Dell Display Manager 2.0 command line documentation

DDM2.0.md

Dell Display Manager 2.0 Command Line

Decompiled DLL with ILSpy to identify various commands.

Most commands can be found in DDM2._0_UX.CmdBackground.cmdService_DoWork

Write commands can be prefixed with int:command to specify which monitor to send the command to.

.\DDM.exe /0:writebrightnesslevel 50

Read command output is only shown in the debug console.

Debugging Console

Used to show the output of various read commands

.\DDM.exe /console start

Commands

.\DDM.exe /console start Opens DDM Console

.\DDM.exe /readbrightnesslevel Reads the monitor brightness level

.\DDM.exe /writebrightnesslevel Sets the monitor brightness level

.\DDM.exe /readcontrastlevel Reads the monitor contrast level

.\DDM.exe /writecontrastlevel Sets the monitor contrast level

.\DDM.exe /readcapabilities Read monitor capabilities (in hex)

.\DDM.exe /readsupportedcontrols Read monitor supported controls (in hex)

.\DDM.exe /writecolorpreset Write color presets

.\DDM.exe /readcolorpreset Read color presets

.\DDM.exe /readorientation Read monitor orientation

.\DDM.exe /writeorientation Sets monitor orientation

.\DDM.exe /readmonitoractivehours Read monitor active hours

.\DDM.exe /writeactiveinput

.\DDM.exe /readactiveinput

.\DDM.exe /writepower

.\DDM.exe /writeosdlanguage

.\DDM.exe /osd

.\DDM.exe /readedid

.\DDM.exe /writeuc

.\DDM.exe /readmax

.\DDM.exe /readprivacy

.\DDM.exe /writeprivacy

.\DDM.exe /readfirmwareversion

.\DDM.exe /writevolume

.\DDM.exe /readvolume

.\DDM.exe /autocolorpreset

.\DDM.exe /swapvideo

.\DDM.exe /swapusb

.\DDM.exe /writesubinput

.\DDM.exe /writepxpmode

.\DDM.exe /writepxp

.\DDM.exe /readcontrol

.\DDM.exe /increasecontrol

.\DDM.exe /decreasecontrol

.\DDM.exe /writecontrol

.\DDM.exe /readpossible

.\DDM.exe /autosetup

.\DDM.exe /readmanufactureddate

.\DDM.exe /writemonitorpower

.\DDM.exe /readdisplaymode

.\DDM.exe /writeoptimalresolution

.\DDM.exe /readtiming

.\DDM.exe /readassetattributes

.\DDM.exe /log

.\DDM.exe /savediagnosticreport

.\DDM.exe /assetreport

.\DDM.exe /inventory

.\DDM.exe /surveyonly

.\DDM.exe /readdecodededid

.\DDM.exe /countmonitorsci

.\DDM.exe /monitornumber OR countmonitors

.\DDM.exe /usbpassthrough

.\DDM.exe /lockupdate

.\DDM.exe /noupdate

.\DDM.exe /screennotification

.\DDM.exe /lockrorate

.\DDM.exe /autostartup

.\DDM.exe /powernap

.\DDM.exe /colormanagement

.\DDM.exe /writeapplanguage

.\DDM.exe /telemetry

.\DDM.exe /writeealayout

.\DDM.exe /writeimportpermission

.\DDM.exe /displaymodel

.\DDM.exe /writeloglevel

.\DDM.exe /liveupdate") && ApplicationStartUp.Ota != null)

.\DDM.exe /rescan to refresh the connected devices -Thanks @rtxbae!

Some examples of using the utility on MacOS to enable picture by picture, thanks @sepl2604!

/Applications/DDPM/DDPM.app/Contents/MacOS/DDPM /writepxp pbp-2h-fill USB-C HDMI1 Activate 50-50 PBP

/Applications/DDPM/DDPM.app/Contents/MacOS/DDPM /writepxp off Turn off PBP

Has anyone seen the issue when starting up the app for the first time the screen is blank and does not detect your monitor? We have noticed that on quite a few U3821 and U3824 monitors, wanted to see if I should run a command line to force it to detect the usb-c monitor?

Here is the format I used for enabling and controlling placement of PBP: DDM.exe /writepxpmode pbp HDMI DP ~ please note that I had to roll back to the prior version of the application 2.3.022 as the updated version no longer supported the functionality correctly.