Skip to content

Instantly share code, notes, and snippets.

@lucmann
Created January 8, 2026 21:29
Show Gist options
  • Select an option

  • Save lucmann/c0c073fe97d381cf34e5a3ecc3cf9341 to your computer and use it in GitHub Desktop.

Select an option

Save lucmann/c0c073fe97d381cf34e5a3ecc3cf9341 to your computer and use it in GitHub Desktop.
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[ 0.000000] Linux version 6.19.0-rc2-dirty (luc@vostro) (aarch64-linux-gnu-gcc (GCC) 15.1.0, GNU ld (GNU Binutils) 2.44) #4 SMP PREEMPT Tue Jan 6 22:18:57 CST 2026
[ 0.000000] KASLR disabled due to lack of seed
[ 0.000000] Machine model: HiKey970
[ 0.000000] earlycon: pl11 at MMIO 0x00000000fff32000 (options '115200')
[ 0.000000] printk: legacy bootconsole [pl11] enabled
[ 0.000000] efi: EFI v2.6 by EDK II
[ 0.000000] efi: MEMATTR=0xbe6b3698 MEMRESERVE=0xb6295c18
[ 0.000000] OF: reserved mem: Reserved memory: No reserved-memory node in the DT
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000000000-0x00000000ffffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal [mem 0x0000000100000000-0x00000001bfffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x00000000167fffff]
[ 0.000000] node 0: [mem 0x0000000016988000-0x00000000209fffff]
[ 0.000000] node 0: [mem 0x0000000020b00000-0x00000000320fffff]
[ 0.000000] node 0: [mem 0x0000000032101000-0x000000008e0fffff]
[ 0.000000] node 0: [mem 0x000000008e240000-0x00000000ba438fff]
[ 0.000000] node 0: [mem 0x00000000ba439000-0x00000000ba43cfff]
[ 0.000000] node 0: [mem 0x00000000ba43d000-0x00000000ba44ffff]
[ 0.000000] node 0: [mem 0x00000000ba450000-0x00000000ba68ffff]
[ 0.000000] node 0: [mem 0x00000000ba690000-0x00000000bf65ffff]
[ 0.000000] node 0: [mem 0x00000000bf660000-0x00000000bf69ffff]
[ 0.000000] node 0: [mem 0x00000000bf6a0000-0x00000000bf6affff]
[ 0.000000] node 0: [mem 0x00000000bf6b0000-0x00000000bf6fffff]
[ 0.000000] node 0: [mem 0x00000000bf700000-0x00000000bfffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x00000001bfffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000001bfffffff]
[ 0.000000] On node 0, zone DMA: 392 pages in unavailable ranges
[ 0.000000] On node 0, zone DMA: 256 pages in unavailable ranges
[ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.000000] On node 0, zone DMA: 320 pages in unavailable ranges
[ 0.000000] cma: Reserved 64 MiB at 0x00000000b6400000
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.1 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.0
[ 0.000000] percpu: Embedded 23 pages/cpu s56088 r8192 d29928 u94208
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: detected: ARM erratum 845719
[ 0.000000] alternatives: applying boot alternatives
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/Image-hikey970-v6.19.0-rc2.gz earlycon=pl011,0xfff32000,115200 clk_ignore_unused=true console=tty0 console=ttyAMA6,115200n8 root=/dev/sdd12 rootwait rw debug loglevel=7 initcall_debug efi=noruntime random.trust_cpu=on random.hwrng=1
[ 0.000000] printk: log_buf_len individual max cpu contribution: 4096 bytes
[ 0.000000] printk: log_buf_len total cpu_extra contributions: 28672 bytes
[ 0.000000] printk: log_buf_len min size: 16384 bytes
[ 0.000000] printk: log buffer data + meta data: 65536 + 229376 = 294912 bytes
[ 0.000000] printk: early log buf free: 13176(80%)
[ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.000000] software IO TLB: area num 8.
[ 0.000000] software IO TLB: mapped [mem 0x00000000ba6b3000-0x00000000be6b3000] (64MB)
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1571895
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] Root IRQ handler: gic_handle_irq
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] arch_timer: cp15 timer running at 1.92MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x1c570327e, max_idle_ns: 1763180809505 ns
[ 0.000001] sched_clock: 56 bits at 1920kHz, resolution 520ns, wraps every 4398046510977ns
[ 0.008912] Calibrating delay loop (skipped), value calculated using timer frequency.. 3.84 BogoMIPS (lpj=7680)
[ 0.019117] pid_max: default: 32768 minimum: 301
[ 0.023908] SELinux: Initializing.
[ 0.027797] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.035463] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.044511] cacheinfo: Unable to detect cache hierarchy for CPU 0
[ 0.051511] rcu: Hierarchical SRCU implementation.
[ 0.056352] rcu: Max phase no-delay instances is 1000.
[ 0.061849] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
[ 0.070930] EFI runtime services will be disabled.
[ 0.076060] smp: Bringing up secondary CPUs ...
[ 0.081143] Detected VIPT I-cache on CPU1
[ 0.081210] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[ 0.081762] Detected VIPT I-cache on CPU2
[ 0.081795] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[ 0.082288] Detected VIPT I-cache on CPU3
[ 0.082320] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[ 0.083316] CPU features: detected: Spectre-v2
[ 0.083324] CPU features: detected: Spectre-v4
[ 0.083327] CPU features: detected: Spectre-BHB
[ 0.083330] CPU features: detected: ARM erratum 858921
[ 0.083335] Detected VIPT I-cache on CPU4
[ 0.083365] arch_timer: Enabling local workaround for ARM erratum 858921
[ 0.083374] arch_timer: CPU4: Trapping CNTVCT access
[ 0.083381] CPU4: Booted secondary processor 0x0000000100 [0x410fd092]
[ 0.083881] Detected VIPT I-cache on CPU5
[ 0.083901] arch_timer: Enabling local workaround for ARM erratum 858921
[ 0.083906] arch_timer: CPU5: Trapping CNTVCT access
[ 0.083910] CPU5: Booted secondary processor 0x0000000101 [0x410fd092]
[ 0.084391] Detected VIPT I-cache on CPU6
[ 0.084410] arch_timer: Enabling local workaround for ARM erratum 858921
[ 0.084416] arch_timer: CPU6: Trapping CNTVCT access
[ 0.084420] CPU6: Booted secondary processor 0x0000000102 [0x410fd092]
[ 0.084937] Detected VIPT I-cache on CPU7
[ 0.084957] arch_timer: Enabling local workaround for ARM erratum 858921
[ 0.084961] arch_timer: CPU7: Trapping CNTVCT access
[ 0.084966] CPU7: Booted secondary processor 0x0000000103 [0x410fd092]
[ 0.085017] smp: Brought up 1 node, 8 CPUs
[ 0.229458] SMP: Total of 8 processors activated.
[ 0.234216] CPU: All CPU(s) started at EL2
[ 0.238391] CPU features: detected: 32-bit EL0 Support
[ 0.243583] CPU features: detected: 32-bit EL1 Support
[ 0.248785] CPU features: detected: CRC32 instructions
[ 0.253983] CPU features: detected: PMUv3
[ 0.258072] alternatives: applying system-wide alternatives
[ 0.264962] CPU features: emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching
[ 0.273708] Memory: 5991228K/6287580K available (17728K kernel code, 2202K rwdata, 9756K rodata, 3072K init, 361K bss, 226768K reserved, 65536K cma-reserved)
[ 0.290289] devtmpfs: initialized
[ 0.298595] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.308497] posixtimers hash table entries: 4096 (order: 4, 65536 bytes, linear)
[ 0.316100] futex hash table entries: 2048 (131072 bytes on 1 NUMA nodes, total 128 KiB, linear).
[ 0.326112] 24432 pages in range for non-PLT usage
[ 0.326117] 515952 pages in range for PLT usage
[ 0.337424] DMI not present or invalid.
[ 0.343182] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.350174] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[ 0.357573] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.365778] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.373913] audit: initializing netlink subsys (disabled)
[ 0.379535] audit: type=2000 audit(0.248:1): state=initialized audit_enabled=0 res=1
[ 0.389092] thermal_sys: Registered thermal governor 'fair_share'
[ 0.395297] cpuidle: using governor ladder
[ 0.399465] cpuidle: using governor menu
[ 0.403730] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.410739] ASID allocator initialised with 65536 entries
[ 0.417632] Serial: AMBA PL011 UART driver
[ 0.435474] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.442340] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page
[ 0.448677] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages
[ 0.455545] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page
[ 0.461879] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.468738] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.475071] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages
[ 0.481932] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page
[ 0.489860] ACPI: Interpreter disabled.
[ 0.494438] iommu: Default domain type: Translated
[ 0.499285] iommu: DMA domain TLB invalidation policy: strict mode
[ 0.506084] SCSI subsystem initialized
[ 0.510332] usbcore: registered new interface driver usbfs
[ 0.515908] usbcore: registered new interface driver hub
[ 0.521303] usbcore: registered new device driver usb
[ 0.526652] mc: Linux media interface: v0.10
[ 0.531032] videodev: Linux video capture interface: v2.00
[ 0.536687] pps_core: LinuxPPS API ver. 1 registered
[ 0.541704] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.550964] PTP clock support registered
[ 0.555647] Advanced Linux Sound Architecture Driver Initialized.
[ 0.562680] Bluetooth: Core ver 2.22
[ 0.566315] NET: Registered PF_BLUETOOTH protocol family
[ 0.571683] Bluetooth: HCI device and connection manager initialized
[ 0.578112] Bluetooth: HCI socket layer initialized
[ 0.583045] Bluetooth: L2CAP socket layer initialized
[ 0.588172] Bluetooth: SCO socket layer initialized
[ 0.593496] vgaarb: loaded
[ 0.596626] clocksource: Switched to clocksource arch_sys_counter
[ 0.603265] VFS: Disk quotas dquot_6.6.0
[ 0.607245] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.614827] pnp: PnP ACPI: disabled
[ 0.619153] NET: Registered PF_INET protocol family
[ 0.624306] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.635840] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[ 0.644543] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.652389] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.660698] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[ 0.669597] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.676343] UDP hash table entries: 4096 (order: 6, 262144 bytes, linear)
[ 0.683387] UDP-Lite hash table entries: 4096 (order: 6, 262144 bytes, linear)
[ 0.691083] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.697880] PCI: CLS 0 bytes, default 64
[ 0.705920] kvm [1]: nv: 568 coarse grained trap handlers
[ 0.711804] kvm [1]: IPA Size Limit: 40 bits
[ 0.717891] kvm [1]: vgic interrupt IRQ9
[ 0.721892] kvm [1]: Hyp nVHE mode initialized successfully
[ 0.729374] Initialise system trusted keyrings
[ 0.734067] workingset: timestamp_bits=46 max_order=21 bucket_order=0
[ 0.741115] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.747117] fuse: init (API version 7.45)
[ 0.751288] 9p: Installing v9fs 9p2000 file system support
[ 0.757784] cryptd: max_cpu_qlen set to 1000
[ 0.802952] Key type asymmetric registered
[ 0.807109] Asymmetric key parser 'x509' registered
[ 0.812128] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[ 0.819623] io scheduler mq-deadline registered
[ 0.824218] io scheduler kyber registered
[ 0.828316] io scheduler bfq registered
[ 0.835393] pinctrl-single e896c000.pinmux: 459 pins, size 1836
[ 0.842282] pinctrl-single fff11000.pinmux: 463 pins, size 1852
[ 0.848851] pinctrl-single e896c800.pinmux: 459 pins, size 1836
[ 0.855128] pinctrl-single fc182000.pinmux: 10 pins, size 40
[ 0.861012] pinctrl-single fc182800.pinmux: 10 pins, size 40
[ 0.866898] pinctrl-single ff37e000.pinmux: 12 pins, size 48
[ 0.872785] pinctrl-single ff37e800.pinmux: 12 pins, size 48
[ 0.879129] pinctrl-single fff11800.pinmux: 463 pins, size 1852
[ 0.887970] pl061_gpio e8a0b000.gpio: PL061 GPIO chip registered
[ 0.894377] pl061_gpio e8a0c000.gpio: PL061 GPIO chip registered
[ 0.900766] pl061_gpio e8a0d000.gpio: PL061 GPIO chip registered
[ 0.907142] pl061_gpio e8a0e000.gpio: PL061 GPIO chip registered
[ 0.913518] pl061_gpio e8a0f000.gpio: PL061 GPIO chip registered
[ 0.919897] pl061_gpio e8a10000.gpio: PL061 GPIO chip registered
[ 0.926387] pl061_gpio e8a11000.gpio: PL061 GPIO chip registered
[ 0.932833] pl061_gpio e8a12000.gpio: PL061 GPIO chip registered
[ 0.939210] pl061_gpio e8a13000.gpio: PL061 GPIO chip registered
[ 0.945637] pl061_gpio e8a14000.gpio: PL061 GPIO chip registered
[ 0.952027] pl061_gpio e8a15000.gpio: PL061 GPIO chip registered
[ 0.958420] pl061_gpio e8a16000.gpio: PL061 GPIO chip registered
[ 0.964815] pl061_gpio e8a17000.gpio: PL061 GPIO chip registered
[ 0.971196] pl061_gpio e8a18000.gpio: PL061 GPIO chip registered
[ 0.977580] pl061_gpio e8a19000.gpio: PL061 GPIO chip registered
[ 0.983973] pl061_gpio e8a1a000.gpio: PL061 GPIO chip registered
[ 0.990377] pl061_gpio e8a1b000.gpio: PL061 GPIO chip registered
[ 0.996779] pl061_gpio e8a1c000.gpio: PL061 GPIO chip registered
[ 1.003181] pl061_gpio fff28000.gpio: PL061 GPIO chip registered
[ 1.009566] pl061_gpio fff29000.gpio: PL061 GPIO chip registered
[ 1.015955] pl061_gpio e8a1f000.gpio: PL061 GPIO chip registered
[ 1.022345] pl061_gpio e8a20000.gpio: PL061 GPIO chip registered
[ 1.028868] pl061_gpio fff0b000.gpio: PL061 GPIO chip registered
[ 1.035273] pl061_gpio fff0c000.gpio: PL061 GPIO chip registered
[ 1.041679] pl061_gpio fff0d000.gpio: PL061 GPIO chip registered
[ 1.048069] pl061_gpio fff0e000.gpio: PL061 GPIO chip registered
[ 1.054460] pl061_gpio fff0f000.gpio: PL061 GPIO chip registered
[ 1.060859] pl061_gpio fff10000.gpio: PL061 GPIO chip registered
[ 1.067244] pl061_gpio fff1d000.gpio: PL061 GPIO chip registered
[ 1.074093] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.095827] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.104447] msm_serial: driver initialized
[ 1.108722] SuperH (H)SCI(F) driver initialized
[ 1.121097] brd: module loaded
[ 1.128919] loop: module loaded
[ 1.135115] tun: Universal TUN/TAP device driver, 1.6
[ 1.140464] CAN device driver interface
[ 1.144922] e1000e: Intel(R) PRO/1000 Network Driver
[ 1.149983] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 1.156023] igb: Intel(R) Gigabit Ethernet Network Driver
[ 1.161489] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 1.167174] igbvf: Intel(R) Gigabit Virtual Function Network Driver
[ 1.173510] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[ 1.179549] sky2: driver version 1.30
[ 1.183510] PPP generic driver version 2.4.2
[ 1.187992] PPP BSD Compression module registered
[ 1.192780] PPP Deflate Compression module registered
[ 1.197902] PPP MPPE Compression module registered
[ 1.202920] usbcore: registered new interface driver asix
[ 1.208430] usbcore: registered new interface driver ax88179_178a
[ 1.214638] usbcore: registered new interface driver cdc_ether
[ 1.220584] usbcore: registered new interface driver net1080
[ 1.226360] usbcore: registered new interface driver cdc_subset
[ 1.232395] usbcore: registered new interface driver zaurus
[ 1.238097] usbcore: registered new interface driver cdc_ncm
[ 1.244040] VFIO - User Level meta-driver version: 0.3
[ 1.251295] usbcore: registered new interface driver usb-storage
[ 1.258495] mousedev: PS/2 mouse device common for all mice
[ 1.264296] usbcore: registered new interface driver xpad
[ 1.269813] usbcore: registered new interface driver usb_acecad
[ 1.275850] usbcore: registered new interface driver aiptek
[ 1.281542] usbcore: registered new interface driver hanwang
[ 1.287316] usbcore: registered new interface driver kbtab
[ 1.293789] i2c_dev: i2c /dev entries driver
[ 1.298793] usbcore: registered new interface driver uvcvideo
[ 1.305672] device-mapper: uevent: version 1.0.3
[ 1.310469] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: dm-devel@lists.linux.dev
[ 1.319586] Bluetooth: HCI UART driver ver 2.3
[ 1.324083] Bluetooth: HCI UART protocol H4 registered
[ 1.329694] sdhci: Secure Digital Host Controller Interface driver
[ 1.335943] sdhci: Copyright(c) Pierre Ossman
[ 1.340553] Synopsys Designware Multimedia Card Interface Driver
[ 1.346977] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.353329] ufshcd-hisi ff3c0000.ufs: ufshcd_populate_vreg: Unable to find vdd-hba-supply regulator, assuming enabled
[ 1.364061] ufshcd-hisi ff3c0000.ufs: ufshcd_populate_vreg: Unable to find vcc-supply regulator, assuming enabled
[ 1.374439] ufshcd-hisi ff3c0000.ufs: ufshcd_populate_vreg: Unable to find vccq-supply regulator, assuming enabled
[ 1.384909] ufshcd-hisi ff3c0000.ufs: ufshcd_populate_vreg: Unable to find vccq2-supply regulator, assuming enabled
[ 1.395489] ufshcd-hisi ff3c0000.ufs: invalid ref_clk setting = 3200000
[ 1.426270] scsi host0: ufshcd
[ 1.552160] scsi 0:0:0:49488: Well-known LUN SAMSUNG KLUCG4J1ED-B0C1 0300 PQ: 0 ANSI: 6
[ 1.560950] hid: raw HID events driver (C) Jiri Kosina
[ 1.566654] scsi 0:0:0:49476: Well-known LUN SAMSUNG KLUCG4J1ED-B0C1 0300 PQ: 0 ANSI: 6
[ 1.576665] scsi 0:0:0:49456: Well-known LUN SAMSUNG KLUCG4J1ED-B0C1 0300 PQ: 0 ANSI: 6
[ 1.586668] scsi 0:0:0:0: Direct-Access SAMSUNG KLUCG4J1ED-B0C1 0300 PQ: 0 ANSI: 6
[ 1.595281] usbcore: registered new interface driver usbhid
[ 1.600917] usbhid: USB HID core driver
[ 1.601229] sd 0:0:0:0: [sda] 1024 4096-byte logical blocks: (4.19 MB/4.00 MiB)
[ 1.604996] scsi 0:0:0:1: Direct-Access SAMSUNG KLUCG4J1ED-B0C1 0300 PQ: 0 ANSI: 6
[ 1.606345] sd 0:0:0:1: [sdb] 1024 4096-byte logical blocks: (4.19 MB/4.00 MiB)
[ 1.606404] sd 0:0:0:1: [sdb] Write Protect is off
[ 1.606509] sd 0:0:0:1: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ 1.606556] sd 0:0:0:1: [sdb] Preferred minimum I/O size 8192 bytes
[ 1.606559] sd 0:0:0:1: [sdb] Optimal transfer size 8192 bytes
[ 1.612239] sd 0:0:0:0: [sda] Write Protect is off
[ 1.620540] scsi 0:0:0:2: Direct-Access SAMSUNG KLUCG4J1ED-B0C1 0300 PQ: 0 ANSI: 6
[ 1.621687] sd 0:0:0:2: [sdc] 2048 4096-byte logical blocks: (8.39 MB/8.00 MiB)
[ 1.621742] sd 0:0:0:2: [sdc] Write Protect is off
[ 1.621840] sd 0:0:0:2: [sdc] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ 1.621883] sd 0:0:0:2: [sdc] Preferred minimum I/O size 8192 bytes
[ 1.621886] sd 0:0:0:2: [sdc] Optimal transfer size 8192 bytes
[ 1.641297] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ 1.647689] scsi 0:0:0:3: Direct-Access SAMSUNG KLUCG4J1ED-B0C1 0300 PQ: 0 ANSI: 6
[ 1.649038] sd 0:0:0:3: [sdd] 15616000 4096-byte logical blocks: (64.0 GB/59.6 GiB)
[ 1.649092] sd 0:0:0:3: [sdd] Write Protect is off
[ 1.649192] sd 0:0:0:3: [sdd] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ 1.649235] sd 0:0:0:3: [sdd] Preferred minimum I/O size 8192 bytes
[ 1.649239] sd 0:0:0:3: [sdd] Optimal transfer size 8192 bytes
[ 1.653476] sd 0:0:0:0: [sda] Preferred minimum I/O size 8192 bytes
[ 1.666457] sd 0:0:0:0: [sda] Optimal transfer size 8192 bytes
[ 1.676959] sd 0:0:0:1: [sdb] Attached SCSI disk
[ 1.767917] u32 classifier
[ 1.770692] input device check on
[ 1.772893] sd 0:0:0:2: [sdc] Attached SCSI disk
[ 1.774387] Actions configured
[ 1.783981] xt_time: kernel timezone is -0000
[ 1.784230] GPT:Primary header thinks Alt. header is not at the end of the disk.
[ 1.784931] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.795876] GPT:7805956 != 15615999
[ 1.804051] GPT:Alternate GPT header not at the end of the disk.
[ 1.810115] GPT:7805956 != 15615999
[ 1.813632] GPT: Use GNU Parted to correct GPT errors.
[ 1.818833] sdd: sdd1 sdd2 sdd3 sdd4 sdd5 sdd6 sdd7 sdd8 sdd9 sdd10 sdd11 sdd12 sdd13 sdd14 sdd15
[ 1.819800] sd 0:0:0:3: [sdd] Attached SCSI disk
[ 1.832598] Initializing XFRM netlink socket
[ 1.836950] NET: Registered PF_INET6 protocol family
[ 1.842377] Segment Routing with IPv6
[ 1.846091] In-situ OAM (IOAM) with IPv6
[ 1.850137] mip6: Mobile IPv6
[ 1.853163] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 1.859387] NET: Registered PF_PACKET protocol family
[ 1.864497] PFKEY is deprecated and scheduled to be removed in 2027, please contact the netdev mailing list
[ 1.874343] NET: Registered PF_KEY protocol family
[ 1.879187] can: controller area network core
[ 1.883596] NET: Registered PF_CAN protocol family
[ 1.888442] can: raw protocol
[ 1.891444] can: broadcast manager protocol
[ 1.895677] can: netlink gateway - max_hops=1
[ 1.900135] Bluetooth: RFCOMM TTY layer initialized
[ 1.905066] Bluetooth: RFCOMM socket layer initialized
[ 1.910261] Bluetooth: RFCOMM ver 1.11
[ 1.914055] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 1.920034] Bluetooth: HIDP socket layer initialized
[ 1.925191] 9pnet: Installing 9P2000 support
[ 1.935881] registered taskstats version 1
[ 1.940042] Loading compiled-in X.509 certificates
[ 1.956047] fdf02000.serial: ttyAMA0 at MMIO 0xfdf02000 (irq = 44, base_baud = 0) is a PL011 rev2
[ 1.965393] fdf03000.serial: ttyAMA2 at MMIO 0xfdf03000 (irq = 45, base_baud = 0) is a PL011 rev2
[ 1.974827] fff32000.serial: ttyAMA6 at MMIO 0xfff32000 (irq = 46, base_baud = 0) is a PL011 rev2
[ 1.983872] printk: console [ttyAMA6] enabled
[ 1.983872] printk: console [ttyAMA6] enabled
[ 1.992647] printk: legacy bootconsole [pl11] disabled
[ 1.992647] printk: legacy bootconsole [pl11] disabled
[ 2.006734] dwmmc_k3 fc183000.dwmmc2: fifo-depth property not found, using value of FIFOTH register as default
[ 2.006879] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 2.007507] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 2.007882] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
[ 2.007928] faux_driver regulatory: Direct firmware load for regulatory.db failed with error -2
[ 2.007933] cfg80211: failed to load regulatory.db
[ 2.008057] clk: Not disabling unused clocks
[ 2.008070] PM: genpd: Disabling unused power domains
[ 2.008105] ALSA device list:
[ 2.008107] No soundcards found.
[ 2.008638] dwmmc_k3 fc183000.dwmmc2: IDMAC supports 64-bit address mode.
[ 2.008654] dwmmc_k3 fc183000.dwmmc2: Using internal DMA controller.
[ 2.008660] dwmmc_k3 fc183000.dwmmc2: Version ID is 270a
[ 2.008688] dwmmc_k3 fc183000.dwmmc2: DW MMC controller at irq 47,32 bit host data width,256 deep fifo
[ 2.008821] mmc_host mmc0: card is non-removable.
[ 2.024534] check access for rdinit=/init failed: -2, ignoring
[ 2.094661] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[ 2.117298] EXT4-fs (sdd12): mounted filesystem 3bfa884f-a875-4066-a681-9eb30b224c3b r/w without journal. Quota mode: none.
[ 2.117355] VFS: Mounted root (ext4 filesystem) on device 8:60.
[ 2.134476] dwmmc_k3 fc183000.dwmmc2: card claims to support voltages below defined range
[ 2.134572] devtmpfs: mounted
[ 2.135465] Freeing unused kernel memory: 3072K
[ 2.135546] Run /sbin/init as init process
[ 2.164633] mmc_host mmc0: Bus speed (slot 0) = 25000000Hz (slot req 25000000Hz, actual 25000000HZ div = 0)
[ 2.166465] mmc0: new SDIO card at address 0001
SELinux: Could not open policy file <= /etc/selinux/targeted/pol[ 2.233937] systemd[1]: System time before build time, advancing clock.
icy/policy.35: No such file or directory
[ 2.250815] systemd[1]: Failed to find module 'autofs4'
[ 2.283189] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[ 2.292757] systemd[1]: systemd 252.39-1~deb12u1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
[ 2.292788] systemd[1]: Detected architecture arm64.
[ 2.314005] mmc_host mmc0: Bus speed (slot 0) = 25000000Hz (slot req 25000000Hz, actual 25000000HZ div = 0)
Welcome to Debian GNU/Linux 12 (bookworm)!
[ 2.352906] systemd[1]: Hostname set to <hikey970>.
[ 2.403193] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[ 2.434255] mmc_host mmc0: Bus speed (slot 0) = 25000000Hz (slot req 25000000Hz, actual 25000000HZ div = 0)
[ 2.637116] wlcore: wl18xx HW: 183x or 180x, PG 2.2 (ROM 0x11)
[ 2.637958] wlcore: WARNING Detected unconfigured mac address in nvs, derive from fuse instead.
[ 2.637961] wlcore: WARNING This default nvs file can be removed from the file system
[ 2.638848] wlcore: loaded
[ OK ] Created slice system-getty.slice - Slice /system/getty.
[ OK ] Created slice system-modpr…lice - Slice /system/modprobe.
[ OK ] Created slice system-seria… - Slice /system/serial-getty.
[ OK ] Created slice system-wpa_s…0m - Slice /system/wpa_supplicant.
[ OK ] Created slice user.slice - User and Session Slice.
[ OK ] Started systemd-ask-passwo…quests to Console Directory Watch.
[ OK ] Started systemd-ask-passwo… Requests to Wall Directory Watch.
Expecting device dev-ttyAMA6.device - /dev/ttyAMA6...
Expecting device sys-subsy…sys/subsystem/net/devices/wlan0...
[ OK ] Reached target cryptsetup.…get - Local Encrypted Volumes.
[ OK ] Reached target integrityse…Local Integrity Protected Volumes.
[ OK ] Reached target paths.target - Path Units.
[ OK ] Reached target remote-fs.target - Remote File Systems.
[ OK ] Reached target slices.target - Slice Units.
[ OK ] Reached target swap.target - Swaps.
[ OK ] Reached target veritysetup… - Local Verity Protected Volumes.
[ OK ] Listening on systemd-initc… initctl Compatibility Named Pipe.
[ OK ] Listening on systemd-journ…socket - Journal Audit Socket.
[ OK ] Listening on systemd-journ…t - Journal Socket (/dev/log).
[ OK ] Listening on systemd-journald.socket - Journal Socket.
[ OK ] Listening on systemd-udevd….socket - udev Control Socket.
[ OK ] Listening on systemd-udevd…l.socket - udev Kernel Socket.
Mounting dev-hugepages.mount - Huge Pages File System...
Mounting dev-mqueue.mountPOSIX Message Queue File System...
Mounting sys-kernel-debug.… - Kernel Debug File System...
Starting modprobe@configfs…m - Load Kernel Module configfs...
Starting modprobe@dm_mod.s…[0m - Load Kernel Module dm_mod...
Starting modprobe@drm.service - Load Kernel Module drm...
Starting modprobe@efi_psto…- Load Kernel Module efi_pstore...
Starting modprobe@fuse.ser…e - Load Kernel Module fuse...
Starting modprobe@loop.ser…e - Load Kernel Module loop...
Starting systemd-journald.service - Journal Service...
Starting systemd-modules-l…rvice - Load Kernel Modules...
Starting systemd-remount-f…nt Root and Kernel[ 3.082890] systemd-journald[1644]: /dev/kmsg buffer overrun, some messages lost.
File Systems...
Starting systemd-udev-trig…[0m - Coldplug All udev Devices...
[ OK ] Started systemd-journald.service - Journal Service.
[ OK ] Mounted dev-hugepages.mount - Huge Pages File System.
[ OK ] Mounted dev-mqueue.mount- POSIX Message Queue File System.
[ OK ] Mounted sys-kernel-debug.m…nt - Kernel Debug File System.
[ OK ] Finished modprobe@configfs…[0m - Load Kernel Module configfs.
[ OK ] Finished modprobe@dm_mod.s…e - Load Kernel Module dm_mod.
[ OK ] Finished modprobe@drm.service - Load Kernel Module drm.
[ OK ] Finished modprobe@efi_psto…m - Load Kernel Module efi_pstore.
[ OK ] Finished modprobe@fuse.service - Load Kernel Module fuse.
[ OK ] Finished modprobe@loop.service - Load Kernel Module loop.
[ OK ] Finished systemd-modules-l…service - Load Kernel Modules.
[ OK ] Finished systemd-remount-f…ount Root and Kernel File Systems.
Mounting sys-fs-fuse-conne… - FUSE Control File System...
Mounting sys-kernel-config…ernel Configuration File System...
Starting systemd-journal-f…h Journal to Persistent Storage...
[ 3.339586] systemd-journald[1644]: Received client request to flush runtime journal.
Starting systemd-random-se…ice - Load/Save Random Seed...
Starting systemd-sysctl.se…ce - Apply Kernel Variables...
Starting systemd-sysusers.…rvice - Create System Users...
[ OK ] Mounted sys-fs-fuse-connec…nt - FUSE Control File System.
[ OK ] Mounted sys-kernel-config.… Kernel Configuration File System.
[ OK ] Finished systemd-journal-f…ush Journal to Persistent Storage.
[ OK ] Finished systemd-sysctl.service - Apply Kernel Variables.
[ OK ] Finished systemd-sysusers.service - Create System Users.
Starting systemd-tmpfiles-…ate Static Device Nodes in /dev...
[ OK ] Finished systemd-udev-trig…e - Coldplug All udev Devices.
[ OK ] Finished systemd-tmpfiles-…reate Static Device Nodes in /dev.
[ OK ] Reached target local-fs-pr…reparation for Local File Systems.
[ OK ] Reached target local-fs.target - Local File Systems.
Starting ifupdown-pre.serv…ynchronize boot up for ifupdown...
Starting systemd-tmpfiles-…te System Files and Directories...
Starting systemd-udevd.ser…ger for Device Events and Files...
[ OK ] Finished ifupdown-pre.serv… synchronize boot up for ifupdown.
Starting networking.service - Raise network interfaces...
[ OK ] Finished systemd-tmpfiles-…eate System Files and Directories.
[ OK ] Started systemd-udevd.serv…nager for Device Events and Files.
Starting systemd-update-ut…rd System Boot/Shutdown in UTMP...
[ OK ] Finished systemd-update-ut…cord System Boot/Shutdown in UTMP.
[ OK ] Finished networking.service - Raise network interfaces.
[ OK ] Reached target sysinit.target - System Initialization.
[ OK ] Started apt-daily.timer - Daily apt download activities.
[ OK ] Started apt-daily-upgrade.… apt upgrade and clean activities.
[ OK ] Started dpkg-db-backup.tim… Daily dpkg database backup timer.
[ OK ] Started e2scrub_all.timeretadata Check for All Filesystems.
[ OK ] Started fstrim.timer - Discard unused blocks once a week.
[ OK ] Started logrotate.timer - Daily rotation of log files.
[ OK ] Started systemd-tmpfiles-c… Cleanup of Temporary Directories.
[ OK ] Reached target timers.target - Timer Units.
[ OK ] Listening on dbus.socket- D-Bus System Message Bus Socket.
[ OK ] Reached target sockets.target - Socket Units.
[ OK ] Reached target basic.target - Basic System.
[ OK ] Started cron.service -…kground program processing daemon.
Starting dbus.service - D-Bus System Message Bus...
[ 4.090291] random: dbus-daemon: uninitialized urandom read (12 bytes read)
[ 4.094761] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[ 4.095757] random: dbus-daemon: uninitialized urandom read (12 bytes read)
Starting dhcpcd.serviceClient Daemon on a[ 4.125846] mmc_host mmc0: Bus speed (slot 0) = 25000000Hz (slot req 25000000Hz, actual 25000000HZ div = 0)
ll interfaces...
Starting e2scrub_reap.serv…e ext4 Metadata Check Snapshots...
[ OK ] Started rngd.service -…t entropy gathering daemon (rngd).
Starting systemd-logind.se…ice - User Login Management...
[ OK ] Started dbus.service - D-Bus System Message Bus.
[ 4.227070] random: dhcpcd: uninitialized urandom read (112 bytes read)
[ OK ] Finished e2scrub_reap.serv…ine ext4 Metadata Check Snapshots.
[ OK ] Started dhcpcd.service…P Client Daemon on all interfaces.
[ 4.382692] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[ 4.413647] mmc_host mmc0: Bus speed (slot 0) = 25000000Hz (slot req 25000000Hz, actual 25000000HZ div = 0)
[ 4.503195] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[ 4.534084] mmc_host mmc0: Bus speed (slot 0) = 25000000Hz (slot req 25000000Hz, actual 25000000HZ div = 0)
[ OK ] Found device dev-ttyAMA6.device - /dev/ttyAMA6.
[ OK ] Found device sys-subsystem… /sys/subsystem/net/devices/wlan0.
[ OK ] Started systemd-logind.service - User Login Management.
Starting wpa_supplicant.service - WPA supplicant...
[ OK ] Started wpa_supplicant@wla…pplicant daemon (interface wlan0).
[ OK ] Started wpa_supplicant.service - WPA supplicant.
[ OK ] Reached target network.target - Network.
Starting rc-local.servicem - /etc/rc.local Compatibility...
Starting systemd-user-sess…vice - Permit User Sessions...
[ OK ] Finished systemd-user-sess…ervice - Permit User Sessions.
[ 4.813924] wlcore: PHY firmware version: Rev 8.2.0.0.243
[ 4.855747] wlcore: firmware booted (Rev 8.9.0.0.83)
[ OK ] Listening on systemd-rfkil…l Switch Status /dev/rfkill Watch.
[ 5.160196] random: perl: uninitialized urandom read (4 bytes read)
[ 5.160472] random: perl: uninitialized urandom read (4 bytes read)
Starting systemd-rfkill.se…Load/Save RF Kill Switch Status...
[ OK ] Started systemd-rfkill.ser…- Load/Save RF Kill Switch Status.
[FAILED] Failed to start systemd-ra…rvice - Load/Save Random Seed.
See 'systemctl status systemd-random-seed.service' for details.
Starting systemd-tmpfiles-…leanup of Temporary Directories...
[ OK ] Finished systemd-tmpfiles-… Cleanup of Temporary Directories.
Starting dpkg-db-backup.se…ly dpkg database backup service...
Starting logrotate.service - Rotate log files...
[ OK ] Finished logrotate.service - Rotate log files.
[ OK ] Finished dpkg-db-backup.se…aily dpkg database backup service.
[ 5455.784659] random: crng init done
[ 5455.784677] random: 4 urandom warning(s) missed due to ratelimiting
[ 5456.550194] wlan0: regulatory prevented using AP config, downgraded
[ 5456.558903] wlan0: authenticate with 60:3a:7c:52:9c:1f (local address=c8:df:84:51:a3:37)
[ 5456.558921] wlan0: send auth to 60:3a:7c:52:9c:1f (try 1/3)
[ 5456.590316] wlan0: authenticated
[ 5456.592639] wlan0: associate with 60:3a:7c:52:9c:1f (try 1/3)
[ 5456.605995] wlan0: RX AssocResp from 60:3a:7c:52:9c:1f (capab=0x1411 status=0 aid=7)
[ 5456.611864] wlan0: associated
[ 5456.757448] wlcore: Association completed.
[ 5457.504924] rc.local[3182]: Creating SSH2 RSA key; this may take some time ...
[ 5457.520868] rc.local[3372]: 3072 SHA256:56rPkn/o+UyqD3RyCAbLdG43I7AAPSpE+1y/a/Zgj58 root@hikey970 (RSA)
[ 5457.532381] rc.local[3182]: Creating SSH2 ECDSA key; this may take some time ...
[ 5457.548809] rc.local[3378]: 256 SHA256:WcCAcLLnP5Hx5rpeUvS96VhfA9SoM0WhrUfxilGNiH4 root@hikey970 (ECDSA)
[ 5457.560235] rc.local[3182]: Creating SSH2 ED25519 key; this may take some time ...
[ 5457.576850] rc.local[3382]: 256 SHA256:xpi5Atfd/H4WQ1/CJiKlWgg46uLHLbuv1jRNxs/5bpU root@hikey970 (ED25519)
[ 5459.505834] rc.local[3435]: rescue-ssh.target is a disabled or a static unit not running, not starting it.
[ 5459.534486] rc.local[3435]: ssh.service is a disabled or a static unit not running, not starting it.
[ 5460.624655] rc.local[3463]: ssh.socket is a disabled or a static unit not running, not starting it.
[ OK ] Started rc-local.service - /etc/rc.local Compatibility.
[ OK ] Started serial-getty@ttyAM…ice - Serial Getty on ttyAMA6.
[ OK ] Reached target getty.target - Login Prompts.
[ OK ] Reached target multi-user.target - Multi-User System.
[ OK ] Reached target graphical.target - Graphical Interface.
Starting systemd-update-ut… Record Runlevel Change in UTMP...
[ OK ] Finished systemd-update-ut… - Record Runlevel Change in UTMP.
Debian GNU/Linux 12 hikey970 ttyAMA6
hikey970 login: [ 8657.205533] wlcore: Beacon loss detected. roles:0x1
[ 8662.180644] wlcore: Connection loss work (role_id: 0).
[ 8662.180667] wlan0: Connection to AP 60:3a:7c:52:9c:1f lost
[ 8663.066357] wlan0: regulatory prevented using AP config, downgraded
[ 8663.068569] wlan0: authenticate with 60:3a:7c:52:9c:1f (local address=c8:df:84:51:a3:37)
[ 8663.068579] wlan0: send auth to 60:3a:7c:52:9c:1f (try 1/3)
[ 8663.100514] wlan0: authenticated
[ 8663.104640] wlan0: associate with 60:3a:7c:52:9c:1f (try 1/3)
[ 8663.318269] wlan0: RX AssocResp from 60:3a:7c:52:9c:1f (capab=0x1411 status=0 aid=7)
[ 8663.324498] wlan0: associated
[ 8663.477246] wlcore: Association completed.
[ 8674.501387] wlcore: Beacon loss detected. roles:0x1
[ 8679.332645] wlcore: Connection loss work (role_id: 0).
[ 8679.332675] wlan0: Connection to AP 60:3a:7c:52:9c:1f lost
[ 8680.166475] wlan0: regulatory prevented using AP config, downgraded
[ 8680.168719] wlan0: authenticate with 60:3a:7c:52:9c:1f (local address=c8:df:84:51:a3:37)
[ 8680.168727] wlan0: send auth to 60:3a:7c:52:9c:1f (try 1/3)
[ 8680.200779] wlan0: authenticated
[ 8680.204642] wlan0: associate with 60:3a:7c:52:9c:1f (try 1/3)
[ 8680.323069] wlan0: RX AssocResp from 60:3a:7c:52:9c:1f (capab=0x1411 status=0 aid=7)
[ 8680.329171] wlan0: associated
[ 8680.569414] wlcore: Association completed.
hikey970 login: hi
Password:
Linux hikey970 6.19.0-rc2-dirty #4 SMP PREEMPT Tue Jan 6 22:18:57 CST 2026 aarch64
* Image Support: https://github.com/lucmann/hikey970-debian-image
The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.
Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
hi@hikey970:~$ cat /etc/default/
cron hwclock nss ssh
dbus networking ntpsec-ntpdate useradd
hi@hikey970:~$ ls -l /dev/hw
hwbinder hwrng
hi@hikey970:~$ ls -l /dev/hwrng
crw------- 1 root root 10, 183 Jun 26 22:58 /dev/hwrng
hi@hikey970:~$
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment