Controller (DS4, Duelsense, Xbox, etc.) Overclock Guide with Secure Boot ON/ENABLED via LordOfMice/Hidusbf

Controller_Overclock_Guide_with_Secure_Boot_Enabled.md

Controller (DS4, Duelsense, Xbox, etc.) Overclock Guide with Secure Boot ON via LordOfMice/Hidusbf for Windows 10/11

Guide created by rstewa35

Update 12/14/24

Removed the registry steps since the drivers are now signed. This should allow you to use hidusbf without affecting secure boot. If you still want to see them, look at the previous revision of this guide.

Warning

Use the guide at your own risk. Read the warnings/risks HERE.

Step 1

• Clone or download this repo: hidusbf.
• Unzip hidusbf.zip
  • If you downloaded the repo as a ZIP file you'll need to unzip hidusbf-master.zip and then hidusbf.zip.
• Inside the hidusbf directory (hidusbf-master/hidusbf/) double-click SweetLow.CER to install the certificate.

Step 2

• Inside the DRIVER directory (hidusbf-master/hidusbf/DRIVER/) run Setup.exe as administrator.
• Click the drop-down menu on the top left of the window and select All.
• Find your controller and click on it, highlighting it in the window.

Step 3

• Click on the Install Service button at the bottom of the window and select yes on the window that pops up.
• In the drop-down menu to the left of Selected Rate at the bottom, select the polling rate you want your controller at (for most people this will be 1000).
• Now, click on the Filter On Device checkbox in the bottom left corner, enabling it.
• Finally, unplug your controller from your computer and then plug it back in.
• It will look like this when you're done:

That's it, you're done!

Removing/Disabling

Disabling the Overclocking

To disable the overclocking, you just need to run setup.exe again and uncheck the Filter On Device checkbox in the bottom left corner.

Completely Removing Hidusbf

To completely remove the Hidusbf driver and/or reinstall the stock Windows driver you need to:

• Go to the DRIVER directory in file explorer (hidusbf-master/hidusbf/DRIVER/)
• Right click the HIDUSBFU.INF file and click on Install

• Restart your computer and you're done!

I've tried to make it work but the only way it has so far is disabling memory integrity from windows security settings

MY DUDE THANK YOU VERY MUCH I DID EVERYTHING IN THE WHOLE WEB AND DID NOTHING YOUR GODLY SETTINGS WORKED I HOPE U AND YOUR FAMILY ARE FOREVER HAPPY🤩

MY DUDE THANK YOU VERY MUCH I DID EVERYTHING IN THE WHOLE WEB AND DID NOTHING YOUR GODLY SETTINGS WORKED I HOPE U AND YOUR FAMILY ARE FOREVER HAPPY🤩

Glad it helped you

when i click on install service i get an error

Hey, anytime I run setup.exe nothing loads im out of ideas on how to fix this

Hey, anytime I run setup.exe nothing loads im out of ideas on how to fix this

Did you run it as administrator?

i did all this and it show blnterval 1 with 1000hz, but when i test it through gamepadla it still 250hz with 4ms delay, anyone can tell me it is working or not

help me pls i have this error, i can,t unistall

help me pls i have this error, i can,t unistall

What error? And if you scroll to the bottom of this guide there is a section called Completely Removing Hidusbf that tells you how to uninstall it.

ayuda porafavor solo me funciono la primera vez, despues prendu mi laptop y no esta a 1ms, es peor esta a 10ms y el control es de 2ms pero no va asi

I've tried to make it work but the only way it has so far is disabling memory integrity from windows security settings

once you've overclocked your controller, could i remove the setup and app to turn back on memory integrity or i need to keep memory integrity off in order to stay overclocked?

Hi there, at step 3, when I click install service, no window to confirm popsup, instead the INF file opens in Notepad. When I try to do it again checking the Filter on Device, I get error message. Any idea what am I doing wrong ?

@Flisker

Hi there, at step 3, when I click install service, no window to confirm popsup, instead the INF file opens in Notepad. When I try to do it again checking the Filter on Device, I get error message. Any idea what am I doing wrong ?

I would check that:

1. Are you running Setup.exe as administrator?
2. Do you have the correct device selected when you click on install service?
3. Are HIDUSBF.INF and HIDUSBF_AS.INF in the same directory as Setup.exe?
   

@rstewa Wow, thanks for super fast reply! I found out what was the issue, it's kinda obvious. I had "Open with" set to notepad on INF files. So I reset the association to default and bam the Install Service now seems to work.

So I did the initial install service and then with the filter checkbox and now it shows correctly I think: https://i.imgur.com/4v1Y72p.png

But, when trying to run XInputTest_1000_Samples.exe or Polling.exe, the two polling tools I found quickly, it acts weird, the Xinput is throwing error and the polling.exe doesn't detect the controller most of the time and when I disconnect/reconnect it shows up but when I run the test it's not working, it's not doing anything. So I can't test if I'm still at 125hz or not :(

At least the controller still works in game :D

Edit: managed to get the polling.exe work, but it's still showing 125hz, no matter what I set in the tool.

Underclocking is working but I can't even go upto 250hz. Btw I am trying this on a HP Victus 16 laptop and a HP wireless office mouse. Pls help

I am not able to uninstall the files so I can turn back on memory integrity. The guide doesn’t look like that on my PC. When I right click HIDUSBFU.INF, I don’t have the option to install. Only “open” and it opens to like a bunch of notes or something. I’ve already overclocked. Now I’m trying to turn it off and have the PC normal.

edit : seems to work after I extracted all again.

@rstewa Wow, thanks for super fast reply! I found out what was the issue, it's kinda obvious. I had "Open with" set to notepad on INF files. So I reset the association to default and bam the Install Service now seems to work.

So I did the initial install service and then with the filter checkbox and now it shows correctly I think: https://i.imgur.com/4v1Y72p.png

But, when trying to run XInputTest_1000_Samples.exe or Polling.exe, the two polling tools I found quickly, it acts weird, the Xinput is throwing error and the polling.exe doesn't detect the controller most of the time and when I disconnect/reconnect it shows up but when I run the test it's not working, it's not doing anything. So I can't test if I'm still at 125hz or not :(

At least the controller still works in game :D

Edit: managed to get the polling.exe work, but it's still showing 125hz, no matter what I set in the tool.

Xbox controllers are locked at 125Hz polling rate.

I think that by default .inf files are opened by Windows with Notepad. How did you reset the association to default? What do you mean?

@rstewa @rstewa
I’d like some clarification because I’ve seen different people do different things.
Should ‘install service’ be clicked only once after selecting the controller? And then afterwards select ‘filter on device’ and the Hz (without clicking ‘install service’ again)?
As for disabling the overclock, is it enough to just uncheck ‘filter on device’, without setting the Hz back to ‘default’ and without clicking on ‘install service’?

Followed this tutorial, seed to work ok, but pressing touchpad would case my game to fire the gun

Issue "fixed" disabling secure boot, but i still need it enabled for some games