUNFRWS4DBNZ2F6YLDORUXM2LUPGBKK5TBNR2WLJDHNFZXJJDOMFWWLK3UNBZGKYLEL52HS4DFVRZXKYTKMVRXIX3UPFYGLK2HNFZXIQ3PNVWWK3TUUZ2G64DJMNZZDAVEOR4XAZNEM5UXG5FFOZQWY5LFVEYTAMBQGYYDANJZU52HE2LHM5SXFJTDOJSWC5DF> . You are receiving this email because you were mentioned. Triage notifications on the go with GitHub Mobile for iOS <https://apps.apple.com/app/apple-store/id1477376905?ct=notification-email&mt=8&pt=524675> or Android <https://play.google.com/store/apps/details?id=com.github.android&referrer=utm_campaign%3Dnotification-email%26utm_medium%3Demail%26utm_source%3Dgithub> .