Skip to content

Instantly share code, notes, and snippets.

@nraynaud

nraynaud/Notes Sojourner.md

Last active May 24, 2025 12:23
Show Gist options

  • Select an option

    Learn more about clone URLs
  • Save nraynaud/5c7613d876f10c5df6f3ec480461bce5 to your computer and use it in GitHub Desktop.

Select an option

Learn more about clone URLs
Save nraynaud/5c7613d876f10c5df6f3ec480461bce5 to your computer and use it in GitHub Desktop.
Download ZIP
Notes on the mechanical design of the Sojourner rover
Raw
Notes Sojourner.md

Notes on the mechanical design of the Sojourner rover

Nicolas Raynaud, February 2025

Wanting to build a fun robot mower, I studied the Sojourner rover as a base for my design. Looking at online 3D models, I fell into the rabbit hole of accuracy of historical artefact description. My goal in this document is to show the smart that JPL put in this little rover.

Marie Curie

The Marie Curie rover is a double for Sojourner, two rovers were built at the same time and the best one was selected to be sent to space. Today the Marie Curie rover is exposed at the National Air and Space Museum in DC. Most high resolution photos available are from this rover since the other one left earth in 1996, fong before we had hight resolution digital cameras in our pockets.

Differences with Sojourner

  • the antenna hook has been removed
  • the Wheel Abrasion Experiment is missing
  • the Material Adhesion Experiment is missing (but the notch is here)
  • the front solar panel bumper has been cut and re-painted without respecting the 10cm pattern

Document search

A lot of scientific publications have clues about the inner working of the rover. Some of them are so old that the pictures are very bad, but sometimes the publisher has a better copy in print.

JPL archives were not forthcoming with high res pictures, they had contentions with a documentation precise enough to be able to build a replica of the rover, it is US Federal IP and they don't want to encourage copies. I didn't push the discussion further to avoid wasting my correspondent's time, they didn't give me any references about archives policies.

The old JPL website is still available on the Wayback Machine: https://web.archive.org/web/20160118204242/http://mars.jpl.nasa.gov/MPF/rovercom/pixt.html.

Follow-up missions used the same building block as Sojourner, in particular, the cancelled '01 Surveyor mission and the INSIGHT mission1.

The most important documents are the very high resolution pictures (8688×5792px) of Marie Curie taken the Air and Space Museum in DC, they are available in Open Acces

The rover telemetry is available online.

Off-the-shelf parts

Commercial parts can help make sense of scale on the pictures.

  • Most screws are assumed to be metric2.
  • The motors are Maxon RE163 (sometimes "RE016") with a single output shaft4, whose documentation is still available online.
  • The potentiometers are BI precision 61735 (identified by the part number on pictures), whose documentation is also available online.
  • The gearboxes are described as "Globe Motors" 5 stages planetary gearboxes, but sadly this company has disappeared and I couldn't identify the gearbox

Documented dimensions

They are generally ambiguous, I have color coded the various instances of the same dimension.

  • $${\color{red}630 \space mm}$$ long 6
  • cleats that protrude 10 millimeters 6
  • $${\color{magenta}79-millimeter}$$-wide wheels 6
  • Each wheel of the rover is $${\color{cyan}13 \space cm}$$ in diameter and $${\color{magenta}6 \space cm}$$ wide 7
  • the rover has a 74cm turning diameter 7
  • The rover is $${\color{red}65 \space cm}$$ in length, $${\color{green}48 \space cm}$$ wide and $${\color{yellow}30 \space cm}$$ tall in its deployed configuration 7
  • In this stowed position, the rover height is reduced to $${\color{orange}19 \space cm}$$. 7
  • In the deployed configuration, the rover has ground clearance of 15cm. 7
  • solar panel comprised of 13 strings of 18, GaAs cells each of size 2cm by 4cm. 7
  • wheel radius $${\color{cyan}(6.5 \space cm)}$$ 7
  • (APXS) a 0.076 m diameter bumper 8
  • $${\color{red}68 \space cm}$$ long by $${\color{green}48 \space cm}$$ wide by $${\color{yellow}28 \space cm}$$ high 9
  • Deployed Dimensions, cm: Length $${\color{red}62}$$, Width $${\color{green}47}$$, Height $${\color{yellow}32}$$ 10
  • Wheels (Six), cm: Diameter $${\color{cyan}13}$$, Width $${\color{magenta}6}$$ 10
  • Forward camera separation 12.56 cm 10
  • Approximate (camera) height above surface 26 cm 10
  • The rover stands $${\color{yellow}300 \space mm}$$ tall but stows to $${\color{orange}180 \space mm}$$ 11
  • Sojourner, when stowed, is $${\color{red}650 \space mm}$$ long and $${\color{green}480 \space mm}$$ wide with $${\color{cyan}130 \space mm}$$ diameter wheels, $${\color{magenta}80 \space mm}$$ wide. 11
  • The wheel cleats protrude 10 millimeters 12
  • The wheels are $${\color{magenta}79 \space millimeters}$$ wide 12
  • Sojourner (Figures 1 & 2) is a six-wheeled vehicle $${\color{red}68 \space cm}$$ long, $${\color{green}48 \space cm}$$ wide, and $${\color{yellow}28 \space cm}$$ high (with 17 cm ground clearance)13
  • one dimension was found in a photogrammetry paper: "Taking the distances between point 1 and 4 or 2 and 3, the rover was measured to have a length of 41.6 and 42.8 cm, respectively, in excellent agreement with the nominal size of 41.6 cm."14

Footnotes

  1. "The [Instrument Deployment Arm (IDA)] originated as the robotic arm built for the Jet Propulsion Laboratory (JPL) for the cancelled Mars 2001 Surveyor mission in 1998. The IDA is slated for refurbishment" Fleischner, R., “InSight Instrument Deployment Arm”, in 15th European Space Mechanisms and Tribology Symposium, 2013, vol. 718, Art. no. 14. https://esmats.eu/esmatspapers/pastpapers/pdfs/2013/fleischner.pdf ↩

  2. "With few exceptions, all Pathfinder’s parts are metric sized, from its nuts and bolts to its 10-kilogram (22-pound) robotic rover" https://www.latimes.com/archives/la-xpm-1995-02-21-mn-34480-story.html ↩

  3. "the Maxon RE016 motor which had been used successfully on the Mars Sojourner Rover" Braun, David & Noon, Don. (1998). "Long life" DC brush motor for use on the Mars surveyor program. https://www.researchgate.net/publication/23604427_Long_life_DC_brush_motor_for_use_on_the_Mars_surveyor_program ↩

  4. "in the 2 years between the Sojourner and Robotic Arm programs, Maxon began offering ball bearings and a double-ended shaft on the RE016" ibid. ↩

  5. "Steering position was read directly via a conductive plastic Beckman potentiometer" Eisen, Howard & Buck, Carl & Gillis-Smith, Greg & Umland, Jeffrey. (1997). Mechanical Design of the Mars Pathfinder Mission. ↩

  6. Bickler, D. (April 1, 1998). "Roving Over Mars." ASME. Mechanical Engineering. April 1998; 120(04): 74–77. https://doi.org/10.1115/1.1998-APR-6 ↩ ↩2 ↩3

  7. Matijevic, J. (1997) "Sojourner: The Mars Pathfinder Microrover Flight Experiment" preprint https://ntrs.nasa.gov/citations/20060034938 ↩ ↩2 ↩3 ↩4 ↩5 ↩6 ↩7

  8. Blomquist, R. S., “The Alpha-Proton-X-ray Spectrometer deployment mechanism: an anthropomorphic approach to sensor placement on Martian rocks and soil”, in 29th Aerospace Mechanisms Symposium, 1995, pp. 61–78. https://ntrs.nasa.gov/api/citations/19950020845/downloads/19950020845.pdf ↩

  9. Cooper, B. (June 1, 1998), "Driving on the Surface of Mars Using the Rover Control Workstation" https://citeseerx.ist.psu.edu/document?repid=rep1&type=pdf&doi=aa6b2554315747f2399d41b9f2c362d95748b8f3 ↩

  10. (1997), The Pathfinder Microrover, J. Geophys. Res., 102(E2), 3989–4001, doi:10.1029/96JE01922 https://agupubs.onlinelibrary.wiley.com/doi/epdf/10.1029/96JE01922 ↩ ↩2 ↩3 ↩4

  11. Eisen, H. J. "Mechanical Design of the Mars Pathfinder Mission", 1997ESASP.410..293E, https://adsabs.harvard.edu/full/1997ESASP.410..293E ↩ ↩2

  12. Bickler, D. (December 1, 1997) "The Mars Rover Mobility System" https://web.archive.org/web/20100526143429/http://trs-new.jpl.nasa.gov/dspace/bitstream/2014/18908/1/98-0011.pdf ↩ ↩2

  13. Wilcox, B., and Nguyen, T., "Sojourner on Mars and Lessons Learned for Future Planetary Rovers," SAE Technical Paper 981695, 1998, https://doi.org/10.4271/981695. ↩

  14. Oberst, J. and Hauber, E. and Trauthan, F. and Kuschel, M. and Giese, B. and Roatsch, T. and Jaumann, R. (1998) Mars Pathfinder: Photogrammetric processing of lander images. International Archives of Photogrammetry and Remote Sensing, 32 (Part 4), pp. 436-443. https://citeseerx.ist.psu.edu/document?repid=rep1&type=pdf&doi=26bdd608f9ece8a8417adfb931b99389693513ec ↩

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment