Thesse commands are handled within function _scrn_svr_iom_nfy_fct
Each button needs to be pressed within 3 seconds of each other
The commands can also be entered with the drv.ir.rx.sq MTK CLI command e.g.:
CLI(CLI_drv.ir.rx.sq 0x9F002)
Thesse commands are handled within function _scrn_svr_iom_nfy_fct
Each button needs to be pressed within 3 seconds of each other
The commands can also be entered with the drv.ir.rx.sq MTK CLI command e.g.:
CLI(CLI_drv.ir.rx.sq 0x9F002)
| Category | Model/Module | |
|---|---|---|
| Audio>Audio | (Archived 20030804201828) | |
| Home Theater System | NAV-E900/E600 | |
| TV>TV | (Archived 20031216131304) | |
| Digital TV | KDE-P50HZ1/KDE-P42HZ1 | |
| Digital TV | KDE-P61HX2N/KDE-P50HX2N/KDE-P42HX2N | |
| Digital TV | KDE-P61HX2/KDE-P50HX2/KDE-P42HX2 | |
| Digital TV | KDE-P42HV2/KDE-P37HV2/KDE-P32HV2 | |
| Digital TV | KDL-L42HX2/KDL-L32HX2/KDL-L28HX2 | |
| Digital TV | KD-36HR500/KD-32HR500/KD-28HR500 |
| #!/bin/bash | |
| # Setting up a MCE (Media Center Edition)/eHome/RC6 remote | |
| # receiver/tranceiver/IR blaster on Linux for PS2 power/reset control | |
| # Instructions tested on Ubuntu 24.04.3 LTS | |
| # Known working devices: | |
| # Sony PCVA-IR6U | |
| # Sony PCVA-IR8U | |
| # Other devices (untested): | |
| # HP 5188-1667 | |
| # HP 5187-4593 |
| List info based on https://web.archive.org/web/20120717055235/https://products.sel.sony.com/opensource/source_tv.shtml | |
| --- | |
| https://www.sony.com/electronics/support/res/manuals/W000/W0005789M.pdf | |
| KDP-51WS550 2003 | |
| KDP-57WS550 2003 | |
| KDP-65WS550 2003 |
| ps2-0100j-20000117.bin.extracted/KERNEL | |
| ps2-0110a-20000727.bin.extracted/KERNEL | |
| ps2-0120a-20000902.bin.extracted/KERNEL | |
| ps2-0150a-20001228.bin.extracted/KERNEL | |
| ps2-0160a-20010427.bin.extracted/KERNEL | |
| ps2-0160a-20011004.bin.extracted/KERNEL | |
| ps2-0160a-20020207.bin.extracted/KERNEL | |
| ps2-0160e-20020319.bin.extracted/KERNEL | |
| ps2-0160h-20020426.bin.extracted/KERNEL |
| Mar 30 2010 | |
| 20:18:31 | |
| /ms/mssony/abk/bin | |
| exec_ | |
| /rom/bin | |
| preboot | |
| autoboot | |
| /rom | |
| /ram | |
| message |
| // dvr_hdd0: raw access by hdl-dump UDP protocol | |
| // This is a mashup of OPL, hdl-dump, and wLaunchELF code | |
| // NOTE: System hangs after 10GB transferred so (requiring force restart each time). | |
| // NOTE: Thus not working in its current state | |
| #include <stdio.h> | |
| #include <kernel.h> | |
| #include <iopcontrol.h> | |
| #include <iopheap.h> | |
| #include <debug.h> |
| --- gcc-2.96-20000731/gcc/config/mips/mips.c 2000-07-18 14:15:50.000000000 -0500 | |
| +++ ee/gcc/src/gcc/config/mips/mips.c 2001-04-22 19:58:34.000000000 -0500 | |
| @@ -114,6 +114,25 @@ | |
| static int symbolic_expression_p PARAMS ((rtx)); | |
| static void mips_add_gc_roots PARAMS ((void)); | |
| +/* Describe a builtin function. | |
| + Needed here so that it can be used in the protoypes below. */ | |
| +struct builtin_description | |
| +{ |
| // Detect jumper position of System 256 if in 246+ or 256 mode | |
| void test(void) | |
| { | |
| uint64_t v4 = 0; | |
| int64_t v5 = 0; | |
| for (int i = 0; i < 10; i += 1) | |
| { | |
| int64_t TimerSystemTime = GetTimerSystemTime(); | |
| DelayThread(16666); | |
| v4 += GetTimerSystemTime() - TimerSystemTime; |
| XPD-005 | |
| 1-863-466-21 | |
| CXD9764GP | |
| (C)2003SCEI | |
| 6TT6XBG001 | |
| TAIWAN 0413HAL | |
| E6821YA |