Для обхода блокировки достаточно отправить 1 любой udp пакет, тем самым нарушим начальное определение протокола WireGuard
Способ с использованием Windows PowerShell. Без скачивания Nmap и подобного софта.
Добавим в него "ListenPort", это позволит иметь статичный порт на котором будет работать WireGuard
Нажмите ПКМ на нужный "туннель" и выберите "Редактировать выбранный туннель..."
После DNS добавляем новую строку
| Meta (Instagram, Facebook) | |
| // Узлы | |
| 157.240.253.174, 157.240.253.172, 157.240.253.167, 157.240.253.63, 157.240.253.32 | |
| 157.240.252.174, 157.240.252.172, 157.240.252.167, 157.240.252.63, 157.240.252.38 | |
| 57.144.112.34, 57.144.110.1, 157.240.205.174, 87.245.223.97 | |
| // Подсети | |
| 213.102.128.0/24 | |
| 204.15.20.0/22 | |
| 199.201.0.0/16 |
| """ | |
| Structlog example configuration with FastAPI. | |
| Features: | |
| - async bound logger | |
| - contextvars to log request-id and other meta data | |
| - custom format for default logging loggers and structlog loggers | |
| """ | |
| import asyncio | |
| import logging |
| package main | |
| import "fmt" | |
| // Builder | |
| type Computer struct { | |
| CPU string | |
| RAM int | |
| MB string |
| blueprint: | |
| name: Moisture Sensor | |
| description: Perform action when moisture sensor turns wet | |
| domain: automation | |
| input: | |
| actions: | |
| name: Actions | |
| description: | |
| Notifications or similar to be run. {{ trigger.event.data.new_state.attributes.friendly_name | |
| }} will be the name of the sensor |
| # $ golangci-lint run --config=~/.golangci.yml ./... > lint.txt | |
| version: "2" | |
| linters: | |
| enable: | |
| - asasalint | |
| - asciicheck | |
| - bidichk | |
| - bodyclose | |
| - canonicalheader |
| blueprint: | |
| name: Low battery level detection & notification for all battery sensors | |
| description: Regularly test all sensors with 'battery' device-class for crossing | |
| a certain battery level threshold and if so execute an action. | |
| domain: automation | |
| input: | |
| threshold: | |
| name: Battery warning level threshold | |
| description: Battery sensors below threshold are assumed to be low-battery (as | |
| well as binary battery sensors with value 'on'). |
Follow these short instructions on how to compile Go for Apple Silicon (M1). From here on out, we may simply refer to it as the "ARM device".
This entire process should only take about 5-10 minutes, but please read through everything carefully, in order to avoid any potential issues along the way.
Note that at the time of writing this, Go was not yet officially available for Apple's ARM.
