setup ovirtmgmt network with static ip via vdsm-client

setup_ovirtmgmt.sh

echo '{"bondings": {}, "networks": {"ovirtmgmt": {"nic": "eth0", "netmask": "255.255.255.0", "ipaddr": "1.1.1.2", "gateway": "1.1.1.1", "defaultRoute": true}}, "options": {"connectivityCheck": false}}' | vdsm-client -f - Host setupNetworks
vdsm-client Host setSafeNetworkConfig

@phoracek Hi, Why did I specify mode=1 and actually mode=0?

echo '{
  "bondings": {
    "bond1": {
      "nics": ["ens34", "ens38"],
      "mode": 1
    }
  },
  "networks": {
    "mgmtnet": {
      "bonding": "bond1",
      "bootproto": "static",
      "ipaddr": "10.17.38.33",
      "netmask": "255.255.255.0",
      "gateway": "10.17.38.1", 
      "defaultRoute": true
    }
  },
  "options": {
    "connectivityCheck": false
  }
}' | vdsm-client -f - Host setupNetworks

vdsm-client Host setSafeNetworkConfig

@thissuper hey. I don't know why you used mode 1. AFAIK you can select any of the supported modes.

@phoracek I read redhat documentation, ovirt should support mode 1. Did I make a mistake in my json?
Very confused, I think you may know, so consult you.

Sorry, I don't understand what you are asking. When you apply the JSON you shared above, does it fail?

Sorry, I don't understand what you are asking. When you apply the JSON you shared above, does it fail?

Sorry, I was busy with other things these days, so I couldn't reply to you in time.

I am binding the network configuration of the ovirt host to make the ens192 interface and ens224 interface bonding1, but it is actually bonding0. Did I make a mistake in my json?

English is not my native language, so it may not be accurate enough. Please see shell below

[root@node-1 ~]# echo '{
  "bondings": {
    "bond1": {
      "nics": ["ens192", "ens224"],
      "mode": 1
    }
  },
  "networks": {
    "mgmtnet": {
      "bonding": "bond1",
      "bootproto": "static",
      "ipaddr": "10.17.35.52",
      "netmask": "255.255.255.0",
      "gateway": "10.17.35.1", 
      "defaultRoute": true
    }
  },
  "options": {
    "connectivityCheck": false
  }
}' | vdsm-client -f - Host setupNetworks

[root@node-1 ~]# vdsm-client Host setSafeNetworkConfig

[root@node-1 ~]# 
[root@node-1 ~]# cat /etc/sysconfig/network-scripts/ifcfg-bond1
# Generated by VDSM version 4.20.32-1.el7
DEVICE=bond1
BONDING_OPTS=mode=0
BRIDGE=mgmtnet
ONBOOT=yes
MTU=1500
DEFROUTE=no
NM_CONTROLLED=no
IPV6INIT=no
[root@node-1 ~]#
[root@node-1 ~]# cat /etc/sysconfig/network-scripts/ifcfg-ens192
# Generated by VDSM version 4.20.32-1.el7
DEVICE=ens192
MASTER=bond1
SLAVE=yes
ONBOOT=yes
MTU=1500
DEFROUTE=no
NM_CONTROLLED=no
IPV6INIT=no
[root@node-1 ~]#
[root@node-1 ~]# cat /etc/sysconfig/network-scripts/ifcfg-ens224
# Generated by VDSM version 4.20.32-1.el7
DEVICE=ens224
MASTER=bond1
SLAVE=yes
ONBOOT=yes
MTU=1500
DEFROUTE=no
NM_CONTROLLED=no
IPV6INIT=no
[root@node-1 ~]#