Skip to content

Instantly share code, notes, and snippets.

@lucmann

lucmann/v4.9.dmesg

Created January 10, 2026 12:23
Show Gist options

  • Select an option

    Learn more about clone URLs
  • Save lucmann/e1504b4300dd4a94b32a26f4032b3856 to your computer and use it in GitHub Desktop.

Select an option

Learn more about clone URLs
Save lucmann/e1504b4300dd4a94b32a26f4032b3856 to your computer and use it in GitHub Desktop.
Download ZIP
hikey970 v4.9 boot log
Raw
v4.9.dmesg
EFI stub: Booting Linux Kernel...
EFI stub: EFI_RNG_PROTOCOL unavailable, no randomness supplied
EFI stub: Using DTB from configuration table
EFI stub: Exiting boot services and installing virtual address map...
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.9.78-147541-g16035b0edcf4 (root@test) (gcc version 7.3.0 (Ubuntu/Linaro 7.3.0-16ubuntu3) ) #10 SMP PREEMPT Mon Sep 3 13:30:24 UTC 2018
[ 0.000000] Boot CPU: AArch64 Processor [410fd034]
[ 0.000000] earlycon: pl11 at MMIO 0x00000000fff32000 (options '115200')
[ 0.000000] bootconsole [pl11] enabled
[ 0.000000] efi: Getting EFI parameters from FDT:
[ 0.000000] efi: EFI v2.60 by EDK II
[ 0.000000] efi: MEMATTR=0xbe6a9a98
[ 0.000000] Ion: base 0xbc800000, size is 0x1e00000, node name graphic, heap-name carveout_gralloc namesize 17,[99][97][114][118]
[ 0.000000] Ion: insert heap-name carveout_gralloc
[ 0.000000] OF: reserved mem: initialized node graphic, compatible id hisi_ion
[ 0.000000] cma: Reserved 64 MiB at 0x00000000b3400000
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.1 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] percpu: Embedded 22 pages/cpu @ffff8001bfed7000 s49944 r8192 d31976 u90112
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: enabling workaround for ARM erratum 845719
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1542042
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/Image-hikey970-v4.9.gz earlycon=pl011,0xfff32000,115200 clk_ignore_unused=true console=tty0 console=ttyAMA6,115200n8 root=/dev/sdd12 rootwait rw debug loglevel=7 initcall_debug dw_mmc.debug=1 efi=noruntime
[ 0.000000] log_buf_len individual max cpu contribution: 4096 bytes
[ 0.000000] log_buf_len total cpu_extra contributions: 28672 bytes
[ 0.000000] log_buf_len min size: 16384 bytes
[ 0.000000] log_buf_len: 65536 bytes
[ 0.000000] early log buf free: 14056(85%)
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.000000] software IO TLB [mem 0xaf400000-0xb3400000] (64MB) mapped at [ffff8000af400000-ffff8000b33fffff]
[ 0.000000] Memory: 5965448K/6266076K available (12348K kernel code, 1114K rwdata, 5448K rodata, 4096K init, 542K bss, 235092K reserved, 65536K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] modules : 0xffff000000000000 - 0xffff000008000000 ( 128 MB)
[ 0.000000] vmalloc : 0xffff000008000000 - 0xffff7dffbfff0000 (129022 GB)
[ 0.000000] .text : 0xffff000008080000 - 0xffff000008c90000 ( 12352 KB)
[ 0.000000] .rodata : 0xffff000008c90000 - 0xffff0000091f0000 ( 5504 KB)
[ 0.000000] .init : 0xffff0000091f0000 - 0xffff0000095f0000 ( 4096 KB)
[ 0.000000] .data : 0xffff0000095f0000 - 0xffff000009706a00 ( 1115 KB)
[ 0.000000] .bss : 0xffff000009706a00 - 0xffff00000978e434 ( 543 KB)
[ 0.000000] fixed : 0xffff7dfffe7fb000 - 0xffff7dfffec00000 ( 4116 KB)
[ 0.000000] PCI I/O : 0xffff7dfffee00000 - 0xffff7dffffe00000 ( 16 MB)
[ 0.000000] vmemmap : 0xffff7e0000000000 - 0xffff800000000000 ( 2048 GB maximum)
[ 0.000000] 0xffff7e0000000000 - 0xffff7e0007000000 ( 112 MB actual)
[ 0.000000] memory : 0xffff800000000000 - 0xffff8001c0000000 ( 7168 MB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
[ 0.000000] NR_IRQS:64 nr_irqs:64 0
[ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 1.92MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x1c570327e, max_idle_ns: 1763180809505 ns
[ 0.000003] sched_clock: 56 bits at 1920kHz, resolution 520ns, wraps every 4398046510977ns
[ 0.008663] Calibrating delay loop (skipped), value calculated using timer frequency.. 3.84 BogoMIPS (lpj=7680)
[ 0.018863] pid_max: default: 32768 minimum: 301
[ 0.023561] Security Framework initialized
[ 0.027700] SELinux: Initializing.
[ 0.031263] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.038209] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.046747] sched-energy: Sched-energy-costs installed from DT
[ 0.052648] CPU0: update cpu_capacity 360
[ 0.056723] ASID allocator initialised with 32768 entries
[ 0.094268] /soc/interrupt-controller@0xf4000000: Unable to locate ITS domain
[ 0.101584] /soc/interrupt-controller@0xf4000000: unable to locate ITS domain
[ 0.109604] EFI runtime services will be disabled.
[ 0.162718] Detected VIPT I-cache on CPU1
[ 0.162753] CPU1: update cpu_capacity 360
[ 0.162755] CPU1: Booted secondary processor [410fd034]
[ 0.194730] Detected VIPT I-cache on CPU2
[ 0.194747] CPU2: update cpu_capacity 360
[ 0.194749] CPU2: Booted secondary processor [410fd034]
[ 0.226764] Detected VIPT I-cache on CPU3
[ 0.226780] CPU3: update cpu_capacity 360
[ 0.226781] CPU3: Booted secondary processor [410fd034]
[ 0.259303] Detected VIPT I-cache on CPU4
[ 0.259309] CPU features: SANITY CHECK: Unexpected variation in SYS_ID_AA64MMFR0_EL1. Boot CPU: 0x00000000001122, CPU4: 0x00000000101122
[ 0.259313] CPU features: Unsupported CPU feature variation detected.
[ 0.259328] CPU4: update cpu_capacity 1024
[ 0.259329] CPU4: Booted secondary processor [410fd092]
[ 0.290838] Detected VIPT I-cache on CPU5
[ 0.290842] CPU features: SANITY CHECK: Unexpected variation in SYS_ID_AA64MMFR0_EL1. Boot CPU: 0x00000000001122, CPU5: 0x00000000101122
[ 0.290853] CPU5: update cpu_capacity 1024
[ 0.290854] CPU5: Booted secondary processor [410fd092]
[ 0.322876] Detected VIPT I-cache on CPU6
[ 0.322879] CPU features: SANITY CHECK: Unexpected variation in SYS_ID_AA64MMFR0_EL1. Boot CPU: 0x00000000001122, CPU6: 0x00000000101122
[ 0.322891] CPU6: update cpu_capacity 1024
[ 0.322892] CPU6: Booted secondary processor [410fd092]
[ 0.354915] Detected VIPT I-cache on CPU7
[ 0.354918] CPU features: SANITY CHECK: Unexpected variation in SYS_ID_AA64MMFR0_EL1. Boot CPU: 0x00000000001122, CPU7: 0x00000000101122
[ 0.354929] CPU7: update cpu_capacity 1024
[ 0.354931] CPU7: Booted secondary processor [410fd092]
[ 0.354978] Brought up 8 CPUs
[ 0.507916] SMP: Total of 8 processors activated.
[ 0.512668] CPU features: detected feature: 32-bit EL0 Support
[ 0.518782] CPU: All CPU(s) started at EL2
[ 0.522946] alternatives: patching kernel code
[ 0.529481] devtmpfs: initialized
[ 0.540642] DMI not present or invalid.
[ 0.544673] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.554527] futex hash table entries: 2048 (order: 6, 262144 bytes)
[ 0.561478] pinctrl core: initialized pinctrl subsystem
[ 0.567416] NET: Registered protocol family 16
[ 0.572168] schedtune: init normalization constants...
[ 0.577359] schedtune: CLUSTER[0-3] min_pwr: 0 max_pwr: 55
[ 0.583952] schedtune: CPU[0] min_pwr: 0 max_pwr: 283
[ 0.590543] schedtune: CPU[1] min_pwr: 0 max_pwr: 283
[ 0.597134] schedtune: CPU[2] min_pwr: 0 max_pwr: 283
[ 0.603724] schedtune: CPU[3] min_pwr: 0 max_pwr: 283
[ 0.610316] schedtune: CLUSTER[4-7] min_pwr: 0 max_pwr: 218
[ 0.616906] schedtune: CPU[4] min_pwr: 0 max_pwr: 1105
[ 0.623498] schedtune: CPU[5] min_pwr: 0 max_pwr: 1105
[ 0.630089] schedtune: CPU[6] min_pwr: 0 max_pwr: 1105
[ 0.636680] schedtune: CPU[7] min_pwr: 0 max_pwr: 1105
[ 0.643273] schedtune: SYSTEM min_pwr: 0 max_pwr: 5825
[ 0.649866] schedtune: using normalization constants mul: 1745268256 sh1: 1 sh2: 12
[ 0.657601] schedtune: configured to support 5 boost groups
[ 0.683239] cpuidle: using governor ladder
[ 0.703379] cpuidle: using governor menu
[ 0.707695] vdso: 2 pages (1 code @ ffff000008c97000, 1 data @ ffff0000095f4000)
[ 0.715178] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.722406] DMA: preallocated 256 KiB pool for atomic allocations
[ 0.728849] Serial: AMBA PL011 UART driver
[ 0.733223] pstore: using zlib compression
[ 0.737599] console [pstore-1] enabled
[ 0.741384] pstore: Registered ramoops as persistent store backend
[ 0.747624] ramoops: attached 0x100000@0x20a00000, ecc: 0/0
[ 0.753552] pinctrl-single e896c000.pinmux: 459 pins at pa ffff000008047000 size 1836
[ 0.761689] pinctrl-single fff11000.pinmux: 463 pins at pa ffff000008049000 size 1852
[ 0.769680] pinctrl-single fc182000.pinmux: 10 pins at pa ffff00000804b000 size 40
[ 0.777390] pinctrl-single ff37e000.pinmux: 12 pins at pa ffff00000804d000 size 48
[ 0.785273] pinctrl-single e896c800.pinmux: 459 pins at pa ffff00000804f800 size 1836
[ 0.793416] pinctrl-single fff11800.pinmux: 463 pins at pa ffff000008051800 size 1852
[ 0.801395] pinctrl-single fc182800.pinmux: 10 pins at pa ffff000008053800 size 40
[ 0.809106] pinctrl-single ff37e800.pinmux: 12 pins at pa ffff000008055800 size 48
[ 0.839883] ffd74000.serial: ttyAMA3 at MMIO 0xffd74000 (irq = 6, base_baud = 0) is a PL011 rev2
[ 0.849013] fdf01000.serial: ttyAMA4 at MMIO 0xfdf01000 (irq = 7, base_baud = 0) is a PL011 rev2
[ 0.858062] fff32000.serial: ttyAMA6 at MMIO 0xfff32000 (irq = 8, base_baud = 0) is a PL011 rev2
[ 0.866948] console [ttyAMA6] enabled
[ 0.866948] console [ttyAMA6] enabled
[ 0.874302] bootconsole [pl11] disabled
[ 0.874302] bootconsole [pl11] disabled
[ 0.882148] hisi-dma64 fdf30000.dma: dma_channels:0x10 dma_requests:0x20 dma_min_chan:0x1
[ 0.891037] hisi-dma64 fdf30000.dma: initialized
[ 0.895651] hisi-dma64 fdf30000.dma: hisi_dma64_probe ok!
[ 0.904476] HISI SPMI probe
[ 0.931604] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.938739] pl061_gpio e8a0b000.gpio: PL061 GPIO chip @0x00000000e8a0b000 registered
[ 0.946661] pl061_gpio e8a0c000.gpio: PL061 GPIO chip @0x00000000e8a0c000 registered
[ 0.954551] pl061_gpio e8a0d000.gpio: PL061 GPIO chip @0x00000000e8a0d000 registered
[ 0.962439] pl061_gpio e8a0e000.gpio: PL061 GPIO chip @0x00000000e8a0e000 registered
[ 0.970325] pl061_gpio e8a0f000.gpio: PL061 GPIO chip @0x00000000e8a0f000 registered
[ 0.978204] pl061_gpio e8a10000.gpio: PL061 GPIO chip @0x00000000e8a10000 registered
[ 0.986086] pl061_gpio e8a11000.gpio: PL061 GPIO chip @0x00000000e8a11000 registered
[ 0.993974] pl061_gpio e8a12000.gpio: PL061 GPIO chip @0x00000000e8a12000 registered
[ 1.001859] pl061_gpio e8a13000.gpio: PL061 GPIO chip @0x00000000e8a13000 registered
[ 1.009740] pl061_gpio e8a14000.gpio: PL061 GPIO chip @0x00000000e8a14000 registered
[ 1.017618] pl061_gpio e8a15000.gpio: PL061 GPIO chip @0x00000000e8a15000 registered
[ 1.025502] pl061_gpio e8a16000.gpio: PL061 GPIO chip @0x00000000e8a16000 registered
[ 1.033384] pl061_gpio e8a17000.gpio: PL061 GPIO chip @0x00000000e8a17000 registered
[ 1.041265] pl061_gpio e8a18000.gpio: PL061 GPIO chip @0x00000000e8a18000 registered
[ 1.049145] pl061_gpio e8a19000.gpio: PL061 GPIO chip @0x00000000e8a19000 registered
[ 1.057024] pl061_gpio e8a1a000.gpio: PL061 GPIO chip @0x00000000e8a1a000 registered
[ 1.064905] pl061_gpio e8a1b000.gpio: PL061 GPIO chip @0x00000000e8a1b000 registered
[ 1.072790] pl061_gpio e8a1c000.gpio: PL061 GPIO chip @0x00000000e8a1c000 registered
[ 1.080685] pl061_gpio fff28000.gpio: PL061 GPIO chip @0x00000000fff28000 registered
[ 1.088571] pl061_gpio fff29000.gpio: PL061 GPIO chip @0x00000000fff29000 registered
[ 1.096451] pl061_gpio e8a1f000.gpio: PL061 GPIO chip @0x00000000e8a1f000 registered
[ 1.104327] pl061_gpio e8a20000.gpio: PL061 GPIO chip @0x00000000e8a20000 registered
[ 1.112207] pl061_gpio fff0b000.gpio: PL061 GPIO chip @0x00000000fff0b000 registered
[ 1.120090] pl061_gpio fff0c000.gpio: PL061 GPIO chip @0x00000000fff0c000 registered
[ 1.127978] pl061_gpio fff0d000.gpio: PL061 GPIO chip @0x00000000fff0d000 registered
[ 1.135872] pl061_gpio fff0e000.gpio: PL061 GPIO chip @0x00000000fff0e000 registered
[ 1.143757] pl061_gpio fff0f000.gpio: PL061 GPIO chip @0x00000000fff0f000 registered
[ 1.151644] pl061_gpio fff10000.gpio: PL061 GPIO chip @0x00000000fff10000 registered
[ 1.159526] pl061_gpio fff1d000.gpio: PL061 GPIO chip @0x00000000fff1d000 registered
[ 1.167471] ACPI: Interpreter disabled.
[ 1.187683] vgaarb: loaded
[ 1.190488] SCSI subsystem initialized
[ 1.194409] ssp-pl022 ffd70000.spi: ARM PL022 driver, device ID: 0x00041022
[ 1.201388] ssp-pl022 ffd70000.spi: mapped registers from 0x00000000ffd70000 to ffff0000098d9000
[ 1.210198] ssp-pl022 ffd70000.spi: setup for DMA on RX dma0chan0, TX dma0chan1
[ 1.217821] usbcore: registered new interface driver usbfs
[ 1.223320] usbcore: registered new interface driver hub
[ 1.228670] usbcore: registered new device driver usb
[ 1.233737] tcpc_class_init_1.1.1_G
[ 1.237223] TCPC class init OK
[ 1.240280] Init Richtek RegMap
[ 1.243920] Linux video capture interface: v2.00
[ 1.248552] pps_core: LinuxPPS API ver. 1 registered
[ 1.253515] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 1.262654] PTP clock support registered
[ 1.266639] dmi: Firmware registration failed.
[ 1.271157] Registered efivars operations
[ 1.275252] Ion: invalid heap-name in node iommu_info, please check the name
[ 1.282388] Ion: invalid heap-name in node linear, please check the name
[ 1.289182] Ion: node name [heap_sys_user], heap-name [sys_heap]
[ 1.295189] Ion: heap index 0 : name sys_heap base 0x0 size 0x0 id 0 type 0
[ 1.302145] Ion: heap sys_heap base =0, try to find dynamic area
[ 1.308235] Ion: name = sys_heap, table name carveout_gralloc
[ 1.314062] Ion: name = sys_heap, table name
[ 1.318501] Ion: name = sys_heap, table name
[ 1.322939] Ion: name = sys_heap, table name
[ 1.327378] Ion: name = sys_heap, table name
[ 1.331821] Ion: node name [heap_carveout_gralloc], heap-name [carveout_gralloc]
[ 1.339215] Ion: heap index 1 : name carveout_gralloc base 0x0 size 0x0 id 2 type 2
[ 1.346866] Ion: heap carveout_gralloc base =0, try to find dynamic area
[ 1.353649] Ion: name = carveout_gralloc, table name carveout_gralloc
[ 1.360171] Ion: have found heap name carveout_gralloc base = 0xbc800000, size 31457280
[ 1.368170] in hisi_ion_enable_iommu start
[ 1.372272] of_get_iova_info:start_addr 0x40000, size 0xbffc0000 align 0x8000
[ 1.379405] in hisi_ion_enable_iommu end
[ 1.383319] Ion: id 0 name sys_heap base 0 size 0
[ 1.388139] Ion: adding heap sys_heap of type 0 with 0@0
[ 1.393445] Ion: id 1 name carveout_gralloc base 3162505216 size 31457280
[ 1.403946] Ion: adding heap carveout_gralloc of type 2 with bc800000@1e00000
[ 1.411232] Advanced Linux Sound Architecture Driver Initialized.
[ 1.417554] Bluetooth: Core ver 2.22
[ 1.421134] NET: Registered protocol family 31
[ 1.425576] Bluetooth: HCI device and connection manager initialized
[ 1.431929] Bluetooth: HCI socket layer initialized
[ 1.436805] Bluetooth: L2CAP socket layer initialized
[ 1.441862] Bluetooth: SCO socket layer initialized
[ 1.446994] no hisilicon,hisi-pmic-irq-num1 property set
[ 1.452304] hisi_pmic 2-00: the platform don't support ext-interrupt.
[ 1.458803] [hisi_pmic_probe]. pmic->irqs[0] = 304
[ 1.463597] [hisi_pmic_probe]. pmic->irqs[1] = 305
[ 1.468393] [hisi_pmic_probe]. pmic->irqs[2] = 306
[ 1.473186] [hisi_pmic_probe]. pmic->irqs[3] = 307
[ 1.477983] [hisi_pmic_probe]. pmic->irqs[4] = 308
[ 1.482777] [hisi_pmic_probe]. pmic->irqs[5] = 309
[ 1.487572] [hisi_pmic_probe]. pmic->irqs[6] = 310
[ 1.492366] [hisi_pmic_probe]. pmic->irqs[7] = 311
[ 1.497160] [hisi_pmic_probe]. pmic->irqs[8] = 312
[ 1.501955] [hisi_pmic_probe]. pmic->irqs[9] = 313
[ 1.506750] [hisi_pmic_probe]. pmic->irqs[10] = 314
[ 1.511629] [hisi_pmic_probe]. pmic->irqs[11] = 315
[ 1.516509] [hisi_pmic_probe]. pmic->irqs[12] = 316
[ 1.521389] [hisi_pmic_probe]. pmic->irqs[13] = 317
[ 1.526269] [hisi_pmic_probe]. pmic->irqs[14] = 318
[ 1.531147] [hisi_pmic_probe]. pmic->irqs[15] = 319
[ 1.536290] clocksource: Switched to clocksource arch_sys_counter
[ 1.542479] VFS: Disk quotas dquot_6.6.0
[ 1.546421] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.553440] pnp: PnP ACPI: disabled
[ 1.558498] <[hisi_dt_parse_ip_atf]: regulator_id=0, ppll0_clock_set_rate_flag=0>
[ 1.566123] <[hisi_dt_parse_ip_atf]: regulator_id=1, ppll0_clock_set_rate_flag=0>
[ 1.573636] vivobus: supplied by media1_subsys
[ 1.578088] <[hisi_ip_to_atf_is_enabled]:regulator_id=1>
[ 1.583490] <[hisi_dt_parse_ip_atf]: regulator_id=8, ppll0_clock_set_rate_flag=0>
[ 1.591077] <[hisi_dt_parse_ip_atf]: regulator_id=2, ppll0_clock_set_rate_flag=0>
[ 1.598580] vcodecsubsys: supplied by media2_subsys
[ 1.603465] <[hisi_ip_to_atf_is_enabled]:regulator_id=2>
[ 1.608881] <[hisi_dt_parse_ip_atf]: regulator_id=3, ppll0_clock_set_rate_flag=0>
[ 1.616382] dsssubsys: supplied by vivobus
[ 1.620484] <[hisi_ip_to_atf_is_enabled]:regulator_id=3>
[ 1.625883] <[hisi_dt_parse_ip_atf]: regulator_id=4, ppll0_clock_set_rate_flag=0>
[ 1.633385] ispsubsys: supplied by vivobus
[ 1.637486] <[hisi_ip_to_atf_is_enabled]:regulator_id=4>
[ 1.642891] <[hisi_dt_parse_ip_atf]: regulator_id=5, ppll0_clock_set_rate_flag=0>
[ 1.650393] vdec: supplied by vcodecsubsys
[ 1.654498] <[hisi_ip_to_atf_is_enabled]:regulator_id=5>
[ 1.659899] <[hisi_dt_parse_ip_atf]: regulator_id=6, ppll0_clock_set_rate_flag=0>
[ 1.667400] venc: supplied by vcodecsubsys
[ 1.671515] <[hisi_ip_to_atf_is_enabled]:regulator_id=6>
[ 1.676922] <[hisi_dt_parse_ip_atf]: regulator_id=7, ppll0_clock_set_rate_flag=0>
[ 1.684422] isp_srt: supplied by ispsubsys
[ 1.688529] <[hisi_ip_to_atf_is_enabled]:regulator_id=7>
[ 1.694047] NET: Registered protocol family 2
[ 1.698607] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 1.705998] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.712935] TCP: Hash tables configured (established 65536 bind 65536)
[ 1.719489] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 1.725608] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 1.732243] NET: Registered protocol family 1
[ 1.737057] kvm [1]: 8-bit VMID
[ 1.740191] kvm [1]: IDMAP page: c78000
[ 1.744025] kvm [1]: HYP VA range: 800000000000:ffffffffffff
[ 1.750220] kvm [1]: Hyp mode initialized successfully
[ 1.755385] kvm [1]: virtual timer IRQ4
[ 1.760457] audit: initializing netlink subsys (disabled)
[ 1.765882] audit: type=2000 audit(1.671:1): initialized
[ 1.771416] workingset: timestamp_bits=46 max_order=21 bucket_order=0
[ 1.780313] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.786228] Registering sdcardfs 0.1
[ 1.789983] fuse init (API version 7.26)
[ 1.794007] 9p: Installing v9fs 9p2000 file system support
[ 1.801056] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 1.808457] io scheduler noop registered
[ 1.812418] io scheduler cfq registered (default)
[ 1.817971] libphy: mdio_driver_register: phy-bcm-ns2-pci
[ 1.824682] Kirin-pcie f4000000.pcie: eye_param_vboost = [0xffffffff]
[ 1.831121] Kirin-pcie f4000000.pcie: eye_param_iboost = [0xffffffff]
[ 1.837560] Kirin-pcie f4000000.pcie: eye_param_pre = [0xffffffff]
[ 1.843735] Kirin-pcie f4000000.pcie: eye_param_post = [0xffffffff]
[ 1.850000] Kirin-pcie f4000000.pcie: eye_param_main = [0xffffffff]
[ 1.890796] OF: PCI: host bridge /soc/pcie@f4000000 ranges:
[ 1.896375] OF: PCI: MEM 0xf6000000..0xf7ffffff -> 0x00000000
[ 1.904681] Kirin-pcie f4000000.pcie: PCI host bridge to bus 0000:00
[ 1.911035] pci_bus 0000:00: root bus resource [bus 00-01]
[ 1.916520] pci_bus 0000:00: root bus resource [mem 0xf6000000-0xf7ffffff] (bus address [0x00000000-0x01ffffff])
[ 1.940389] pci 0000:01:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 1.963216] pci 0000:02:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 1.971338] pci 0000:02:04.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 1.979447] pci 0000:02:05.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 1.987559] pci 0000:02:07.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 1.995669] pci 0000:02:09.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 2.011081] pci 0000:00:00.0: BAR 0: assigned [mem 0xf6000000-0xf6ffffff]
[ 2.017871] pci 0000:00:00.0: BAR 14: assigned [mem 0xf7000000-0xf71fffff]
[ 2.024746] pci 0000:00:00.0: BAR 15: assigned [mem 0xf7200000-0xf72fffff pref]
[ 2.032052] pci 0000:00:00.0: BAR 13: no space for [io size 0x1000]
[ 2.038402] pci 0000:00:00.0: BAR 13: failed to assign [io size 0x1000]
[ 2.045101] pci 0000:01:00.0: BAR 14: assigned [mem 0xf7000000-0xf70fffff]
[ 2.051975] pci 0000:01:00.0: BAR 15: assigned [mem 0xf7200000-0xf72fffff 64bit pref]
[ 2.059802] pci 0000:01:00.0: BAR 0: assigned [mem 0xf7100000-0xf711ffff]
[ 2.066631] pci 0000:01:00.0: BAR 13: no space for [io size 0x1000]
[ 2.072980] pci 0000:01:00.0: BAR 13: failed to assign [io size 0x1000]
[ 2.079681] pci 0000:02:07.0: BAR 14: assigned [mem 0xf7000000-0xf70fffff]
[ 2.086553] pci 0000:02:07.0: BAR 15: assigned [mem 0xf7200000-0xf72fffff 64bit pref]
[ 2.094380] pci 0000:02:07.0: BAR 13: no space for [io size 0x1000]
[ 2.100731] pci 0000:02:07.0: BAR 13: failed to assign [io size 0x1000]
[ 2.107429] pci 0000:02:01.0: PCI bridge to [bus 03]
[ 2.112587] pci 0000:02:04.0: PCI bridge to [bus 04]
[ 2.117743] pci 0000:02:05.0: PCI bridge to [bus 05]
[ 2.122900] pci 0000:06:00.0: BAR 4: assigned [mem 0xf7200000-0xf7203fff 64bit pref]
[ 2.130796] pci 0000:06:00.0: BAR 2: assigned [mem 0xf7000000-0xf7000fff 64bit]
[ 2.138258] pci 0000:06:00.0: BAR 0: no space for [io size 0x0100]
[ 2.144520] pci 0000:06:00.0: BAR 0: failed to assign [io size 0x0100]
[ 2.151128] pci 0000:02:07.0: PCI bridge to [bus 06]
[ 2.156153] pci 0000:02:07.0: bridge window [mem 0xf7000000-0xf70fffff]
[ 2.162979] pci 0000:02:07.0: bridge window [mem 0xf7200000-0xf72fffff 64bit pref]
[ 2.170804] pci 0000:02:09.0: PCI bridge to [bus 07]
[ 2.175960] pci 0000:01:00.0: PCI bridge to [bus 02-07]
[ 2.181245] pci 0000:01:00.0: bridge window [mem 0xf7000000-0xf70fffff]
[ 2.188071] pci 0000:01:00.0: bridge window [mem 0xf7200000-0xf72fffff 64bit pref]
[ 2.195897] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[ 2.201123] pci 0000:00:00.0: bridge window [mem 0xf7000000-0xf71fffff]
[ 2.207908] pci 0000:00:00.0: bridge window [mem 0xf7200000-0xf72fffff pref]
[ 2.215284] pcieport 0000:00:00.0: Signaling PME through PCIe PME interrupt
[ 2.222246] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 2.228773] pci 0000:02:01.0: Signaling PME through PCIe PME interrupt
[ 2.235297] pci 0000:02:04.0: Signaling PME through PCIe PME interrupt
[ 2.241822] pci 0000:02:05.0: Signaling PME through PCIe PME interrupt
[ 2.248345] pci 0000:02:07.0: Signaling PME through PCIe PME interrupt
[ 2.254870] pci 0000:06:00.0: Signaling PME through PCIe PME interrupt
[ 2.261393] pci 0000:02:09.0: Signaling PME through PCIe PME interrupt
[ 2.268377] pcieport 0000:01:00.0: enabling device (0000 -> 0002)
[ 2.282423] pcieport 0000:02:07.0: enabling device (0000 -> 0002)
[ 2.294128] hisi-asp-dma e804b000.asp_dmac: initialized
[ 2.299919] xenfs: not registering filesystem on non-xen platform
[ 2.306530] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 2.313575] SuperH (H)SCI(F) driver initialized
[ 2.318262] msm_serial: driver initialized
[ 2.322516] [drm] Initialized
[ 2.325857] [drm] the device node is dpe
[ 2.329807] [drm] the device remote node is dsi
[ 2.334577] [drm] dss_pwm_clk:[80000000]->[83000000].
[ 2.339696] [drm] adv match_node ok
[ 2.343277] [drm] adv parse_dt ok , adv7511->type = 1 <0--ADV7511, 1--ADV7533>
[ 2.350573] [drm] adv75xx->vdd = 1800000
[ 2.354670] [drm] adv7533_init_regulators ok
[ 2.364045] [drm] adv get gpio_pd ok
[ 2.367785] [drm] adv devm_regmap_init_i2c ok
[ 2.372372] [drm] regmap_read ok, regmap_read Rev.= 20
[ 2.379921] [drm] host attach, client name=[mipi-hikey], id=1
[ 2.385790] [drm] dsi cur_client is 1 <0->hdmi;1->panel>
[ 2.391486] [drm] dss_version_tag=0x40.
[ 2.395355] [drm] dss irq = 64.
[ 2.398589] e8600000.dpe supply regulator_dsssubsys not found, using dummy regulator
[ 2.406348] e8600000.dpe supply regulator_media_subsys not found, using dummy regulator
[ 2.414379] in hisi_ion_enable_iommu start
[ 2.418472] ion domain already init return domain
[ 2.423249] [drm] host attach, client name=[adv7533], id=0
[ 2.428744] [drm] connector init
[ 2.431971] kirin-drm e8600000.dpe: bound e8601000.dsi (ops dsi_ops)
[ 2.438322] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 2.444933] [drm] No driver support for vblank timestamp query.
[ 2.450854] [drm] num_crtc=1, num_connector=2.
[ 2.455303] [drm:drm_helper_disable_unused_functions] *ERROR* Called for atomic driver, this is not what you want.
[ 2.465797] [drm] disconnected : regmap_read val = 0x90
[ 2.471245] [drm] disconnected : regmap_read val = 0x90
[ 2.496695] [drm] disconnected : regmap_read val = 0x90
[ 2.522141] [drm] disconnected : regmap_read val = 0x90
[ 2.547586] [drm] disconnected : regmap_read val = 0x90
[ 2.573032] [drm] disconnected : regmap_read val = 0x90
[ 2.598477] [drm] disconnected : regmap_read val = 0x90
[ 2.623922] [drm] disconnected : regmap_read val = 0x90
[ 2.649368] [drm] disconnected : regmap_read val = 0x90
[ 2.674814] [drm] disconnected : regmap_read val = 0x90
[ 2.700258] [drm] disconnected : regmap_read val = 0x90
[ 2.725568] [drm:adv7511_detect.isra.2] *ERROR* Read connector status timout, time = 10
[ 2.733653] [drm] hdmi connector status = 2
[ 2.741933] [drm] fbdev->smem_start = 0x262144, fbdev->screen_base = 0xffff00000d001000
[ 2.750034] kirin-drm e8600000.dpe: fb0: dss frame buffer device
[ 2.772512] [drm] Initialized kirin 1.0.0 20170309 on minor 0
[ 2.778375] mali e82c0000.mali: Continuing without Mali regulator control
[ 2.785455] mali e82c0000.mali: GPU identified as 0x1 arch 6.2.2 r0p0 status 1
[ 2.792836] mali e82c0000.mali: Using coherency mode 1 set from dtb
[ 2.799288] mali e82c0000.mali: Using configured power model mali-simple-power-model, and fallback mali-simple-power-model
[ 2.804294] Error reading temperature for gpu thermal zone: -22
[ 2.816474] mali e82c0000.mali: Probed as mali0
[ 2.824371] brd: module loaded
[ 2.829128] loop: module loaded
[ 2.832510] (stk) :sysfs entries created
[ 2.836467] (hci_tty): inside hci_tty_init
[ 2.840616] (hci_tty): allocated 242, 0
[ 2.844496] gpio_hub_probe: step in
[ 2.848140] gpio_hub_init:gpio hub init status:0
[ 2.853184] ufshcd-hisi ff3c0000.ufs: ufshcd_populate_vreg: Unable to find vdd-hba-supply regulator, assuming enabled
[ 2.863796] ufshcd-hisi ff3c0000.ufs: ufshcd_populate_vreg: Unable to find vcc-supply regulator, assuming enabled
[ 2.874057] ufshcd-hisi ff3c0000.ufs: ufshcd_populate_vreg: Unable to find vccq-supply regulator, assuming enabled
[ 2.884434] ufshcd-hisi ff3c0000.ufs: ufshcd_populate_vreg: Unable to find vccq2-supply regulator, assuming enabled
[ 2.912294] Error reading temperature for gpu thermal zone: -22
[ 2.937120] scsi host0: ufshcd
[ 2.948372] hisi_sas: driver version v1.6
[ 2.953491] libphy: Fixed MDIO Bus: probed
[ 2.957701] tun: Universal TUN/TAP device driver, 1.6
[ 2.962750] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 2.969021] CAN device driver interface
[ 2.983209] mcp251x spi32766.0 can0: MCP2515 successfully initialized.
[ 2.990113] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 2.995941] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 3.001885] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
[ 3.008844] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 3.014435] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
[ 3.022263] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[ 3.024298] Error reading temperature for gpu thermal zone: -22
[ 3.034115] sky2: driver version 1.30
[ 3.037881] r8168 Gigabit Ethernet driver 8.045.08 loaded
[ 3.043337] r8168 0000:06:00.0: enabling device (0000 -> 0002)
[ 3.071199] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625.
[ 3.082602] r8168 Copyright (C) 2017 Realtek NIC software team <nicfae@realtek.com>
[ 3.082602] This program comes with ABSOLUTELY NO WARRANTY; for details, please see <http://www.gnu.org/licenses/>.
[ 3.082602] This is free software, and you are welcome to redistribute it under certain conditions; see <http://www.gnu.org/licenses/>.
[ 3.113616] PPP generic driver version 2.4.2
[ 3.117942] PPP BSD Compression module registered
[ 3.122648] PPP Deflate Compression module registered
[ 3.127714] PPP MPPE Compression module registered
[ 3.128380] ufs final power mode: gear = 3, lane = 2, pwr = 1, rate = 2
[ 3.131916] ufshcd-hisi ff3c0000.ufs: ufshcd_find_max_sup_active_icc_level: Regulator capability was not set, actvIccLevel=0
[ 3.132235] scsi 0:0:0:49488: Well-known LUN SAMSUNG KLUCG4J1ED-B0C1 0300 PQ: 0 ANSI: 6
[ 3.132292] Error reading temperature for gpu thermal zone: -22
[ 3.164679] NET: Registered protocol family 24
[ 3.169201] usbcore: registered new interface driver asix
[ 3.174638] usbcore: registered new interface driver ax88179_178a
[ 3.180746] usbcore: registered new interface driver cdc_ether
[ 3.186591] usbcore: registered new interface driver net1080
[ 3.188745] scsi 0:0:0:49456: Well-known LUN SAMSUNG KLUCG4J1ED-B0C1 0300 PQ: 0 ANSI: 6
[ 3.200705] usbcore: registered new interface driver cdc_subset
[ 3.206638] usbcore: registered new interface driver zaurus
[ 3.212230] usbcore: registered new interface driver cdc_ncm
[ 3.217965] VFIO - User Level meta-driver version: 0.3
[ 3.224865] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.228703] scsi 0:0:0:49476: Well-known LUN SAMSUNG KLUCG4J1ED-B0C1 0300 PQ: 0 ANSI: 6
[ 3.239837] ehci-pci: EHCI PCI platform driver
[ 3.240298] Error reading temperature for gpu thermal zone: -22
[ 3.250214] ehci-platform: EHCI generic platform driver
[ 3.255492] ehci-exynos: EHCI EXYNOS driver
[ 3.259716] ehci-msm: Qualcomm On-Chip EHCI Host Controller
[ 3.265322] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.271515] ohci-pci: OHCI PCI platform driver
[ 3.272653] scsi 0:0:0:0: Direct-Access SAMSUNG KLUCG4J1ED-B0C1 0300 PQ: 0 ANSI: 6
[ 3.284070] ohci-platform: OHCI generic platform driver
[ 3.289339] ohci-exynos: OHCI EXYNOS driver
[ 3.293736] usbcore: registered new interface driver usb-storage
[ 3.300152] [I/hisi_pd] pd_dpm_init
[ 3.303673] [I/hisi_pd] pd_dpm_probe : +++++++++
[ 3.308357] gpio_hub_power_on:regulator_enable
[ 3.313047] gpio_hub_change_typec_power: set typec vbus gpio to 0
[ 3.316560] sd 0:0:0:0: [sda] 1024 4096-byte logical blocks: (4.19 MB/4.00 MiB)
[ 3.316707] scsi 0:0:0:1: Direct-Access SAMSUNG KLUCG4J1ED-B0C1 0300 PQ: 0 ANSI: 6
[ 3.316894] sd 0:0:0:0: [sda] Write Protect is off
[ 3.316979] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ 3.318462] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.348306] Error reading temperature for gpu thermal zone: -22
[ 3.358368] gpio_hub_switch_to_hub: switch to hub
[ 3.363068] [I/hisi_pd] pd_dpm_probe ++++
[ 3.363068]
[ 3.368797] rt1711h_init (1.1.8_G): initializing...
[ 3.372573] sd 0:0:0:1: [sdb] 1024 4096-byte logical blocks: (4.19 MB/4.00 MiB)
[ 3.372792] scsi 0:0:0:2: Direct-Access SAMSUNG KLUCG4J1ED-B0C1 0300 PQ: 0 ANSI: 6
[ 3.372865] sd 0:0:0:1: [sdb] Write Protect is off
[ 3.372961] sd 0:0:0:1: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ 3.373304] random: fast init done
[ 3.374247] sd 0:0:0:1: [sdb] Attached SCSI disk
[ 3.410392] rt1711h node found...
[ 3.413779] rt1711_i2c_probe
[ 3.416656] I2C functionality : OK...
[ 3.421899] rt_parse_dt
[ 3.424348] rt1711h_chipID = 0x2171
[ 3.424568] sd 0:0:0:2: [sdc] 2048 4096-byte logical blocks: (8.39 MB/8.00 MiB)
[ 3.424787] scsi 0:0:0:3: Direct-Access SAMSUNG KLUCG4J1ED-B0C1 0300 PQ: 0 ANSI: 6
[ 3.424870] sd 0:0:0:2: [sdc] Write Protect is off
[ 3.424954] sd 0:0:0:2: [sdc] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ 3.426168] sd 0:0:0:2: [sdc] Attached SCSI disk
[ 3.456294] Error reading temperature for gpu thermal zone: -22
[ 3.467060] regmap_device_register: name = rt1711-4e
[ 3.468563] sd 0:0:0:3: [sdd] 15616000 4096-byte logical blocks: (64.0 GB/59.6 GiB)
[ 3.468842] sd 0:0:0:3: [sdd] Write Protect is off
[ 3.468926] sd 0:0:0:3: [sdd] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ 3.470898] GPT:Primary header thinks Alt. header is not at the end of the disk.
[ 3.470900] GPT:7805956 != 15615999
[ 3.470901] GPT:Alternate GPT header not at the end of the disk.
[ 3.470902] GPT:7805956 != 15615999
[ 3.470903] GPT: Use GNU Parted to correct GPT errors.
[ 3.470918] sdd: sdd1 sdd2 sdd3 sdd4 sdd5 sdd6 sdd7 sdd8 sdd9 sdd10 sdd11 sdd12 sdd13 sdd14 sdd15
[ 3.472052] sd 0:0:0:3: [sdd] Attached SCSI disk
[ 3.532044] rt_regmap_rt1711-4e: rt register cache data init
[ 3.537789] rt_regmap_rt1711-4e: cache cata init successfully
[ 3.543654] tcpc_device_register register tcpc device (type_c_port0)
[ 3.550048] [I/hisi_pd] tcpc_device_register register_pd_wake_unlock_notifier OK
[ 3.557441] PD Timer number = 37
[ 3.560719] tcpci_timer_init : init OK
[ 3.564299] Error reading temperature for gpu thermal zone: -22
[ 3.570402] pd_parse_pdata
[ 3.573120] pd_parse_pdata src pdo data =
[ 3.577125] pd_parse_pdata 0: 0x00019064
[ 3.581043] pd_parse_pdata snk pdo data =
[ 3.585046] pd_parse_pdata 0: 0x000190c8
[ 3.588963] pd_parse_pdata 1: 0x0002d0c8
[ 3.592883] pd_parse_pdata id vdos data =
[ 3.596886] pd_parse_pdata 0: 0xd00029cf
[ 3.600802] pd_parse_pdata 1: 0x00000000
[ 3.604717] pd_parse_pdata 2: 0x00010000
[ 3.608635] dpm_caps: local_dr_power
[ 3.612202] dpm_caps: local_dr_data
[ 3.615685] dpm_caps: local_ext_power
[ 3.619340] dpm_caps: local_usb_comm
[ 3.622908] dpm_caps: local_usb_suspend
[ 3.626736] dpm_caps: local_high_cap
[ 3.630304] dpm_caps: local_give_back
[ 3.633959] dpm_caps: local_no_suspend
[ 3.637701] dpm_caps: local_vconn_supply
[ 3.641617] dpm_caps: attemp_discover_cable_dfp
[ 3.646140] dpm_caps: attemp_enter_dp_mode
[ 3.650229] dpm_caps: attemp_discover_cable
[ 3.654404] dpm_caps: attemp_discover_id
[ 3.658320] dpm_caps: pr_reject_as_source
[ 3.662322] dpm_caps: pr_reject_as_sink
[ 3.666150] dpm_caps: pr_check_gp_source
[ 3.670065] dpm_caps: pr_check_gp_sink
[ 3.672309] Error reading temperature for gpu thermal zone: -22
[ 3.679721] dpm_caps: dr_reject_as_dfp
[ 3.683463] dpm_caps: dr_reject_as_ufp
[ 3.687204] dpm_caps: snk_prefer_low_voltage
[ 3.691467] dpm_caps: snk_ignore_mismatch_current
[ 3.696165] dpm_caps = 0xc010c10b
[ 3.699473] [I/hisi_pd] PE:pd_core_init
[ 3.703650] rt1711_init_alert name = type_c_port0
[ 3.708349] rt1711_init_alert gpio # = 293
[ 3.712454] GPIO requested...
[ 3.715415] rt1711_init_alert : IRQ number = 293
[ 3.720026] rt1711_init_alert : irq initialized...
[ 3.724834] IRQF_NO_THREAD Test
[ 3.728927] [I/hisi_pd] [TCPC-I]SkipAlert:0x0000
[ 3.733631] [I/hisi_pd] TPC-I:typec_init: DRP
[ 3.784294] Error reading temperature for gpu thermal zone: -22
[ 3.788906] [E/hisi_pd] typec_wait_ps_change: typec_wait_ps_change!!!+++++++++++
[ 3.788908] [E/hisi_pd] typec_wait_ps_change: typec_wait_ps_change!!!-----------
[ 3.788909] [E/hisi_pd] typec_unattached_power_entry:!!!+++++++++++
[ 3.789146] [E/hisi_pd] tcpci_disable_vbus_control: !!!++++++++
[ 3.789147] [E/hisi_pd] pd_dpm_handle_pe_event:!!!,event=0,+++
[ 3.789150] [E/hisi_pd] typec_unattached_power_entry:!!!-----------
[ 3.789151] [I/hisi_pd] TPC-I:** Unattached.SNK
[ 3.789457] tcpc_device_irq_enable : tcpc irq enable OK!
[ 3.789458] rt1711_i2c_probe probe OK!
[ 3.789638] mousedev: PS/2 mouse device common for all mice
[ 3.789726] usbcore: registered new interface driver xpad
[ 3.789744] usbcore: registered new interface driver usb_acecad
[ 3.789761] usbcore: registered new interface driver aiptek
[ 3.789779] usbcore: registered new interface driver gtco
[ 3.789798] usbcore: registered new interface driver hanwang
[ 3.789817] usbcore: registered new interface driver kbtab
[ 3.790468] i2c /dev entries driver
[ 3.790994] [ISP] isp_init: enter!
[ 3.791165] [ISP] isp_probe: enter!
[ 3.797616] [ISP] isp_getdts: clock rate 24000000, pool size 0x1000000
[ 3.797616] [ISP] isp_probe: exit!
[ 3.797695] [ISP] isp_init: exit!
[ 3.797759] usbcore: registered new interface driver uvcvideo
[ 3.797760] USB Video Class driver (1.1.1)
[ 3.798883] device-mapper: uevent: version 1.0.3
[ 3.799000] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
[ 3.799075] Bluetooth: HCI UART driver ver 2.3
[ 3.799077] Bluetooth: HCI UART protocol H4 registered
[ 3.799078] Bluetooth: HCI UART protocol LL registered
[ 3.799347] (stc): chnl_id list empty :4
[ 3.799351] (stk) : st_kim_start
[ 3.804479] [drm] disconnected : regmap_read val = 0x90
[ 3.804615] [drm] disconnected : regmap_read val = 0x90
[ 3.823813] sdhci: Secure Digital Host Controller Interface driver
[ 3.823814] sdhci: Copyright(c) Pierre Ossman
[ 3.823963] Synopsys Designware Multimedia Card Interface Driver
[ 3.824205] dwmmc_k3 ff37f000.dwmmc1: fifo-depth property not found, using value of FIFOTH register as default
[ 3.824754] [drm] disconnected : regmap_read val = 0x90
[ 3.826447] dwmmc_k3 ff37f000.dwmmc1: IDMAC supports 64-bit address mode.
[ 3.826520] dwmmc_k3 ff37f000.dwmmc1: Using internal DMA controller.
[ 3.826524] dwmmc_k3 ff37f000.dwmmc1: Version ID is 270a
[ 3.826543] dwmmc_k3 ff37f000.dwmmc1: DW MMC controller at irq 42,32 bit host data width,256 deep fifo
[ 3.826649] dwmmc_k3 ff37f000.dwmmc1: Got CD GPIO
[ 3.844892] [drm] disconnected : regmap_read val = 0x90
[ 3.845276] hisi_thermal fff30000.tsensor: THERMAL ALARM: 65600 > 65000
[ 3.847394] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[ 3.862334] hisi_thermal fff30000.tsensor: THERMAL ALARM stopped: 59552 < 65000
[ 3.864358] dwmmc_k3 ff37f000.dwmmc1: 1 slots initialized
[ 3.864441] dwmmc_k3 fc183000.dwmmc2: fifo-depth property not found, using value of FIFOTH register as default
[ 3.865406] [drm] disconnected : regmap_read val = 0x90
[ 3.866535] dwmmc_k3 fc183000.dwmmc2: IDMAC supports 64-bit address mode.
[ 3.866563] dwmmc_k3 fc183000.dwmmc2: Using internal DMA controller.
[ 3.866566] dwmmc_k3 fc183000.dwmmc2: Version ID is 270a
[ 3.866576] dwmmc_k3 fc183000.dwmmc2: DW MMC controller at irq 43,32 bit host data width,256 deep fifo
[ 3.885959] [drm] disconnected : regmap_read val = 0x90
[ 3.906693] (stk) :ldisc_install = 1
[ 3.906694] [drm] disconnected : regmap_read val = 0x90
[ 3.927425] [drm] disconnected : regmap_read val = 0x90
[ 3.948153] [drm] disconnected : regmap_read val = 0x90
[ 3.968489] [drm] disconnected : regmap_read val = 0x90
[ 3.970315] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[ 3.975475] mmc_host mmc0: Bus speed (slot 0) = 150000000Hz (slot req 200000000Hz, actual 150000000HZ div = 0)
[ 3.988312] dwmmc_k3 fc183000.dwmmc2: 1 slots initialized
[ 3.988428] sdhci-pltfm: SDHCI platform and OF driver helper
[ 3.988818] [drm] disconnected : regmap_read val = 0x90
[ 3.989928] ledtrig-cpu: registered to indicate activity on CPUs
[ 3.990210] hidraw: raw HID events driver (C) Jiri Kosina
[ 3.991197] usbcore: registered new interface driver usbhid
[ 3.991198] usbhid: USB HID core driver
[ 3.991271] ashmem: initialized
[ 3.991550] hisi_ddr_devfreq ddr_devfreq: init success
[ 3.991916] hifi_misc [E][3217315]:hifi_check_img_loaded:1472: hifi img is loaded fail: 0xffffffff.
[ 3.995582] dwmmc_k3 fc183000.dwmmc2: card claims to support voltages below defined range
[ 4.007177] mmc_host mmc1: Bus speed (slot 0) = 25000000Hz (slot req 25000000Hz, actual 25000000HZ div = 0)
[ 4.009510] mmc1: new SDIO card at address 0001
[ 4.028320] hifi pdev name[hifidsp].
[ 4.028378] DRV_IPCIntInit begin.
[ 4.028378] DRV_IPCIntInit line = 220
[ 4.028385] BSP_DRV_IPCIntInit end.
[ 4.028387] func = mailbox_init, line = 695 baseaddr = 0x8e712c00
[ 4.028422] i = 0, head_addr = 0xffff000009bb6cf0, data_addr = 0xffff000009bba0b0
[ 4.028423] i = 1, head_addr = 0xffff000009bb6c50, data_addr = 0xffff000009bb70b0
[ 4.028425] i = 2, head_addr = 0xffff000009bb6d18, data_addr = 0xffff000009bba0b0
[ 4.028425] i = 3, head_addr = 0xffff000009bb6c78, data_addr = 0xffff000009bb88b0
[ 4.028426] <<<<<<<<<<<<<<mailbox_create_box cpu_id = 0>>>>>>>>>>>>>>
[ 4.028428] ******************func = mailbox_init_all_handle line = 530 src_id = 1 dst_id = 4******************
[ 4.028429] ******************func = mailbox_init_all_handle line = 530 src_id = 0 dst_id = 4******************
[ 4.028431] ******************func = mailbox_init_all_handle line = 530 src_id = 4 dst_id = 1******************
[ 4.028432] ******************func = mailbox_init_all_handle line = 530 src_id = 4 dst_id = 0******************
[ 4.028503] mb init OK!
[ 4.028536] mb->local_id = 0 dst_id = 0
[ 4.028539] hifi_misc [I][3218515]:ap_ipc_int_init:914: Enter ap_ipc_int_init
[ 4.028540] hifi_misc [I][3218515]:ap_ipc_int_init:919: Exit ap_ipc_int_init
[ 4.028635] [cambricon_ipu_probe]:IPU FIFO_TaskElements init success, queue size: 4096
[ 4.028681] ff400000.cambricon-ipu supply vipu not found, using dummy regulator
[ 4.028921] of_get_iova_info:start_addr 0x40000, size 0x80000000 align 0x40000
[ 4.028995] IFO:<493:VENC_DRV_ModInit>enter VENC_DRV_ModInit()
[ 4.028995]
[ 4.029155] IFO:<429:VENC_DRV_Probe>omxvenc prepare to probe
[ 4.029155]
[ 4.029164] IFO:<368:VENC_DRV_SetupCdev>enter VENC_DRV_SetupCdev()
[ 4.029164]
[ 4.029229] IFO:<399:VENC_DRV_SetupCdev>exit VENC_DRV_SetupCdev()
[ 4.029229]
[ 4.029230] in hisi_ion_enable_iommu start
[ 4.029231] ion domain already init return domain
[ 4.029265] IFO:<131:Venc_GetDtsConfigInfo>venc_clk_rate: highRate:554000000, normalRate:450000000, lowRate:238000000
[ 4.029265]
[ 4.029267] ERR:<137:Venc_GetDtsConfigInfo>get venc qos mode failed set default
[ 4.029267]
[ 4.029269] IFO:<143:Venc_GetDtsConfigInfo>SmmuPageBaseAddr is 0xffff000008dfe310
[ 4.029269]
[ 4.029270] IFO:<458:VENC_DRV_Probe>omxvenc probe successfully
[ 4.029270]
[ 4.029287] IFO:<429:VENC_DRV_Probe>omxvenc prepare to probe
[ 4.029287]
[ 4.029288] IFO:<432:VENC_DRV_Probe>venc device detected already
[ 4.029288]
[ 4.029298] IFO:<506:VENC_DRV_ModInit>success
[ 4.029298]
[ 4.029298] IFO:<510:VENC_DRV_ModInit>exit VENC_DRV_ModInit()
[ 4.029298]
[ 4.029453] in hisi_ion_enable_iommu start
[ 4.029454] ion domain already init return domain
[ 4.029963] hisi_i2s e804f800.hisi_i2s: Registered as hisi_i2s
[ 4.030101] u32 classifier
[ 4.030101] Actions configured
[ 4.030109] Netfilter messages via NETLINK v0.30.
[ 4.030331] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
[ 4.030445] ctnetlink v0.93: registering with nfnetlink.
[ 4.030793] xt_time: kernel timezone is -0000
[ 4.034761] wl18xx_driver wl18xx.0.auto: Direct firmware load for ti-connectivity/wl18xx-conf.bin failed with error -2
[ 4.034764] wlcore: ERROR could not get configuration binary ti-connectivity/wl18xx-conf.bin: -2
[ 4.034765] wlcore: WARNING falling back to default config
[ 4.034801] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 4.034883] arp_tables: arp_tables: (C) 2002 David S. Miller
[ 4.035328] [drm:adv7511_detect.isra.2] *ERROR* Read connector status timout, time = 10
[ 4.035329] [drm] hdmi connector status = 2
[ 4.035408] [drm] +.
[ 4.035409] [drm] -.
[ 4.035476] [drm] dss_pri_clk:[300000000]->[300000000].
[ 4.035512] [drm] dss_mmbuf_clk:[238000000]->[237142858].
[ 4.035541] [drm] mode->clock(org) = 144000
[ 4.035542] [drm] HDMI real need clock = 144000000
[ 4.035544] [drm] postdiv1=0x1, POSTDIV2=0x1
[ 4.035582] [drm] dss_pxl0_clk [144000000]->[144000000]
[ 4.035638] [drm] isr_s1 = 0x10000!
[ 4.035640] [drm] isr_s2 = 0x11!
[ 4.040043] Initializing XFRM netlink socket
[ 4.040232] NET: Registered protocol family 10
[ 4.040612] mip6: Mobile IPv6
[ 4.040620] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 4.054077] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 4.054260] NET: Registered protocol family 17
[ 4.054269] NET: Registered protocol family 15
[ 4.054273] can: controller area network core (rev 20120528 abi 9)
[ 4.054288] NET: Registered protocol family 29
[ 4.054296] can: raw protocol (rev 20120528)
[ 4.054300] can: broadcast manager protocol (rev 20161123 t)
[ 4.054305] can: netlink gateway (rev 20130117) max_hops=1
[ 4.054376] Bluetooth: RFCOMM TTY layer initialized
[ 4.054379] Bluetooth: RFCOMM socket layer initialized
[ 4.054385] Bluetooth: RFCOMM ver 1.11
[ 4.054393] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 4.054395] Bluetooth: HIDP socket layer initialized
[ 4.054508] 9pnet: Installing 9P2000 support
[ 4.059334] Registered cp15_barrier emulation handler
[ 4.059341] Registered setend emulation handler
[ 4.059589] registered taskstats version 1
[ 4.066792] hisi_i2s e804f800.hisi_i2s: Failed to get DMA channel capabilities, falling back to period counting: -6
[ 4.066794] asoc-simple-card soc:sound: adv7511 <-> e804f800.hisi_i2s mapping ok
[ 4.067164] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 4.067172] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 1
[ 4.067360] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220ffe5 hci version 0x110 quirks 0x00010010
[ 4.067382] xhci-hcd xhci-hcd.1.auto: irq 354, io mem 0xff100000
[ 4.067460] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 4.067462] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.067464] usb usb1: Product: xHCI Host Controller
[ 4.067465] usb usb1: Manufacturer: Linux 4.9.78-147541-g16035b0edcf4 xhci-hcd
[ 4.067466] usb usb1: SerialNumber: xhci-hcd.1.auto
[ 4.067642] hub 1-0:1.0: USB hub found
[ 4.067654] hub 1-0:1.0: 1 port detected
[ 4.067730] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 4.067734] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 2
[ 4.067738] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.1 Enhanced SuperSpeed
[ 4.067763] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 4.067790] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 4.067792] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.067793] usb usb2: Product: xHCI Host Controller
[ 4.067794] usb usb2: Manufacturer: Linux 4.9.78-147541-g16035b0edcf4 xhci-hcd
[ 4.067796] usb usb2: SerialNumber: xhci-hcd.1.auto
[ 4.067912] hub 2-0:1.0: USB hub found
[ 4.067920] hub 2-0:1.0: 1 port detected
[ 4.068352] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[ 4.068459] hctosys: unable to open rtc device (rtc0)
[ 4.068465] [ISP] ov5640_main_module_init: enter!
[ 4.068512] [ISP] ov5640_main_probe: enter!
[ 4.115007] [drm] Expected : lane_clock = 864 M
[ 4.115177] [drm] burst_mode = 0x2 (DSI_NON_BURST_SYNC_PULSES => 0)
[ 4.115177] [drm] hsa_time=9, hbp_time=45, hline_time=1104
[ 4.115179] [drm] lane_byte_clk=108000000, pixel_clk=144000000
[ 4.273313] wlcore: wl18xx HW: 183x or 180x, PG 2.2 (ROM 0x11)
[ 4.276541] wlcore: loaded
[ 4.323304] [ISP] isp_i2c_read_clear_intrbits: ABRT_SOURCE 0x1000001
[ 4.323307] [ISP] isp_i2c_xfer: I2C abort
[ 4.323309] [ISP] isp_i2c_write_reg: write reg fail
[ 4.323310] [ISP] ov5640_main_power: could not set init registers
[ 4.323312] [ISP] isp_i2c_read_reg: read[0x300a]
[ 4.326327] [ISP] isp_i2c_read_clear_intrbits: ABRT_SOURCE 0x1000001
[ 4.326329] [ISP] isp_i2c_xfer: I2C abort
[ 4.326332] [ISP] isp_i2c_read_reg: read reg fail
[ 4.326333] [ISP] ov5640_main_get_chip_id: get chip id high[255] fail
[ 4.326351] [ISP] ov5640_main_probe: chip id is 0x0
[ 4.326352] [ISP] ov5640_main_probe: chip id is 0x0, probe failed
[ 4.326363] hisi-ov5640_main: probe of e8400000.isp:hisi,ov5640_main failed with error -1
[ 4.326414] [ISP] ov5640_main_module_init: exit!
[ 4.326421] [ISP] ov5640_sub_module_init: enter!
[ 4.326493] [ISP] ov5640_sub_probe: enter!
[ 4.392367] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd
[ 4.413481] usb 2-1: New USB device found, idVendor=0451, idProduct=8140
[ 4.413483] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.420268] hub 2-1:1.0: USB hub found
[ 4.420506] hub 2-1:1.0: 4 ports detected
[ 4.460400] dwmmc_k3 ff37f000.dwmmc1: tuning ok best_clksmpl 11 tuning_sample_flag bff7fff7
[ 4.460408] mmc0: new ultra high speed SDR104 SDHC card at address aaaa
[ 4.460646] mmcblk0: mmc0:aaaa SC16G 14.8 GiB
[ 4.536289] usb 1-1: new high-speed USB device number 2 using xhci-hcd
[ 4.579329] [ISP] isp_i2c_read_clear_intrbits: ABRT_SOURCE 0x1000001
[ 4.579331] [ISP] isp_i2c_xfer: I2C abort
[ 4.579332] [ISP] isp_i2c_write_reg: write reg fail
[ 4.579334] [ISP] ov5640_sub_power: could not set init registers
[ 4.579335] [ISP] isp_i2c_read_reg: read[0x300a]
[ 4.582349] [ISP] isp_i2c_read_clear_intrbits: ABRT_SOURCE 0x1000001
[ 4.582351] [ISP] isp_i2c_xfer: I2C abort
[ 4.582354] [ISP] isp_i2c_read_reg: read reg fail
[ 4.582354] [ISP] ov5640_sub_get_chip_id: get chip id high[255] fail
[ 4.582366] [ISP] ov5640_sub_probe: chip id is 0x0, probe failed
[ 4.582372] hisi-ov5640_sub: probe of e8400000.isp:hisi,ov5640_sub failed with error -1
[ 4.582410] [ISP] ov5640_sub_module_init: exit!
[ 4.582532] clk: Not disabling unused clocks
[ 4.582549] wlan-en-regulator: disabling
[ 4.582559] <[hisi_ip_to_atf_is_enabled]:regulator_id=0>
[ 4.582560] <[hisi_ip_to_atf_is_enabled]:regulator_id=1>
[ 4.582562] <[hisi_ip_to_atf_is_enabled]:regulator_id=8>
[ 4.582563] <[hisi_ip_to_atf_is_enabled]:regulator_id=2>
[ 4.582564] <[hisi_ip_to_atf_is_enabled]:regulator_id=3>
[ 4.582566] <[hisi_ip_to_atf_is_enabled]:regulator_id=4>
[ 4.582567] <[hisi_ip_to_atf_is_enabled]:regulator_id=5>
[ 4.582568] <[hisi_ip_to_atf_is_enabled]:regulator_id=6>
[ 4.582569] <[hisi_ip_to_atf_is_enabled]:regulator_id=7>
[ 4.582573] ALSA device list:
[ 4.582574] #0: hikey-hdmi
[ 4.678600] usb 1-1: New USB device found, idVendor=0451, idProduct=8142
[ 4.678601] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=1
[ 4.678603] usb 1-1: SerialNumber: D50A08491EA2
[ 4.708617] hub 1-1:1.0: USB hub found
[ 4.709042] hub 1-1:1.0: 4 ports detected
[ 4.720288] [drm] +.
[ 4.720293] [drm] dss_pwm_clk clk_enable successed, ret=0!
[ 4.924291] [drm] bl_level is 255
[ 4.924292] [drm] bl_level=255.
[ 4.924481] (stk) :ldisc installation timeout
(stk) :ldisc_install = 0[ 5.242018] uart-pl011 fff32000.serial: no DMA platform data
[ 5.248352] EXT4-fs (sdd12): couldn't mount as ext3 due to feature incompatibilities
[ 5.325176] EXT4-fs (sdd12): 1 orphan inode deleted
[ 5.330071] EXT4-fs (sdd12): recovery complete
[ 5.338397] EXT4-fs (sdd12): mounted filesystem with ordered data mode. Opts: (null)
[ 5.346194] VFS: Mounted root (ext4 filesystem) on device 8:60.
[ 5.352402] devtmpfs: mounted
[ 5.356400] Freeing unused kernel memory: 4096K
SELinux: Could not open policy file <= /etc/selinux/targeted/pol[ 5.420457] systemd[1]: System time before build time, advancing clock.
icy/policy.31: No such file or directory
[ 5.442788] cgroup: cgroup2: unknown option "nsdelegate"
[ 5.456411] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[ 5.477937] systemd[1]: Detected architecture arm64.
Welcome to Ubuntu 18.04 LTS!
[ 5.542592] systemd-sysv-ge: 21 output lines suppressed due to ratelimiting
[ OK ] Started Dispatch Password Requests to Console Directory Watch.
[ OK ] Created slice System Slice.
[ OK ] Listening on Journal Socket (/dev/log).
[ OK ] Listening on udev Control Socket.
[ OK ] Listening on Journal Audit Socket.
[ OK ] Created slice system-serial\x2dgetty.slice.
[ OK ] Listening on /dev/initctl Compatibility Named Pipe.
[ OK ] Listening on udev Kernel Socket.
[ OK ] Listening on Journal Socket.
Mounting POSIX Message Queue File System...
Starting Set the console keyboard layout...
Starting udev Coldplug all Devices...
Mounting Huge Pages File System...
Starting Remount Root and Kernel File Systems...
Starting Load Kernel Modules...
Starting Create Static Device Nodes in /dev...
[ OK ] Started Forward Password Requests to Wall Directory Watch.
[ OK ] Reached target Paths.
[ OK ] Reached target Local Encrypted Volumes.
[ OK ] Reached target Remote File Systems.
[ OK ] Reached target Swap.
Mounting Kernel Debug File System...
[ OK ] Listening on Syslog Socket.
Starting Journal Service...
[ OK ] Created slice User and Session Slice.
[ OK ] Reached target Slices.
[ 5.947448] systemd-journald[2492]: /dev/kmsg buffer overrun, some messages lost.
[ 5.948338] (stk) : timed out waiting for ldisc to be un-installed[ OK ] Mounted POSIX Message Queue File System.
[ OK ] Started Set the console keyboard layout.
[ OK ] Mounted Huge Pages File System.
[ OK ] Started Journal Service.
[ OK ] Started Remount Root and Kernel File Systems.
[ OK ] Started Load Kernel Modules.
[ 6.055355] (stk) :ldisc_install = 1[ OK ] Started Create Static Device Nodes in /dev.
[ OK ] Mounted Kernel Debug File System.
Starting Apply Kernel Variables...
Mounting Kernel Configuration File System...
Mounting FUSE Control File System...
Starting Load/Save Random Seed...
Starting udev Kernel Device Manager...
Starting Flush Journal to Persistent Storage...
[ OK ] Reached target Local File Systems (Pre).
[ OK ] Reached target Local File Systems.
Starting Set console font and keymap...
[ OK ] Started udev Kernel Device Manager.
[ OK ] Started udev Coldplug all Devices.
[ 6.243169] hisi_thermal fff30000.tsensor: THERMAL ALARM: 65816 > 65000
[ OK ] Started Apply Kernel Variables.
[ OK ] Mounted Kernel Configuration File System.
[ OK ] Mounted FUSE Control File System.
[ OK ] Started Load/Save Random Seed.
[ OK ] Started Set console font and keymap.
[ OK ] Created slice system-systemd\x2dbacklight.slice.
Starting Load/Save Screen Backlight…ess of backlight:e8601000.dsi.1...
[ OK ] Started Load/Save Screen Backlight …tness of backlight:e8601000.dsi.1.
[ OK ] Found device /dev/ttyAMA6.
[ OK ] Started Flush Journal to Persistent Storage.
[ OK ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
[ OK ] Reached target Bluetooth.
[ OK ] Reached target Sound Card.
[ 6.550563] hisi_thermal fff30000.tsensor: THERMAL ALARM stopped: 60632 < 65000
Starting Create Volatile Files and Directories...
Starting Load/Save RF Kill Switch Status...
[ OK ] Started Load/Save RF Kill Switch Status.
[ OK ] Started Create Volatile Files and Directories.
Starting Update UTMP about System Boot/Shutdown...
Starting Network Name Resolution...
Starting Network Time Synchronization...
[ OK ] Started Update UTMP about System Boot/Shutdown.
[ OK ] Started Network Time Synchronization.
[ OK ] Started Network Name Resolution.
[ OK ] Reached target Host and Network Name Lookups.
[ OK ] Reached target System Initialization.
[ OK ] Listening on D-Bus System Message Bus Socket.
[ OK ] Reached target Sockets.
[ OK ] Started Message of the Day.
[ OK ] Reached target Basic System.
[ OK ] Started Set the CPU Frequency Scaling governor.
Starting Login Service...
[ OK ] Started Regular background program processing daemon.
Starting Dispatcher daemon for systemd-networkd...
Starting System Logging Service...
[ OK ] Started Daily Cleanup of Temporary Directories.
[ OK ] Started D-Bus System Message Bus.
[ 7.068558] (stk) :ldisc installation timeout[ OK ] Started Login Service.
Starting Network Manager...
Starting WPA supplicant...
[ OK ] Reached target System Time Synchronized.
[ OK ] Started Daily apt download activities.
[ OK ] Started Daily apt upgrade and clean activities.
[ OK ] Started Discard unused blocks once a week.
[ OK ] Reached target Timers.
[ OK ] Started System Logging Service.
[ OK ] Started WPA supplicant.
Starting Hostname Service...
[ OK ] Started Dispatcher daemon for systemd-networkd.
[ OK ] Started Hostname Service.
[ OK ] Started Network Manager.
Starting Network Manager Script Dispatcher Service...
[ OK ] Reached target Network.
Starting /etc/rc.local Compatibility...
Starting OpenBSD Secure Shell server...
Starting Permit User Sessions...
[ OK ] Started /etc/rc.local Compatibility.
[ OK ] Started Permit User Sessions.
[ OK ] Started OpenBSD Secure Shell server.
[ OK ] Started Network Manager Script Dispatcher Service.
[ OK ] Created slice system-getty.slice.
[ OK ] Started Serial Getty on ttyAMA6.
[ OK ] Reached target Login Prompts.
[ OK ] Reached target Multi-User System.
[ OK ] Reached target Graphical Interface.
Starting Update UTMP about System Runlevel Changes...
[ OK ] Started Update UTMP about System Runlevel Changes.
[ 8.093098] (stk) : timed out waiting for ldisc to be un-installed
Ubuntu 18.04 LTS hikey970 ttyAMA6
hikey970 login: [ 9.212643] (stk) :ldisc installation timeout(stk) : timed out waiting for ldisc to be un-installed(stk) :ldisc installation timeout(stk) : timed out waiting for ldisc to be un-installed(stk) :ldisc installation timeout[ 14.524620] (stk) : timed out waiting for ldisc to be un-installed(stk) :ldisc installation timeout(stk) : timed out waiting for ldisc to be un-installed[ 16.675430] Bluetooth: st_register failed -22
Ubuntu 18.04 LTS hikey970 ttyAMA6
hikey970 login:
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment