Skip to content

Instantly share code, notes, and snippets.

@lucmann

lucmann/v6.19-rc2.01062325

Created January 6, 2026 15:26
Show Gist options

  • Select an option

    Learn more about clone URLs
  • Save lucmann/a494159fffa7ef03f4455a9164b1e3ab to your computer and use it in GitHub Desktop.

Select an option

Learn more about clone URLs
Save lucmann/a494159fffa7ef03f4455a9164b1e3ab to your computer and use it in GitHub Desktop.
Download ZIP
Raw
v6.19-rc2.01062325
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[ 0.000000] Linux version 6.19.0-rc2-dirty (luc@vostro) (aarch64-linux-gnu-gcc (GCC) 15.1.0, GNU ld (GNU Binutils) 2.44) #4 SMP PREEMPT Tue Jan 6 22:18:57 CST 2026
[ 0.000000] KASLR disabled due to lack of seed
[ 0.000000] Machine model: HiKey970
[ 0.000000] earlycon: pl11 at MMIO 0x00000000fff32000 (options '115200')
[ 0.000000] printk: legacy bootconsole [pl11] enabled
[ 0.000000] efi: EFI v2.6 by EDK II
[ 0.000000] efi: MEMATTR=0xbe6b3698 MEMRESERVE=0xb6295f18
[ 0.000000] OF: reserved mem: Reserved memory: No reserved-memory node in the DT
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000000000-0x00000000ffffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal [mem 0x0000000100000000-0x00000001bfffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x00000000167fffff]
[ 0.000000] node 0: [mem 0x0000000016988000-0x00000000209fffff]
[ 0.000000] node 0: [mem 0x0000000020b00000-0x00000000320fffff]
[ 0.000000] node 0: [mem 0x0000000032101000-0x000000008e0fffff]
[ 0.000000] node 0: [mem 0x000000008e240000-0x00000000ba438fff]
[ 0.000000] node 0: [mem 0x00000000ba439000-0x00000000ba43cfff]
[ 0.000000] node 0: [mem 0x00000000ba43d000-0x00000000ba44ffff]
[ 0.000000] node 0: [mem 0x00000000ba450000-0x00000000ba68ffff]
[ 0.000000] node 0: [mem 0x00000000ba690000-0x00000000bf65ffff]
[ 0.000000] node 0: [mem 0x00000000bf660000-0x00000000bf69ffff]
[ 0.000000] node 0: [mem 0x00000000bf6a0000-0x00000000bf6affff]
[ 0.000000] node 0: [mem 0x00000000bf6b0000-0x00000000bf6fffff]
[ 0.000000] node 0: [mem 0x00000000bf700000-0x00000000bfffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x00000001bfffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000001bfffffff]
[ 0.000000] On node 0, zone DMA: 392 pages in unavailable ranges
[ 0.000000] On node 0, zone DMA: 256 pages in unavailable ranges
[ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.000000] On node 0, zone DMA: 320 pages in unavailable ranges
[ 0.000000] cma: Reserved 64 MiB at 0x00000000b6400000
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.1 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.0
[ 0.000000] percpu: Embedded 23 pages/cpu s56088 r8192 d29928 u94208
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: detected: ARM erratum 845719
[ 0.000000] alternatives: applying boot alternatives
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/Image.gz earlycon=pl011,0xfff32000,115200 clk_ignore_unused=true console=tty0 console=ttyAMA6,115200n8 root=/dev/sdd12 rootwait rw debug loglevel=7 initcall_debug efi=noruntime
[ 0.000000] printk: log_buf_len individual max cpu contribution: 4096 bytes
[ 0.000000] printk: log_buf_len total cpu_extra contributions: 28672 bytes
[ 0.000000] printk: log_buf_len min size: 16384 bytes
[ 0.000000] printk: log buffer data + meta data: 65536 + 229376 = 294912 bytes
[ 0.000000] printk: early log buf free: 13232(80%)
[ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.000000] software IO TLB: area num 8.
[ 0.000000] software IO TLB: mapped [mem 0x00000000ba6b3000-0x00000000be6b3000] (64MB)
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1571895
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] Root IRQ handler: gic_handle_irq
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] arch_timer: cp15 timer running at 1.92MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x1c570327e, max_idle_ns: 1763180809505 ns
[ 0.000000] sched_clock: 56 bits at 1920kHz, resolution 520ns, wraps every 4398046510977ns
[ 0.008913] Calibrating delay loop (skipped), value calculated using timer frequency.. 3.84 BogoMIPS (lpj=7680)
[ 0.019118] pid_max: default: 32768 minimum: 301
[ 0.023908] SELinux: Initializing.
[ 0.027797] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.035463] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.044516] cacheinfo: Unable to detect cache hierarchy for CPU 0
[ 0.051513] rcu: Hierarchical SRCU implementation.
[ 0.056354] rcu: Max phase no-delay instances is 1000.
[ 0.061851] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
[ 0.070940] EFI runtime services will be disabled.
[ 0.076064] smp: Bringing up secondary CPUs ...
[ 0.081149] Detected VIPT I-cache on CPU1
[ 0.081216] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[ 0.081766] Detected VIPT I-cache on CPU2
[ 0.081801] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[ 0.082297] Detected VIPT I-cache on CPU3
[ 0.082329] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[ 0.083323] CPU features: detected: Spectre-v2
[ 0.083332] CPU features: detected: Spectre-v4
[ 0.083334] CPU features: detected: Spectre-BHB
[ 0.083338] CPU features: detected: ARM erratum 858921
[ 0.083342] Detected VIPT I-cache on CPU4
[ 0.083373] arch_timer: Enabling local workaround for ARM erratum 858921
[ 0.083383] arch_timer: CPU4: Trapping CNTVCT access
[ 0.083389] CPU4: Booted secondary processor 0x0000000100 [0x410fd092]
[ 0.083890] Detected VIPT I-cache on CPU5
[ 0.083909] arch_timer: Enabling local workaround for ARM erratum 858921
[ 0.083914] arch_timer: CPU5: Trapping CNTVCT access
[ 0.083918] CPU5: Booted secondary processor 0x0000000101 [0x410fd092]
[ 0.084396] Detected VIPT I-cache on CPU6
[ 0.084416] arch_timer: Enabling local workaround for ARM erratum 858921
[ 0.084421] arch_timer: CPU6: Trapping CNTVCT access
[ 0.084426] CPU6: Booted secondary processor 0x0000000102 [0x410fd092]
[ 0.084943] Detected VIPT I-cache on CPU7
[ 0.084963] arch_timer: Enabling local workaround for ARM erratum 858921
[ 0.084968] arch_timer: CPU7: Trapping CNTVCT access
[ 0.084972] CPU7: Booted secondary processor 0x0000000103 [0x410fd092]
[ 0.085023] smp: Brought up 1 node, 8 CPUs
[ 0.229462] SMP: Total of 8 processors activated.
[ 0.234220] CPU: All CPU(s) started at EL2
[ 0.238391] CPU features: detected: 32-bit EL0 Support
[ 0.243583] CPU features: detected: 32-bit EL1 Support
[ 0.248784] CPU features: detected: CRC32 instructions
[ 0.253982] CPU features: detected: PMUv3
[ 0.258071] alternatives: applying system-wide alternatives
[ 0.265030] CPU features: emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching
[ 0.273775] Memory: 5991228K/6287580K available (17728K kernel code, 2202K rwdata, 9756K rodata, 3072K init, 361K bss, 226768K reserved, 65536K cma-reserved)
[ 0.290363] devtmpfs: initialized
[ 0.298631] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.308530] posixtimers hash table entries: 4096 (order: 4, 65536 bytes, linear)
[ 0.316133] futex hash table entries: 2048 (131072 bytes on 1 NUMA nodes, total 128 KiB, linear).
[ 0.326149] 24432 pages in range for non-PLT usage
[ 0.326154] 515952 pages in range for PLT usage
[ 0.337452] DMI not present or invalid.
[ 0.343217] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.350199] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[ 0.357599] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.365798] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.373936] audit: initializing netlink subsys (disabled)
[ 0.379558] audit: type=2000 audit(0.248:1): state=initialized audit_enabled=0 res=1
[ 0.389106] thermal_sys: Registered thermal governor 'fair_share'
[ 0.395310] cpuidle: using governor ladder
[ 0.399478] cpuidle: using governor menu
[ 0.403726] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.410737] ASID allocator initialised with 65536 entries
[ 0.417633] Serial: AMBA PL011 UART driver
[ 0.435435] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.442301] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page
[ 0.448639] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages
[ 0.455508] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page
[ 0.461841] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.468701] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.475033] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages
[ 0.481893] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page
[ 0.489810] ACPI: Interpreter disabled.
[ 0.494385] iommu: Default domain type: Translated
[ 0.499232] iommu: DMA domain TLB invalidation policy: strict mode
[ 0.506032] SCSI subsystem initialized
[ 0.510284] usbcore: registered new interface driver usbfs
[ 0.515861] usbcore: registered new interface driver hub
[ 0.521256] usbcore: registered new device driver usb
[ 0.526605] mc: Linux media interface: v0.10
[ 0.530984] videodev: Linux video capture interface: v2.00
[ 0.536639] pps_core: LinuxPPS API ver. 1 registered
[ 0.541656] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.550916] PTP clock support registered
[ 0.555601] Advanced Linux Sound Architecture Driver Initialized.
[ 0.562630] Bluetooth: Core ver 2.22
[ 0.566266] NET: Registered PF_BLUETOOTH protocol family
[ 0.571633] Bluetooth: HCI device and connection manager initialized
[ 0.578063] Bluetooth: HCI socket layer initialized
[ 0.582995] Bluetooth: L2CAP socket layer initialized
[ 0.588123] Bluetooth: SCO socket layer initialized
[ 0.593448] vgaarb: loaded
[ 0.596569] clocksource: Switched to clocksource arch_sys_counter
[ 0.603203] VFS: Disk quotas dquot_6.6.0
[ 0.607184] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.614761] pnp: PnP ACPI: disabled
[ 0.619081] NET: Registered PF_INET protocol family
[ 0.624234] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.635758] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[ 0.644462] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.652308] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.660618] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[ 0.669519] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.676264] UDP hash table entries: 4096 (order: 6, 262144 bytes, linear)
[ 0.683306] UDP-Lite hash table entries: 4096 (order: 6, 262144 bytes, linear)
[ 0.690988] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.697775] PCI: CLS 0 bytes, default 64
[ 0.705789] kvm [1]: nv: 568 coarse grained trap handlers
[ 0.711673] kvm [1]: IPA Size Limit: 40 bits
[ 0.717752] kvm [1]: vgic interrupt IRQ9
[ 0.721746] kvm [1]: Hyp nVHE mode initialized successfully
[ 0.729235] Initialise system trusted keyrings
[ 0.733928] workingset: timestamp_bits=46 max_order=21 bucket_order=0
[ 0.740978] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.746979] fuse: init (API version 7.45)
[ 0.751150] 9p: Installing v9fs 9p2000 file system support
[ 0.757644] cryptd: max_cpu_qlen set to 1000
[ 0.802879] Key type asymmetric registered
[ 0.807036] Asymmetric key parser 'x509' registered
[ 0.812057] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[ 0.819552] io scheduler mq-deadline registered
[ 0.824148] io scheduler kyber registered
[ 0.828245] io scheduler bfq registered
[ 0.835343] pinctrl-single e896c000.pinmux: 459 pins, size 1836
[ 0.842222] pinctrl-single fff11000.pinmux: 463 pins, size 1852
[ 0.848791] pinctrl-single e896c800.pinmux: 459 pins, size 1836
[ 0.855068] pinctrl-single fc182000.pinmux: 10 pins, size 40
[ 0.860957] pinctrl-single fc182800.pinmux: 10 pins, size 40
[ 0.866844] pinctrl-single ff37e000.pinmux: 12 pins, size 48
[ 0.872730] pinctrl-single ff37e800.pinmux: 12 pins, size 48
[ 0.879071] pinctrl-single fff11800.pinmux: 463 pins, size 1852
[ 0.887914] pl061_gpio e8a0b000.gpio: PL061 GPIO chip registered
[ 0.894321] pl061_gpio e8a0c000.gpio: PL061 GPIO chip registered
[ 0.900713] pl061_gpio e8a0d000.gpio: PL061 GPIO chip registered
[ 0.907092] pl061_gpio e8a0e000.gpio: PL061 GPIO chip registered
[ 0.913473] pl061_gpio e8a0f000.gpio: PL061 GPIO chip registered
[ 0.919853] pl061_gpio e8a10000.gpio: PL061 GPIO chip registered
[ 0.926344] pl061_gpio e8a11000.gpio: PL061 GPIO chip registered
[ 0.932744] pl061_gpio e8a12000.gpio: PL061 GPIO chip registered
[ 0.939125] pl061_gpio e8a13000.gpio: PL061 GPIO chip registered
[ 0.945519] pl061_gpio e8a14000.gpio: PL061 GPIO chip registered
[ 0.951914] pl061_gpio e8a15000.gpio: PL061 GPIO chip registered
[ 0.958297] pl061_gpio e8a16000.gpio: PL061 GPIO chip registered
[ 0.964682] pl061_gpio e8a17000.gpio: PL061 GPIO chip registered
[ 0.971054] pl061_gpio e8a18000.gpio: PL061 GPIO chip registered
[ 0.977433] pl061_gpio e8a19000.gpio: PL061 GPIO chip registered
[ 0.983812] pl061_gpio e8a1a000.gpio: PL061 GPIO chip registered
[ 0.990210] pl061_gpio e8a1b000.gpio: PL061 GPIO chip registered
[ 0.996604] pl061_gpio e8a1c000.gpio: PL061 GPIO chip registered
[ 1.002990] pl061_gpio fff28000.gpio: PL061 GPIO chip registered
[ 1.009369] pl061_gpio fff29000.gpio: PL061 GPIO chip registered
[ 1.015748] pl061_gpio e8a1f000.gpio: PL061 GPIO chip registered
[ 1.022130] pl061_gpio e8a20000.gpio: PL061 GPIO chip registered
[ 1.028578] pl061_gpio fff0b000.gpio: PL061 GPIO chip registered
[ 1.035032] pl061_gpio fff0c000.gpio: PL061 GPIO chip registered
[ 1.041426] pl061_gpio fff0d000.gpio: PL061 GPIO chip registered
[ 1.047808] pl061_gpio fff0e000.gpio: PL061 GPIO chip registered
[ 1.054201] pl061_gpio fff0f000.gpio: PL061 GPIO chip registered
[ 1.060600] pl061_gpio fff10000.gpio: PL061 GPIO chip registered
[ 1.066979] pl061_gpio fff1d000.gpio: PL061 GPIO chip registered
[ 1.073845] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.095497] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.104079] msm_serial: driver initialized
[ 1.108335] SuperH (H)SCI(F) driver initialized
[ 1.120549] brd: module loaded
[ 1.128377] loop: module loaded
[ 1.134572] tun: Universal TUN/TAP device driver, 1.6
[ 1.139883] CAN device driver interface
[ 1.144324] e1000e: Intel(R) PRO/1000 Network Driver
[ 1.149341] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 1.155379] igb: Intel(R) Gigabit Ethernet Network Driver
[ 1.160836] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 1.166518] igbvf: Intel(R) Gigabit Virtual Function Network Driver
[ 1.172853] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[ 1.178892] sky2: driver version 1.30
[ 1.182854] PPP generic driver version 2.4.2
[ 1.187319] PPP BSD Compression module registered
[ 1.192094] PPP Deflate Compression module registered
[ 1.197216] PPP MPPE Compression module registered
[ 1.202231] usbcore: registered new interface driver asix
[ 1.207743] usbcore: registered new interface driver ax88179_178a
[ 1.213952] usbcore: registered new interface driver cdc_ether
[ 1.219901] usbcore: registered new interface driver net1080
[ 1.225674] usbcore: registered new interface driver cdc_subset
[ 1.231710] usbcore: registered new interface driver zaurus
[ 1.237411] usbcore: registered new interface driver cdc_ncm
[ 1.243349] VFIO - User Level meta-driver version: 0.3
[ 1.250638] usbcore: registered new interface driver usb-storage
[ 1.257785] mousedev: PS/2 mouse device common for all mice
[ 1.263582] usbcore: registered new interface driver xpad
[ 1.269099] usbcore: registered new interface driver usb_acecad
[ 1.275138] usbcore: registered new interface driver aiptek
[ 1.280828] usbcore: registered new interface driver hanwang
[ 1.286603] usbcore: registered new interface driver kbtab
[ 1.293076] i2c_dev: i2c /dev entries driver
[ 1.298080] usbcore: registered new interface driver uvcvideo
[ 1.304965] device-mapper: uevent: version 1.0.3
[ 1.309752] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: dm-devel@lists.linux.dev
[ 1.318870] Bluetooth: HCI UART driver ver 2.3
[ 1.323367] Bluetooth: HCI UART protocol H4 registered
[ 1.328978] sdhci: Secure Digital Host Controller Interface driver
[ 1.335226] sdhci: Copyright(c) Pierre Ossman
[ 1.339836] Synopsys Designware Multimedia Card Interface Driver
[ 1.346268] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.352643] ufshcd-hisi ff3c0000.ufs: ufshcd_populate_vreg: Unable to find vdd-hba-supply regulator, assuming enabled
[ 1.363375] ufshcd-hisi ff3c0000.ufs: ufshcd_populate_vreg: Unable to find vcc-supply regulator, assuming enabled
[ 1.373752] ufshcd-hisi ff3c0000.ufs: ufshcd_populate_vreg: Unable to find vccq-supply regulator, assuming enabled
[ 1.384216] ufshcd-hisi ff3c0000.ufs: ufshcd_populate_vreg: Unable to find vccq2-supply regulator, assuming enabled
[ 1.394789] ufshcd-hisi ff3c0000.ufs: invalid ref_clk setting = 3200000
[ 1.426221] scsi host0: ufshcd
[ 1.675352] scsi 0:0:0:49488: Well-known LUN SAMSUNG KLUCG4J1ED-B0C1 0300 PQ: 0 ANSI: 6
[ 1.684133] hid: raw HID events driver (C) Jiri Kosina
[ 1.689721] scsi 0:0:0:49476: Well-known LUN SAMSUNG KLUCG4J1ED-B0C1 0300 PQ: 0 ANSI: 6
[ 1.699639] scsi 0:0:0:49456: Well-known LUN SAMSUNG KLUCG4J1ED-B0C1 0300 PQ: 0 ANSI: 6
[ 1.709660] scsi 0:0:0:0: Direct-Access SAMSUNG KLUCG4J1ED-B0C1 0300 PQ: 0 ANSI: 6
[ 1.718183] sd 0:0:0:0: [sda] 1024 4096-byte logical blocks: (4.19 MB/4.00 MiB)
[ 1.718260] scsi 0:0:0:1: Direct-Access SAMSUNG KLUCG4J1ED-B0C1 0300 PQ: 0 ANSI: 6
[ 1.719542] sd 0:0:0:1: [sdb] 1024 4096-byte logical blocks: (4.19 MB/4.00 MiB)
[ 1.719602] sd 0:0:0:1: [sdb] Write Protect is off
[ 1.719717] sd 0:0:0:1: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ 1.719768] sd 0:0:0:1: [sdb] Preferred minimum I/O size 8192 bytes
[ 1.719776] sd 0:0:0:1: [sdb] Optimal transfer size 8192 bytes
[ 1.725639] sd 0:0:0:0: [sda] Write Protect is off
[ 1.733962] scsi 0:0:0:2: Direct-Access SAMSUNG KLUCG4J1ED-B0C1 0300 PQ: 0 ANSI: 6
[ 1.735208] sd 0:0:0:2: [sdc] 2048 4096-byte logical blocks: (8.39 MB/8.00 MiB)
[ 1.735266] sd 0:0:0:2: [sdc] Write Protect is off
[ 1.735376] sd 0:0:0:2: [sdc] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ 1.735425] sd 0:0:0:2: [sdc] Preferred minimum I/O size 8192 bytes
[ 1.735430] sd 0:0:0:2: [sdc] Optimal transfer size 8192 bytes
[ 1.754738] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ 1.754801] scsi 0:0:0:3: Direct-Access SAMSUNG KLUCG4J1ED-B0C1 0300 PQ: 0 ANSI: 6
[ 1.756101] sd 0:0:0:3: [sdd] 15616000 4096-byte logical blocks: (64.0 GB/59.6 GiB)
[ 1.756155] sd 0:0:0:3: [sdd] Write Protect is off
[ 1.756256] sd 0:0:0:3: [sdd] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ 1.756301] sd 0:0:0:3: [sdd] Preferred minimum I/O size 8192 bytes
[ 1.756304] sd 0:0:0:3: [sdd] Optimal transfer size 8192 bytes
[ 1.766869] sd 0:0:0:0: [sda] Preferred minimum I/O size 8192 bytes
[ 1.779865] sd 0:0:0:0: [sda] Optimal transfer size 8192 bytes
[ 1.875446] usbcore: registered new interface driver usbhid
[ 1.881084] usbhid: USB HID core driver
[ 1.884900] sd 0:0:0:1: [sdb] Attached SCSI disk
[ 1.888764] sd 0:0:0:2: [sdc] Attached SCSI disk
[ 1.896672] u32 classifier
[ 1.899401] input device check on
[ 1.903102] Actions configured
[ 1.906300] GPT:Primary header thinks Alt. header is not at the end of the disk.
[ 1.914005] GPT:7805956 != 15615999
[ 1.917526] GPT:Alternate GPT header not at the end of the disk.
[ 1.917529] GPT:7805956 != 15615999
[ 1.927109] GPT: Use GNU Parted to correct GPT errors.
[ 1.927127] sdd: sdd1 sdd2 sdd3 sdd4 sdd5 sdd6 sdd7 sdd8 sdd9 sdd10 sdd11 sdd12 sdd13 sdd14 sdd15
[ 1.942259] sd 0:0:0:3: [sdd] Attached SCSI disk
[ 1.948268] xt_time: kernel timezone is -0000
[ 1.952982] Initializing XFRM netlink socket
[ 1.956908] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.961999] NET: Registered PF_INET6 protocol family
[ 1.967706] Segment Routing with IPv6
[ 1.971439] In-situ OAM (IOAM) with IPv6
[ 1.975556] mip6: Mobile IPv6
[ 1.978610] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 1.985038] NET: Registered PF_PACKET protocol family
[ 1.990163] PFKEY is deprecated and scheduled to be removed in 2027, please contact the netdev mailing list
[ 2.000014] NET: Registered PF_KEY protocol family
[ 2.004872] can: controller area network core
[ 2.009296] NET: Registered PF_CAN protocol family
[ 2.014156] can: raw protocol
[ 2.017172] can: broadcast manager protocol
[ 2.021444] can: netlink gateway - max_hops=1
[ 2.025933] Bluetooth: RFCOMM TTY layer initialized
[ 2.030878] Bluetooth: RFCOMM socket layer initialized
[ 2.036088] Bluetooth: RFCOMM ver 1.11
[ 2.039898] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 2.045885] Bluetooth: HIDP socket layer initialized
[ 2.051210] 9pnet: Installing 9P2000 support
[ 2.068694] registered taskstats version 1
[ 2.072870] Loading compiled-in X.509 certificates
[ 2.099608] fdf02000.serial: ttyAMA0 at MMIO 0xfdf02000 (irq = 44, base_baud = 0) is a PL011 rev2
[ 2.109149] fdf03000.serial: ttyAMA2 at MMIO 0xfdf03000 (irq = 45, base_baud = 0) is a PL011 rev2
[ 2.118422] fff32000.serial: ttyAMA6 at MMIO 0xfff32000 (irq = 46, base_baud = 0) is a PL011 rev2
[ 2.127467] printk: console [ttyAMA6] enabled
[ 2.127467] printk: console [ttyAMA6] enabled
[ 2.136347] printk: legacy bootconsole [pl11] disabled
[ 2.136347] printk: legacy bootconsole [pl11] disabled
[ 2.150358] dwmmc_k3 fc183000.dwmmc2: fifo-depth property not found, using value of FIFOTH register as default
[ 2.152497] dwmmc_k3 fc183000.dwmmc2: IDMAC supports 64-bit address mode.
[ 2.152513] dwmmc_k3 fc183000.dwmmc2: Using internal DMA controller.
[ 2.152518] dwmmc_k3 fc183000.dwmmc2: Version ID is 270a
[ 2.152549] dwmmc_k3 fc183000.dwmmc2: DW MMC controller at irq 47,32 bit host data width,256 deep fifo
[ 2.152703] mmc_host mmc0: card is non-removable.
[ 2.243118] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[ 2.257290] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 2.257972] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 2.258341] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
[ 2.258390] faux_driver regulatory: Direct firmware load for regulatory.db failed with error -2
[ 2.258395] cfg80211: failed to load regulatory.db
[ 2.258497] clk: Not disabling unused clocks
[ 2.258509] PM: genpd: Disabling unused power domains
[ 2.258545] ALSA device list:
[ 2.258547] No soundcards found.
[ 2.262590] dwmmc_k3 fc183000.dwmmc2: card claims to support voltages below defined range
[ 2.273967] mmc_host mmc0: Bus speed (slot 0) = 25000000Hz (slot req 25000000Hz, actual 25000000HZ div = 0)
[ 2.275730] mmc0: new SDIO card at address 0001
[ 2.276325] wl18xx_driver wl18xx.0.auto: Direct firmware load for ti-connectivity/wl1271-nvs.bin failed with error -2
[ 2.276340] wl18xx_driver wl18xx.0.auto: Direct firmware load for ti-connectivity/wl18xx-conf.bin failed with error -2
[ 2.276343] wlcore: ERROR could not get configuration binary ti-connectivity/wl18xx-conf.bin: -2
[ 2.276346] wlcore: WARNING falling back to default config
[ 2.291393] check access for rdinit=/init failed: -2, ignoring
[ 2.295388] EXT4-fs (sdd12): mounted filesystem d3c235dd-fb3a-4da5-89f9-6475720cd2bf r/w without journal. Quota mode: none.
[ 2.295421] VFS: Mounted root (ext4 filesystem) on device 8:60.
[ 2.296279] devtmpfs: mounted
[ 2.296853] Freeing unused kernel memory: 3072K
SELinux: Could not open policy file <= /etc/selinux/targeted/pol[ 2.296906] Run /sbin/init as init process
icy/policy.35: No such file or directory
[ 2.394642] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[ 2.407800] systemd[1]: System time before build time, advancing clock.
[ 2.424564] mmc_host mmc0: Bus speed (slot 0) = 25000000Hz (slot req 25000000Hz, actual 25000000HZ div = 0)
[ 2.441901] systemd[1]: Failed to find module 'autofs4'
[ 2.459378] systemd[1]: systemd 252.39-1~deb12u1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
[ 2.459394] systemd[1]: Detected architecture arm64.
Welcome to Debian GNU/Linux 12 (bookworm)!
[ 2.504758] systemd[1]: Hostname set to <hikey970>.
[ 2.515139] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[ 2.546283] mmc_host mmc0: Bus speed (slot 0) = 25000000Hz (slot req 25000000Hz, actual 25000000HZ div = 0)
[ OK ] Created slice system-getty.slice - Slice /system/getty.
[ OK ] Created slice system-modpr…lice - Slice /system/modprobe.
[ OK ] Created slice system-seria… - Slice /system/serial-getty.
[ OK ] Created slice system-wpa_s…0m - Slice /system/wpa_supplicant.
[ OK ] Created slice user.slice - User and Session Slice.
[ OK ] Started systemd-ask-passwo…quests to Console Directory Watch.
[ OK ] Started systemd-ask-passwo… Requests to Wall Directory Watch.
Expecting device dev-ttyAMA6.device - /dev/[ 2.749129] wlcore: wl18xx HW: 183x or 180x, PG 2.2 (ROM 0x11)
ttyAMA6...
[ 2.750950] wlcore: loaded
Expecting device sys-subsy…sys/subsystem/net/devices/wlan0...
[ OK ] Reached target cryptsetup.…get - Local Encrypted Volumes.
[ OK ] Reached target integrityse…Local Integrity Protected Volumes.
[ OK ] Reached target paths.target - Path Units.
[ OK ] Reached target remote-fs.target - Remote File Systems.
[ OK ] Reached target slices.target - Slice Units.
[ OK ] Reached target swap.target - Swaps.
[ OK ] Reached target veritysetup… - Local Verity Protected Volumes.
[ OK ] Listening on systemd-initc… initctl Compatibility Named Pipe.
[ OK ] Listening on systemd-journ…socket - Journal Audit Socket.
[ OK ] Listening on systemd-journ…t - Journal Socket (/dev/log).
[ OK ] Listening on systemd-journald.socket - Journal Socket.
[ OK ] Listening on systemd-udevd….socket - udev Control Socket.
[ OK ] Listening on systemd-udevd…l.socket - udev Kernel Socket.
Mounting dev-hugepages.mount - Huge Pages File System...
Mounting dev-mqueue.mountPOSIX Message Queue File System...
Mounting sys-kernel-debug.… - Kernel Debug File System...
Starting modprobe@configfs…m - Load Kernel Module configfs...
Starting modprobe@dm_mod.s…[0m - Load Kernel Module dm_mod...
Starting modprobe@drm.service - Load Kernel Module drm...
Starting modprobe@efi_psto…- Load Kernel Module efi_pstore...
Starting modprobe@fuse.ser…e - Load Kernel Module fuse...
Starting modprobe@loop.ser…e - Load Kernel Module loop...
Starting systemd-journald.service - Journal Service...
Starting systemd-modules-l…rvice - Load Kernel Modules...
Starting systemd-remount-f…nt Root and Kernel File Systems...
[ 3.122934] systemd-journald[1644]: /dev/kmsg buffer overrun, some messages lost.
Starting systemd-udev-trig…[0m - Coldplug All udev Devices...
[ OK ] Mounted dev-hugepages.mount - Huge Pages File System.
[ OK ] Mounted dev-mqueue.mount- POSIX Message Queue File System.
[ OK ] Mounted sys-kernel-debug.m…nt - Kernel Debug File System.
[ OK ] Finished modprobe@configfs…[0m - Load Kernel Module configfs.
[ OK ] Started systemd-journald.service - Journal Service.
[ OK ] Finished modprobe@dm_mod.s…e - Load Kernel Module dm_mod.
[ OK ] Finished modprobe@drm.service - Load Kernel Module drm.
[ OK ] Finished modprobe@efi_psto…m - Load Kernel Module efi_pstore.
[ OK ] Finished modprobe@fuse.service - Load Kernel Module fuse.
[ OK ] Finished modprobe@loop.service - Load Kernel Module loop.
[ OK ] Finished systemd-modules-l…service - Load Kernel Modules.
[ OK ] Finished systemd-remount-f…ount Root and Kernel File Systems.
Mounting sys-fs-fuse-conne… - FUSE Control File System...
Mounting sys-kernel-config…ernel Configuration File System...
Starting systemd-journal-f…h Journal to Persistent Storage...
Starting systemd-random-se…ice - Load/Save Random Seed...
[ 3.376675] systemd-journald[1644]: Received client request to flush runtime journal.
Starting systemd-sysctl.se…ce - Apply Kernel Variables...
Starting systemd-sysusers.…rvice - Create System Users...
[ OK ] Finished systemd-udev-trig…e - Coldplug All udev Devices.
[ OK ] Mounted sys-fs-fuse-connec…nt - FUSE Control File System.
[ OK ] Mounted sys-kernel-config.… Kernel Configuration File System.
[ OK ] Finished systemd-sysctl.service - Apply Kernel Variables.
[ OK ] Finished systemd-sysusers.service - Create System Users.
Starting ifupdown-pre.serv…ynchronize boot up for ifupdown...
Starting systemd-tmpfiles-…ate Static Device Nodes in /dev...
[ OK ] Finished systemd-journal-f…ush Journal to Persistent Storage.
[ OK ] Finished ifupdown-pre.serv… synchronize boot up for ifupdown.
[ OK ] Finished systemd-tmpfiles-…reate Static Device Nodes in /dev.
[ OK ] Reached target local-fs-pr…reparation for Local File Systems.
[ OK ] Reached target local-fs.target - Local File Systems.
Starting networking.service - Raise network interfaces...
Starting systemd-tmpfiles-…te System Files and Directories...
Starting systemd-udevd.ser…ger for Device Events and Files...
[ OK ] Finished systemd-tmpfiles-…eate System Files and Directories.
Starting systemd-update-ut…rd System Boot/Shutdown in UTMP...
[ OK ] Finished systemd-update-ut…cord System Boot/Shutdown in UTMP.
[ OK ] Finished networking.service - Raise network interfaces.
[ OK ] Started systemd-udevd.serv…nager for Device Events and Files.
[ OK ] Reached target sysinit.target - System Initialization.
[ OK ] Started apt-daily.timer - Daily apt download activities.
[ OK ] Started apt-daily-upgrade.… apt upgrade and clean activities.
[ OK ] Started dpkg-db-backup.tim… Daily dpkg database backup timer.
[ OK ] Started e2scrub_all.timeretadata Check for All Filesystems.
[ OK ] Started fstrim.timer - Discard unused blocks once a week.
[ OK ] Started logrotate.timer - Daily rotation of log files.
[ OK ] Started systemd-tmpfiles-c… Cleanup of Temporary Directories.
[ OK ] Reached target timers.target - Timer Units.
[ OK ] Listening on dbus.socket- D-Bus System Message Bus Socket.
[ OK ] Reached target sockets.target - Socket Units.
[ OK ] Reached target basic.target - Basic System.
[ OK ] Started cron.service -…kground program processing daemon.
Starting dbus.service - D-Bus System Message Bus...
[ 4.032226] random: dbus-daemon: uninitialized urandom read (12 bytes read)
Starting dhcpcd.serviceClient Daemon on a[ 4.035159] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
ll interfaces...
[ 4.062170] random: dbus-daemon: uninitialized urandom read (12 bytes read)
Starting e2scrub_reap.serv…e ext4 Metadata Check Snapshots...
[ 4.078438] mmc_host mmc0: Bus speed (slot 0) = 25000000Hz (slot req 25000000Hz, actual 25000000HZ div = 0)
Starting systemd-logind.se…ice - User Login Management...
[ OK ] Started dbus.service - D-Bus System Message Bus.
[ 4.120071] random: dhcpcd: uninitialized urandom read (112 bytes read)
[ OK ] Finished e2scrub_reap.serv…ine ext4 Metadata Check Snapshots.
[ OK ] Started dhcpcd.service…P Client Daemon on all interfaces.
[ 4.310725] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[ 4.341822] mmc_host mmc0: Bus speed (slot 0) = 25000000Hz (slot req 25000000Hz, actual 25000000HZ div = 0)
[ 4.430691] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[ OK ] Found device dev-ttyAMA6.device - /dev/ttyAMA6.
[ OK ] Found device sys-subsystem… /sys/s[ 4.461664] mmc_host mmc0: Bus speed (slot 0) = 25000000Hz (slot req 25000000Hz, actual 25000000HZ div = 0)
ubsystem/net/devices/wlan0.
[ OK ] Started systemd-logind.service - User Login Management.
[ OK ] Listening on systemd-rfkil…l Switch Status /dev/rfkill Watch.
Starting wpa_supplicant.service - WPA supplicant...
[ OK ] Started wpa_supplicant@wla…pplicant daemon (interface wlan0).
[ OK ] Started wpa_supplicant.service - WPA supplicant.
[ OK ] Reached target network.target - Network.
Starting rc-local.servicem - /etc/rc.local Compatibility...
Starting systemd-rfkill.se…Load/Save RF Kill Switch Status...
Starting systemd-user-sess…vice - Permit User Sessions...
[ OK ] Started systemd-rfkill.ser…- Load/Save RF Kill Switch Status.
[ OK ] Finished systemd-user-sess…ervice - Permit User Sessions.
[ 4.744893] wlcore: PHY firmware version: Rev 8.2.0.0.243
[ 4.831723] wlcore: firmware booted (Rev 8.9.0.0.83)
[ 5.238147] random: perl: uninitialized urandom read (4 bytes read)
[ 5.238418] random: perl: uninitialized urandom read (4 bytes read)
[FAILED] Failed to start systemd-ra…rvice - Load/Save Random Seed.
See 'systemctl status systemd-random-seed.service' for details.
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment