Skip to content

Instantly share code, notes, and snippets.

View volkmax777's full-sized avatar
🍊
Я русский

volkmax777

🍊
Я русский
1 follower · 17 following
View GitHub Profile
@DartPower
DartPower / Astra.md
Last active December 1, 2025 16:33
Astra Linux ISO / Коллекция ссылок на Astra Linux
@TheUnrealZaka
TheUnrealZaka / HidingRoot.md
Last active December 5, 2025 11:30
This guide is for all Android devices to hide properly all root detections and successfully run banking apps as expected :)

✨ Welcome to TheUnrealZaka's Guide for Hiding Root Detections!

Using KernelSU-Next + SuSFS

⚠️ Disclaimer: This guide is provided solely for educational purposes. The creator assumes no responsibility for any damage, data loss, or other adverse effects that may occur as a result of following these instructions. Proceed entirely at your own risk!

📖 Introduction

Many users who have rooted their devices finds issues where system or third-party applications detect the root status and refuse to operate. This guide outlines a procedure to hide root detection on the majority of Android devices, specifically the ones running Noble ROM for Samsung S9/S9+/N9. The approach detailed here leverages KernelSU-Next in conjunction with SuSFS.

@barmaley6699
barmaley6699 / Zapret,vpn и chatgpt.txt
Last active September 21, 2025 22:09
Zapret,vpn и chatgpt
Решил я совместить все бесплатные обходы для стабильного и быстрого интернета. Я не понимаю в програмировании,
не понимаю в linux, в основном копипастю. Много читал, искал и решил сам написать и собратть в одном месте.
Хорошо, что Github еще не заблокирован. Начнем!
Нужен роутер с минимум 256мб оперативки и 128мб памятью. (ax3000t и ax6000 redmi - проверял на них)
1. Устанавливаем zapret (2-й способ). https://gist.github.com/barmaley6699/37b10173481f69e10d824faef541352f
2. Ставим https-dns-proxy и luci-app-https-dns-proxy .
# Провайдер - Comss Dns(ru)
Bootstrap DNS -https://dns.comss.one/dns-query
@danpawlik
danpawlik / Openwrt 802.11r + 802.11k + 802.11v + 802.11w.md
Last active October 13, 2025 22:39

OpenWRT wireless configuration with enabled Fast Roaming (802.11r)


                                  +---------------------------------------+                 
+---------------------------------|-----+                                 |                 
|                                 |     |                                 |                 
|                                 |     |                                 |                 
|              MAIN               |     |            AP1                  |                 
|      +--------------------+     |     |      +------------------+       |
@valorad
valorad / InstallingXRDP.md
Created June 5, 2022 13:18
Installing xrdp

Ubuntu:

sudo apt install xrdp 
sudo adduser xrdp ssl-cert 
sudo systemctl restart xrdp

Fedora:

@meeas
meeas / DebianSid_on_LUKS-BTRFS_with_systemd-boot.md
Last active November 17, 2025 12:38
For installing Debian Sid with LUKS2 encrypted BTRFS filesystem with Systemd-boot and rEFInd bootloaders plus an option for dualboot to Windows

For directly installing Debian Sid not supported by the Debian installer, namely:

  • Single LUKS2 encrypted partition which contains the full installation
  • Single BTRFS filesystem (integrated home partition)
  • Encrypted swapfile in BTRFS subvolume (supports laptop suspend but not hibernate)
  • Uses systemd-boot bootloader (instead of Grub2, also optional rEFInd instructions)
  • Minimal Gnome install (plus instructions for any other DE you wish)
  • Proper user groups for common security tools like sudo-less Wireshark, etc...
  • Optional removal of crypto keys from RAM during laptop suspend
  • Optional configurations for laptops (including fingerprint readers)
@s-h-a-d-o-w
s-h-a-d-o-w / dkms-module-signing.md
Created October 3, 2021 10:55
Make DKMS sign kernel modules on installation, with full script support and somewhat distro independent

This gist was originally written by dop3j0e

On systems with UEFI Secure Boot enabled, recent Linux kernels will only load signed modules, so it's about time DKMS grew the capability to sign modules it's building.

These scripts are extended and scriptified variants of https://computerlinguist.org/make-dkms-sign-kernel-modules-for-secure-boot-on-ubuntu-1604.html and https://askubuntu.com/questions/760671/could-not-load-vboxdrv-after-upgrade-to-ubuntu-16-04-and-i-want-to-keep-secur/768310#768310 and add some error checking, a passphrase around your signing key, and support for compressed modules.

dkms-sign-module is a wrapper for the more generic sign-modules which can

@bluewalk
bluewalk / GetNordVPNWireGuardDetails.md
Last active November 18, 2025 01:13
Getting NordVPN WireGuard details

About

Instructions to obtain WireGuard details of your NordVPN account. These can be used to setup a WireGuard tunnel on your router to NordVPN.

Source: https://forum.gl-inet.com/t/configure-wireguard-client-to-connect-to-nordvpn-servers/10422/27

Prerequisites

If you have any linux machine, use that or install a vm if you don't have one.

Get their official linux app installed. Make sure you have wireguard installed too. And set the used technology to Nordlynx by running nordvpn set technology nordlynx

@YoEight
YoEight / improve_fonts.md
Created January 15, 2021 10:11 — forked from j1cs/improve_fonts.md
Improve fonts archlinux

Improve Fonts

Newest

Make your Arch fonts beautiful easily! This is what I do when I install Arch Linux to improve the fonts.

You may consider the following settings to improve your fonts for system-wide usage without installing a patched font library packages (eg. Infinality):

Install some fonts, for example:
sudo pacman -S ttf-dejavu ttf-liberation noto-fonts

@SeJIya
SeJIya / Sercomm RV6699 в режим моста (Ростелеком) x Keenetic Speedster (KN-3010)
Last active August 28, 2025 18:31
Sercomm RV6699 в режим моста:
1. Выключаем RV6699 и отсоединяем от него оптику, затем включаем, ждём его загрузки
2. Подключаемся к LAN1 порту RV6699
3. Заходим по адресу: 192.168.0.1
4. ОБЯЗАТЕЛЬНО для входа используем:
login: superadmin
pass: COM_eng.2001{GPON Serial Number последних 5 символов} [1]
* столкнулся не на своём RV6699 с тем, что эта пара логина/пароля не подходит, возможно пароль для этого пользователя был сменён, поэтому как вариант -> сейв бекапа -> ресет к заводским -> ещё раз проверка возможности логина под этой учёткой
5. ОБЯЗАТЕЛЬНО: Необходимо убедится что станционное оборудование - Huawai (иначе все дальнейшие действия бесполезны) [3]
6. Configure -> GPON