i3-config

# set modifier to windows key
set $mod Mod4

# Font for window titles. Will also be used by the bar unless a different font
# is used in the bar {} block below.
# font pango:monospace 8
# font pango:FiraCode Nerd Font 12
font pango:FiraCode Nerd Font 8 
# font pango:FiraCode Nerd Font 15 

# Start XDG autostart .desktop files using dex. See also
# https://wiki.archlinux.org/index.php/XDG_Autostart
exec --no-startup-id dex-autostart --autostart --environment i3

# xss-lock grabs a logind suspend inhibit lock and will use i3lock to lock the
# screen before suspend. Use loginctl lock-session to lock your screen.
# exec --no-startup-id xss-lock --transfer-sleep-lock -- i3lock --nofork
exec --no-startup-id xss-lock --transfer-sleep-lock -- betterlockscreen -l dimblur

bindsym $mod+Shift+q exec --no-startup-id betterlockscreen -l dimblur

# Use pactl to adjust volume in PulseAudio.
set $refresh_i3status killall -SIGUSR1 i3status
bindsym XF86AudioRaiseVolume exec --no-startup-id pactl set-sink-volume @DEFAULT_SINK@ +10% && $refresh_i3status
bindsym XF86AudioLowerVolume exec --no-startup-id pactl set-sink-volume @DEFAULT_SINK@ -10% && $refresh_i3status
bindsym XF86AudioMute exec --no-startup-id pactl set-sink-mute @DEFAULT_SINK@ toggle && $refresh_i3status
bindsym XF86AudioMicMute exec --no-startup-id pactl set-source-mute @DEFAULT_SOURCE@ toggle && $refresh_i3status

# Brightness controls
# make sure you allow users to sudo these files without a password
bindsym XF86MonBrightnessUp exec sudo ~/.bin/brightness.sh up
bindsym XF86MonBrightnessDown exec sudo ~/.bin/brightness.sh down


bindsym XF86Display exec ~/.bin/switch_screen.sh

# Use Mouse+$mod to drag floating windows to their wanted position
floating_modifier $mod

# # move tiling windows via drag & drop by left-clicking into the title bar,
# # or left-clicking anywhere into the window while holding the floating modifier.
# tiling_drag modifier titlebar

# start a terminal
bindsym $mod+Return exec kitty

# kill focused window
bindsym $mod+q kill

# bindsym $mod+space exec --no-startup-id rofi -show run
bindsym $mod+space exec --no-startup-id rofi -show drun

# change focus
bindsym $mod+h focus left
bindsym $mod+j focus down
bindsym $mod+k focus up
bindsym $mod+l focus right

# alternatively, you can use the cursor keys:
bindsym $mod+Left focus left
bindsym $mod+Down focus down
bindsym $mod+Up focus up
bindsym $mod+Right focus right

# move focused window
bindsym $mod+Shift+h move left
bindsym $mod+Shift+j move down
bindsym $mod+Shift+k move up
bindsym $mod+Shift+l move right

# alternatively, you can use the cursor keys:
bindsym $mod+Shift+Left move left
bindsym $mod+Shift+Down move down
bindsym $mod+Shift+Up move up
bindsym $mod+Shift+Right move right

# split in horizontal orientation
bindsym $mod+Shift+v split h

# split in vertical orientation
bindsym $mod+v split v

# enter fullscreen mode for the focused container
bindsym $mod+f fullscreen toggle

# change container layout (stacked, tabbed, toggle split)
bindsym $mod+s layout stacking
bindsym $mod+w layout tabbed
bindsym $mod+e layout toggle split

# toggle tiling / floating
bindsym $mod+Shift+space floating toggle

# change focus between tiling / floating windows
# bindsym $mod+space focus mode_toggle

# focus the parent container
bindsym $mod+a focus parent

# focus the child container
bindsym $mod+d focus child

# Define names for default workspaces for which we configure key bindings later on.
# We use variables to avoid repeating the names in multiple places.
set $ws1 "1"
set $ws2 "2"
set $ws3 "3"
set $ws4 "4"
set $ws5 "5"
set $ws6 "6"
set $ws7 "7"
set $ws8 "8"
set $ws9 "9"
set $ws10 "10"

# switch to workspace
bindsym $mod+1 workspace number $ws1
bindsym $mod+2 workspace number $ws2
bindsym $mod+3 workspace number $ws3
bindsym $mod+4 workspace number $ws4
bindsym $mod+5 workspace number $ws5
bindsym $mod+6 workspace number $ws6
bindsym $mod+7 workspace number $ws7
bindsym $mod+8 workspace number $ws8
bindsym $mod+9 workspace number $ws9
bindsym $mod+0 workspace number $ws10

# move focused container to workspace
bindsym $mod+Shift+1 move container to workspace number $ws1
bindsym $mod+Shift+2 move container to workspace number $ws2
bindsym $mod+Shift+3 move container to workspace number $ws3
bindsym $mod+Shift+4 move container to workspace number $ws4
bindsym $mod+Shift+5 move container to workspace number $ws5
bindsym $mod+Shift+6 move container to workspace number $ws6
bindsym $mod+Shift+7 move container to workspace number $ws7
bindsym $mod+Shift+8 move container to workspace number $ws8
bindsym $mod+Shift+9 move container to workspace number $ws9
bindsym $mod+Shift+0 move container to workspace number $ws10

bindsym $mod+Tab workspace back_and_forth

# reload the configuration file
bindsym $mod+Shift+c reload
# restart i3 inplace (preserves your layout/session, can be used to upgrade i3)
bindsym $mod+Shift+r restart
# exit i3 (logs you out of your X session)
bindsym $mod+Shift+e exec "i3-nagbar -t warning -m 'You pressed the exit shortcut. Do you really want to exit i3? This will end your X session.' -B 'Yes, exit i3' 'i3-msg exit'"

# resize window (you can also use the mouse for that)
mode "resize" {
        # These bindings trigger as soon as you enter the resize mode

        # Pressing left will shrink the window’s width.
        # Pressing right will grow the window’s width.
        # Pressing up will shrink the window’s height.
        # Pressing down will grow the window’s height.
        bindsym h resize shrink width 10 px or 10 ppt
        bindsym j resize grow height 10 px or 10 ppt
        bindsym k resize shrink height 10 px or 10 ppt
        bindsym l resize grow width 10 px or 10 ppt

        # same bindings, but for the arrow keys
        bindsym Left resize shrink width 10 px or 10 ppt
        bindsym Down resize grow height 10 px or 10 ppt
        bindsym Up resize shrink height 10 px or 10 ppt
        bindsym Right resize grow width 10 px or 10 ppt

        # back to normal: Enter or Escape or $mod+r
        bindsym Return mode "default"
        bindsym Escape mode "default"
        bindsym $mod+r mode "default"
}

bindsym $mod+r mode "resize"

# Start i3bar to display a workspace bar (plus the system information i3status
# finds out, if available)
bar {
        position top
        status_command i3status
        # font pango:JetBrains Nerd Font 10 
        # font pango:FiraCode Nerd Font  12
        font pango:FiraCode Nerd Font  8
}

# for_window [title="firefox"] border none

# colors for window decorations.
# class                 border  backgr. text    indicator child_border
client.focused          #ffffff #002e91 #ffffff #ffff00   #ffffff
client.focused_inactive #333333 #5f676a #ffffff #484e50   #5f676a
client.unfocused        #333333 #222222 #888888 #292d2e   #222222
client.urgent           #2f343a #900000 #ffffff #900000   #900000
client.placeholder      #000000 #000000 #ffffff #000000   #000000

client.background       #ffffff

smart_gaps on
gaps inner 5
gaps outer 2

# NetworkManager applet
exec --no-startup-id nm-applet

# set background
exec_always --no-startup-id ~/.fehbg
# exec --no-startup-id glava -d

# enable touchpad speed and tapping
exec --no-startup-id ~/.bin/set_touchpad.sh

# start compositor
# exec --no-startup-id picom --config ~/.config/picom/dleyna-renderer-service.conf
exec --no-startup-id picom --config ~/.config/picom/picom.conf

# # volume applet
exec --no-startup-id pasystray

# clipboard manager
exec --no-startup-id parcellite

exec --no-startup-id redshift-gtk


# # set capslock to ctrl
# exec --no-startup-id setxkbmap -option "ctrl:nocaps"

# # set screen
# exec --no-startup-id ~/.bin/switch_screen.sh

# add keybindings for copy and paste
bindsym --release $mod+y exec --no-startup-id xdotool key --clearmodifiers Ctrl+Insert
bindsym --release $mod+p exec --no-startup-id xdotool key --clearmodifiers Shift+Insert


# zoom stuff
for_window [class="(.*join\?action\=join.*|.*zoom.*)"] floating enable
for_window [class="(.*join\?action\=join.*|.*zoom.*)" title="Zoom - Licensed Account"] floating disable
for_window [class="(.*join\?action\=join.*|.*zoom.*)" title="Zoom - Free Account"] floating disable
for_window [class="(.*join\?action\=join.*|.*zoom.*)" title="Zoom Meeting"] floating disable

# exec_always --no-startup-id ~/.config/i3/autotiling/autotiling/autotiling

bindsym Print exec "flameshot gui"