Skip to content

Instantly share code, notes, and snippets.

@lucmann
Last active January 16, 2026 23:20
Show Gist options
  • Select an option

  • Save lucmann/a43e88dcd3352033081b87725e717131 to your computer and use it in GitHub Desktop.

Select an option

Save lucmann/a43e88dcd3352033081b87725e717131 to your computer and use it in GitHub Desktop.
sd card boot
sdb 8:16 0 4M 0 disk
sdc 8:32 0 8M 0 disk
sdd 8:48 0 59.6G 0 disk
├─sdd1 8:49 0 1M 0 part
├─sdd2 8:50 0 12M 0 part
├─sdd3 8:51 0 6M 0 part
├─sdd4 8:52 0 12M 0 part
├─sdd5 8:53 0 256M 0 part
├─sdd6 8:54 0 1M 0 part
├─sdd7 8:55 0 80M 0 part
├─sdd8 8:56 0 16M 0 part
├─sdd9 8:57 0 16M 0 part
├─sdd10 8:58 0 16M 0 part
├─sdd11 8:59 0 2M 0 part
├─sdd12 8:60 0 4.6G 0 part
├─sdd13 8:61 0 784M 0 part
├─sdd14 8:62 0 1M 0 part
└─sdd15 8:63 0 24G 0 part
mmcblk0 179:0 0 14.8G 0 disk
├─mmcblk0p1 179:1 0 256M 0 part
└─mmcblk0p2 179:2 0 14.4G 0 part /
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[ 0.000000] Linux version 6.19.0-rc2-dirty (luc@vostro) (clang version 21.1.4, GNU ld (GNU Binutils) 2.44) #17 SMP PREEMPT Mon Jan 12 23:44:46 CST 2026
[ 0.000000] KASLR disabled due to lack of seed
[ 0.000000] Machine model: HiKey970
[ 0.000000] earlycon: pl11 at MMIO 0x00000000fff32000 (options '115200')
[ 0.000000] printk: legacy bootconsole [pl11] enabled
[ 0.000000] efi: EFI v2.6 by EDK II
[ 0.000000] efi: MEMATTR=0xbe605018 MEMRESERVE=0xba405c18
[ 0.000000] OF: reserved mem: Reserved memory: No reserved-memory node in the DT
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000000000-0x00000000ffffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal [mem 0x0000000100000000-0x00000001bfffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x00000000167fffff]
[ 0.000000] node 0: [mem 0x0000000016988000-0x00000000209fffff]
[ 0.000000] node 0: [mem 0x0000000020b00000-0x00000000320fffff]
[ 0.000000] node 0: [mem 0x0000000032101000-0x000000008e0fffff]
[ 0.000000] node 0: [mem 0x000000008e240000-0x00000000ba3effff]
[ 0.000000] node 0: [mem 0x00000000ba3f0000-0x00000000ba3fffff]
[ 0.000000] node 0: [mem 0x00000000ba400000-0x00000000ba438fff]
[ 0.000000] node 0: [mem 0x00000000ba439000-0x00000000ba43cfff]
[ 0.000000] node 0: [mem 0x00000000ba43d000-0x00000000ba44ffff]
[ 0.000000] node 0: [mem 0x00000000ba450000-0x00000000ba68ffff]
[ 0.000000] node 0: [mem 0x00000000ba690000-0x00000000bf65ffff]
[ 0.000000] node 0: [mem 0x00000000bf660000-0x00000000bf69ffff]
[ 0.000000] node 0: [mem 0x00000000bf6a0000-0x00000000bf6affff]
[ 0.000000] node 0: [mem 0x00000000bf6b0000-0x00000000bf6fffff]
[ 0.000000] node 0: [mem 0x00000000bf700000-0x00000000bfffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x00000001bfffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000001bfffffff]
[ 0.000000] On node 0, zone DMA: 392 pages in unavailable ranges
[ 0.000000] On node 0, zone DMA: 256 pages in unavailable ranges
[ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.000000] On node 0, zone DMA: 320 pages in unavailable ranges
[ 0.000000] cma: Reserved 64 MiB at 0x00000000b6200000
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.1 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.0
[ 0.000000] percpu: Embedded 23 pages/cpu s56024 r8192 d29992 u94208
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: detected: ARM erratum 845719
[ 0.000000] alternatives: applying boot alternatives
[ 0.000000] Kernel command line: BOOT_IMAGE=/Image-hikey970-v6.19.0-rc2.gz earlycon=pl011,0xfff32000,115200 clk_ignore_unused=true console=tty0 console=ttyAMA6,115200n8 root=/dev/mmcblk0p
2 rootwait rw debug loglevel=7 initcall_debug efi=noruntime dw_mmc.debug=1
[ 0.000000] printk: log_buf_len individual max cpu contribution: 4096 bytes
[ 0.000000] printk: log_buf_len total cpu_extra contributions: 28672 bytes
[ 0.000000] printk: log_buf_len min size: 16384 bytes
[ 0.000000] printk: log buffer data + meta data: 65536 + 229376 = 294912 bytes
[ 0.000000] printk: early log buf free: 13072(79%)
[ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.000000] software IO TLB: area num 8.
[ 0.000000] software IO TLB: mapped [mem 0x00000000af400000-0x00000000b3400000] (64MB)
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1571895
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] Root IRQ handler: gic_handle_irq
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] arch_timer: cp15 timer running at 1.92MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x1c570327e, max_idle_ns: 1763180809505 ns
[ 0.000000] sched_clock: 56 bits at 1920kHz, resolution 520ns, wraps every 4398046510977ns
[ 0.008922] Calibrating delay loop (skipped), value calculated using timer frequency.. 3.84 BogoMIPS (lpj=7680)
[ 0.019127] pid_max: default: 32768 minimum: 301
[ 0.023916] SELinux: Initializing.
[ 0.027796] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.035461] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.044493] cacheinfo: Unable to detect cache hierarchy for CPU 0
[ 0.051484] rcu: Hierarchical SRCU implementation.
[ 0.056324] rcu: Max phase no-delay instances is 1000.
[ 0.061806] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
[ 0.070941] EFI runtime services will be disabled.
[ 0.076060] smp: Bringing up secondary CPUs ...
[ 0.081136] Detected VIPT I-cache on CPU1
[ 0.081199] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[ 0.081741] Detected VIPT I-cache on CPU2
[ 0.081774] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[ 0.082260] Detected VIPT I-cache on CPU3
[ 0.082290] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[ 0.083290] CPU features: detected: Spectre-v2
[ 0.083297] CPU features: detected: Spectre-v4
[ 0.083300] CPU features: detected: Spectre-BHB
[ 0.083303] CPU features: detected: ARM erratum 858921
[ 0.083307] Detected VIPT I-cache on CPU4
[ 0.083335] arch_timer: Enabling local workaround for ARM erratum 858921
[ 0.083345] arch_timer: CPU4: Trapping CNTVCT access
[ 0.083351] CPU4: Booted secondary processor 0x0000000100 [0x410fd092]
[ 0.083846] Detected VIPT I-cache on CPU5
[ 0.083865] arch_timer: Enabling local workaround for ARM erratum 858921
[ 0.083870] arch_timer: CPU5: Trapping CNTVCT access
[ 0.083874] CPU5: Booted secondary processor 0x0000000101 [0x410fd092]
[ 0.084348] Detected VIPT I-cache on CPU6
[ 0.084366] arch_timer: Enabling local workaround for ARM erratum 858921
[ 0.084371] arch_timer: CPU6: Trapping CNTVCT access
[ 0.084376] CPU6: Booted secondary processor 0x0000000102 [0x410fd092]
[ 0.084885] Detected VIPT I-cache on CPU7
[ 0.084903] arch_timer: Enabling local workaround for ARM erratum 858921
[ 0.084908] arch_timer: CPU7: Trapping CNTVCT access
[ 0.084913] CPU7: Booted secondary processor 0x0000000103 [0x410fd092]
[ 0.084962] smp: Brought up 1 node, 8 CPUs
[ 0.229402] SMP: Total of 8 processors activated.
[ 0.234159] CPU: All CPU(s) started at EL2
[ 0.238328] CPU features: detected: 32-bit EL0 Support
[ 0.243520] CPU features: detected: 32-bit EL1 Support
[ 0.248722] CPU features: detected: CRC32 instructions
[ 0.253920] CPU features: detected: PMUv3
[ 0.258009] alternatives: applying system-wide alternatives
[ 0.265291] CPU features: emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching
[ 0.274028] Memory: 5987256K/6287580K available (17088K kernel code, 2210K rwdata, 9012K rodata, 8384K init, 361K bss, 230740K reserved, 65536K cma-reserved)
[ 0.290619] devtmpfs: initialized
[ 0.298567] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.308463] posixtimers hash table entries: 4096 (order: 4, 65536 bytes, linear)
[ 0.316070] futex hash table entries: 2048 (131072 bytes on 1 NUMA nodes, total 128 KiB, linear).
[ 0.326104] 23456 pages in range for non-PLT usage
[ 0.326108] 514976 pages in range for PLT usage
[ 0.337391] DMI not present or invalid.
[ 0.342859] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.349826] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[ 0.357223] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.365387] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.373523] audit: initializing netlink subsys (disabled)
[ 0.379149] audit: type=2000 audit(0.248:1): state=initialized audit_enabled=0 res=1
[ 0.388747] thermal_sys: Registered thermal governor 'fair_share'
[ 0.394954] cpuidle: using governor ladder
[ 0.399123] cpuidle: using governor menu
[ 0.403378] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.410380] ASID allocator initialised with 65536 entries
[ 0.417276] Serial: AMBA PL011 UART driver
[ 0.435258] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.442129] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page
[ 0.448465] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages
[ 0.455335] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page
[ 0.461669] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.468528] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.474860] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages
[ 0.481719] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page
[ 0.489671] ACPI: Interpreter disabled.
[ 0.494259] iommu: Default domain type: Translated
[ 0.499108] iommu: DMA domain TLB invalidation policy: strict mode
[ 0.505859] SCSI subsystem initialized
[ 0.510128] usbcore: registered new interface driver usbfs
[ 0.515702] usbcore: registered new interface driver hub
[ 0.521098] usbcore: registered new device driver usb
[ 0.526427] mc: Linux media interface: v0.10
[ 0.530799] videodev: Linux video capture interface: v2.00
[ 0.536399] pps_core: LinuxPPS API ver. 1 registered
[ 0.541416] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.550672] PTP clock support registered
[ 0.555396] Advanced Linux Sound Architecture Driver Initialized.
[ 0.562400] Bluetooth: Core ver 2.22
[ 0.566032] NET: Registered PF_BLUETOOTH protocol family
[ 0.571400] Bluetooth: HCI device and connection manager initialized
[ 0.577829] Bluetooth: HCI socket layer initialized
[ 0.582760] Bluetooth: L2CAP socket layer initialized
[ 0.587872] Bluetooth: SCO socket layer initialized
[ 0.593200] vgaarb: loaded
[ 0.596323] clocksource: Switched to clocksource arch_sys_counter
[ 0.602967] VFS: Disk quotas dquot_6.6.0
[ 0.606948] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.614490] pnp: PnP ACPI: disabled
[ 0.618804] NET: Registered PF_INET protocol family
[ 0.623952] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.635077] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[ 0.643780] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.651629] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.659936] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[ 0.668823] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.675567] UDP hash table entries: 4096 (order: 6, 262144 bytes, linear)
[ 0.682604] UDP-Lite hash table entries: 4096 (order: 6, 262144 bytes, linear)
[ 0.690302] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.696799] PCI: CLS 0 bytes, default 64
[ 0.704778] kvm [1]: nv: 568 coarse grained trap handlers
[ 0.710667] kvm [1]: IPA Size Limit: 40 bits
[ 0.716470] kvm [1]: vgic interrupt IRQ9
[ 0.720466] kvm [1]: Hyp nVHE mode initialized successfully
[ 0.727914] Initialise system trusted keyrings
[ 0.732609] workingset: timestamp_bits=46 max_order=21 bucket_order=0
[ 0.739646] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.745642] fuse: init (API version 7.45)
[ 0.749808] 9p: Installing v9fs 9p2000 file system support
[ 0.756277] cryptd: max_cpu_qlen set to 1000
[ 0.788369] Key type asymmetric registered
[ 0.792526] Asymmetric key parser 'x509' registered
[ 0.797557] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[ 0.805055] io scheduler mq-deadline registered
[ 0.809650] io scheduler kyber registered
[ 0.813752] io scheduler bfq registered
[ 0.820824] pinctrl-single e896c000.pinmux: 459 pins, size 1836
[ 0.827621] pinctrl-single fff11000.pinmux: 463 pins, size 1852
[ 0.834116] pinctrl-single e896c800.pinmux: 459 pins, size 1836
[ 0.840410] pinctrl-single fc182000.pinmux: 10 pins, size 40
[ 0.846297] pinctrl-single fc182800.pinmux: 10 pins, size 40
[ 0.852185] pinctrl-single ff37e000.pinmux: 12 pins, size 48
[ 0.858070] pinctrl-single ff37e800.pinmux: 12 pins, size 48
[ 0.864359] pinctrl-single fff11800.pinmux: 463 pins, size 1852
[ 0.873275] pl061_gpio e8a0b000.gpio: PL061 GPIO chip registered
[ 0.879672] pl061_gpio e8a0c000.gpio: PL061 GPIO chip registered
[ 0.886048] pl061_gpio e8a0d000.gpio: PL061 GPIO chip registered
[ 0.892431] pl061_gpio e8a0e000.gpio: PL061 GPIO chip registered
[ 0.898805] pl061_gpio e8a0f000.gpio: PL061 GPIO chip registered
[ 0.905188] pl061_gpio e8a10000.gpio: PL061 GPIO chip registered
[ 0.911677] pl061_gpio e8a11000.gpio: PL061 GPIO chip registered
[ 0.918058] pl061_gpio e8a12000.gpio: PL061 GPIO chip registered
[ 0.924456] pl061_gpio e8a13000.gpio: PL061 GPIO chip registered
[ 0.930834] pl061_gpio e8a14000.gpio: PL061 GPIO chip registered
[ 0.937214] pl061_gpio e8a15000.gpio: PL061 GPIO chip registered
[ 0.943598] pl061_gpio e8a16000.gpio: PL061 GPIO chip registered
[ 0.949982] pl061_gpio e8a17000.gpio: PL061 GPIO chip registered
[ 0.956366] pl061_gpio e8a18000.gpio: PL061 GPIO chip registered
[ 0.962741] pl061_gpio e8a19000.gpio: PL061 GPIO chip registered
[ 0.969119] pl061_gpio e8a1a000.gpio: PL061 GPIO chip registered
[ 0.975510] pl061_gpio e8a1b000.gpio: PL061 GPIO chip registered
[ 0.981895] pl061_gpio e8a1c000.gpio: PL061 GPIO chip registered
[ 0.988278] pl061_gpio fff28000.gpio: PL061 GPIO chip registered
[ 0.994649] pl061_gpio fff29000.gpio: PL061 GPIO chip registered
[ 1.001030] pl061_gpio e8a1f000.gpio: PL061 GPIO chip registered
[ 1.007411] pl061_gpio e8a20000.gpio: PL061 GPIO chip registered
[ 1.013837] pl061_gpio fff0b000.gpio: PL061 GPIO chip registered
[ 1.020227] pl061_gpio fff0c000.gpio: PL061 GPIO chip registered
[ 1.026618] pl061_gpio fff0d000.gpio: PL061 GPIO chip registered
[ 1.033073] pl061_gpio fff0e000.gpio: PL061 GPIO chip registered
[ 1.039456] pl061_gpio fff0f000.gpio: PL061 GPIO chip registered
[ 1.045846] pl061_gpio fff10000.gpio: PL061 GPIO chip registered
[ 1.052229] pl061_gpio fff1d000.gpio: PL061 GPIO chip registered
[ 1.059105] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.081323] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.089868] msm_serial: driver initialized
[ 1.094128] SuperH (H)SCI(F) driver initialized
[ 1.105513] brd: module loaded
[ 1.113191] loop: module loaded
[ 1.120252] tun: Universal TUN/TAP device driver, 1.6
[ 1.125575] CAN device driver interface
[ 1.130058] e1000e: Intel(R) PRO/1000 Network Driver
[ 1.135086] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 1.141126] igb: Intel(R) Gigabit Ethernet Network Driver
[ 1.146581] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 1.152270] igbvf: Intel(R) Gigabit Virtual Function Network Driver
[ 1.158605] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[ 1.164664] sky2: driver version 1.30
[ 1.168626] PPP generic driver version 2.4.2
[ 1.173084] PPP BSD Compression module registered
[ 1.177868] PPP Deflate Compression module registered
[ 1.182989] PPP MPPE Compression module registered
[ 1.188010] usbcore: registered new interface driver asix
[ 1.193518] usbcore: registered new interface driver ax88179_178a
[ 1.199726] usbcore: registered new interface driver cdc_ether
[ 1.205674] usbcore: registered new interface driver net1080
[ 1.211446] usbcore: registered new interface driver cdc_subset
[ 1.217484] usbcore: registered new interface driver zaurus
[ 1.223183] usbcore: registered new interface driver cdc_ncm
[ 1.229133] VFIO - User Level meta-driver version: 0.3
[ 1.236567] usbcore: registered new interface driver usb-storage
[ 1.243745] mousedev: PS/2 mouse device common for all mice
[ 1.249533] usbcore: registered new interface driver xpad
[ 1.255045] usbcore: registered new interface driver usb_acecad
[ 1.261081] usbcore: registered new interface driver aiptek
[ 1.266766] usbcore: registered new interface driver hanwang
[ 1.272535] usbcore: registered new interface driver kbtab
[ 1.278967] i2c_dev: i2c /dev entries driver
[ 1.283959] usbcore: registered new interface driver uvcvideo
[ 1.290858] device-mapper: uevent: version 1.0.3
[ 1.295650] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: dm-devel@lists.linux.dev
[ 1.304772] Bluetooth: HCI UART driver ver 2.3
[ 1.309268] Bluetooth: HCI UART protocol H4 registered
[ 1.314835] sdhci: Secure Digital Host Controller Interface driver
[ 1.321098] sdhci: Copyright(c) Pierre Ossman
[ 1.325615] Synopsys Designware Multimedia Card Interface Driver
[ 1.332068] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.332166] dwmmc_k3 ff37f000.dwmmc1: fifo-depth property not found, using value of FIFOTH register as default
[ 1.348302] ufshcd-hisi ff3c0000.ufs: ufshcd_populate_vreg: Unable to find vdd-hba-supply regulator, assuming enabled
[ 1.350105] dwmmc_k3 ff37f000.dwmmc1: IDMAC supports 64-bit address mode.
[ 1.359034] ufshcd-hisi ff3c0000.ufs: ufshcd_populate_vreg: Unable to find vcc-supply regulator, assuming enabled
[ 1.365895] dwmmc_k3 ff37f000.dwmmc1: Using internal DMA controller.
[ 1.376256] ufshcd-hisi ff3c0000.ufs: ufshcd_populate_vreg: Unable to find vccq-supply regulator, assuming enabled
[ 1.382671] dwmmc_k3 ff37f000.dwmmc1: Version ID is 270a
[ 1.393127] ufshcd-hisi ff3c0000.ufs: ufshcd_populate_vreg: Unable to find vccq2-supply regulator, assuming enabled
[ 1.398510] dwmmc_k3 ff37f000.dwmmc1: DW MMC controller at irq 43,32 bit host data width,256 deep fifo
[ 1.409041] ufshcd-hisi ff3c0000.ufs: invalid ref_clk setting = 3200000
[ 1.425289] dwmmc_k3 ff37f000.dwmmc1: Got CD GPIO
[ 1.445070] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[ 1.455862] scsi host0: ufshcd
[ 1.467093] uuuuuuuuuuuuuuuuuuuuuuu dw_mci_probe: 0
[ 1.615291] scsi 0:0:0:49488: Well-known LUN SAMSUNG KLUCG4J1ED-B0C1 0300 PQ: 0 ANSI: 6
[ 1.624204] hid: raw HID events driver (C) Jiri Kosina
[ 1.629792] scsi 0:0:0:49476: Well-known LUN SAMSUNG KLUCG4J1ED-B0C1 0300 PQ: 0 ANSI: 6
[ 1.639671] scsi 0:0:0:49456: Well-known LUN SAMSUNG KLUCG4J1ED-B0C1 0300 PQ: 0 ANSI: 6
[ 1.649645] scsi 0:0:0:0: Direct-Access SAMSUNG KLUCG4J1ED-B0C1 0300 PQ: 0 ANSI: 6
[ 1.658289] usbcore: registered new interface driver usbhid
[ 1.659107] mmc_host mmc0: Bus speed (slot 0) = 150000000Hz (slot req 200000000Hz, actual 150000000HZ div = 0)
[ 1.663921] usbhid: USB HID core driver
[ 1.678040] sd 0:0:0:0: [sda] 1024 4096-byte logical blocks: (4.19 MB/4.00 MiB)
[ 1.678096] scsi 0:0:0:1: Direct-Access SAMSUNG KLUCG4J1ED-B0C1 0300 PQ: 0 ANSI: 6
[ 1.679381] sd 0:0:0:1: [sdb] 1024 4096-byte logical blocks: (4.19 MB/4.00 MiB)
[ 1.679442] sd 0:0:0:1: [sdb] Write Protect is off
[ 1.679555] sd 0:0:0:1: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ 1.679604] sd 0:0:0:1: [sdb] Preferred minimum I/O size 8192 bytes
[ 1.679611] sd 0:0:0:1: [sdb] Optimal transfer size 8192 bytes
[ 1.685491] sd 0:0:0:0: [sda] Write Protect is off
[ 1.693843] scsi 0:0:0:2: Direct-Access SAMSUNG KLUCG4J1ED-B0C1 0300 PQ: 0 ANSI: 6
[ 1.695150] sd 0:0:0:2: [sdc] 2048 4096-byte logical blocks: (8.39 MB/8.00 MiB)
[ 1.695206] sd 0:0:0:2: [sdc] Write Protect is off
[ 1.695306] sd 0:0:0:2: [sdc] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ 1.695352] sd 0:0:0:2: [sdc] Preferred minimum I/O size 8192 bytes
[ 1.695356] sd 0:0:0:2: [sdc] Optimal transfer size 8192 bytes
[ 1.714570] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ 1.714645] scsi 0:0:0:3: Direct-Access SAMSUNG KLUCG4J1ED-B0C1 0300 PQ: 0 ANSI: 6
[ 1.715961] sd 0:0:0:3: [sdd] 15616000 4096-byte logical blocks: (64.0 GB/59.6 GiB)
[ 1.716015] sd 0:0:0:3: [sdd] Write Protect is off
[ 1.716115] sd 0:0:0:3: [sdd] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ 1.716158] sd 0:0:0:3: [sdd] Preferred minimum I/O size 8192 bytes
[ 1.716162] sd 0:0:0:3: [sdd] Optimal transfer size 8192 bytes
[ 1.726748] sd 0:0:0:0: [sda] Preferred minimum I/O size 8192 bytes
[ 1.739720] sd 0:0:0:0: [sda] Optimal transfer size 8192 bytes
[ 1.767186] sd 0:0:0:1: [sdb] Attached SCSI disk
[ 1.797501] sd 0:0:0:2: [sdc] Attached SCSI disk
[ 1.799012] GPT:Primary header thinks Alt. header is not at the end of the disk.
[ 1.799015] GPT:7805956 != 15615999
[ 1.799017] GPT:Alternate GPT header not at the end of the disk.
[ 1.799019] GPT:7805956 != 15615999
[ 1.799020] GPT: Use GNU Parted to correct GPT errors.
[ 1.799036] sdd: sdd1 sdd2 sdd3 sdd4 sdd5 sdd6 sdd7 sdd8 sdd9 sdd10 sdd11 sdd12 sdd13 sdd14 sdd15
[ 1.799792] sd 0:0:0:3: [sdd] Attached SCSI disk
[ 1.800621] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.889582] u32 classifier
[ 1.892307] input device check on
[ 1.896038] Actions configured
[ 1.900744] xt_time: kernel timezone is -0000
[ 1.905308] Initializing XFRM netlink socket
[ 1.909657] NET: Registered PF_INET6 protocol family
[ 1.915056] Segment Routing with IPv6
[ 1.918770] In-situ OAM (IOAM) with IPv6
[ 1.922823] mip6: Mobile IPv6
[ 1.925853] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 1.932086] NET: Registered PF_PACKET protocol family
[ 1.937197] PFKEY is deprecated and scheduled to be removed in 2027, please contact the netdev mailing list
[ 1.947042] NET: Registered PF_KEY protocol family
[ 1.951886] can: controller area network core
[ 1.956296] NET: Registered PF_CAN protocol family
[ 1.961142] can: raw protocol
[ 1.964140] can: broadcast manager protocol
[ 1.968372] can: netlink gateway - max_hops=1
[ 1.972838] Bluetooth: RFCOMM TTY layer initialized
[ 1.977767] Bluetooth: RFCOMM socket layer initialized
[ 1.982960] Bluetooth: RFCOMM ver 1.11
[ 1.986752] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 1.992744] Bluetooth: HIDP socket layer initialized
[ 1.997834] 9pnet: Installing 9P2000 support
[ 2.008032] registered taskstats version 1
[ 2.012203] Loading compiled-in X.509 certificates
[ 2.028623] fdf02000.serial: ttyAMA0 at MMIO 0xfdf02000 (irq = 46, base_baud = 0) is a PL011 rev2
[ 2.038204] fdf03000.serial: ttyAMA2 at MMIO 0xfdf03000 (irq = 47, base_baud = 0) is a PL011 rev2
[ 2.048291] fff32000.serial: ttyAMA6 at MMIO 0xfff32000 (irq = 48, base_baud = 0) is a PL011 rev2
[ 2.057469] printk: console [ttyAMA6] enabled
[ 2.057469] printk: console [ttyAMA6] enabled
[ 2.066277] printk: legacy bootconsole [pl11] disabled
[ 2.066277] printk: legacy bootconsole [pl11] disabled
[ 2.084505] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 2.084910] dwmmc_k3 fc183000.dwmmc2: fifo-depth property not found, using value of FIFOTH register as default
[ 2.085172] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 2.085503] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
[ 2.085547] faux_driver regulatory: Direct firmware load for regulatory.db failed with error -2
[ 2.085553] cfg80211: failed to load regulatory.db
[ 2.085683] clk: Not disabling unused clocks
[ 2.085695] PM: genpd: Disabling unused power domains
[ 2.085732] ALSA device list:
[ 2.085733] No soundcards found.
[ 2.087099] dwmmc_k3 fc183000.dwmmc2: IDMAC supports 64-bit address mode.
[ 2.087128] dwmmc_k3 fc183000.dwmmc2: Using internal DMA controller.
[ 2.087135] dwmmc_k3 fc183000.dwmmc2: Version ID is 270a
[ 2.087186] dwmmc_k3 fc183000.dwmmc2: DW MMC controller at irq 49,32 bit host data width,256 deep fifo
[ 2.087496] mmc_host mmc1: card is non-removable.
[ 2.128637] check access for rdinit=/init failed: -2, ignoring
[ 2.149591] dwmmc_k3 ff37f000.dwmmc1: tuning ok best_clksmpl 11 tuning_sample_flag bff7fff7
[ 2.149605] mmc0: new UHS-I speed SDR104 SDHC card at address aaaa
[ 2.151153] mmcblk0: mmc0:aaaa SC16G 14.8 GiB
[ 2.153515] mmcblk0: p1 p2
[ 2.174382] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[ 2.186982] uuuuuuuuuuuuuuuuuuuuuuu dw_mci_probe: 0
[ 2.193854] dwmmc_k3 fc183000.dwmmc2: card claims to support voltages below defined range
[ 2.204323] mmc_host mmc1: Bus speed (slot 0) = 25000000Hz (slot req 25000000Hz, actual 25000000HZ div = 0)
[ 2.205877] mmc1: new SDIO card at address 0001
[ 2.207098] wl18xx_driver wl18xx.0.auto: Direct firmware load for ti-connectivity/wl1271-nvs.bin failed with error -2
[ 2.207129] wl18xx_driver wl18xx.0.auto: Direct firmware load for ti-connectivity/wl18xx-conf.bin failed with error -2
[ 2.207135] wlcore: ERROR could not get configuration binary ti-connectivity/wl18xx-conf.bin: -2
[ 2.207139] wlcore: WARNING falling back to default config
[ 2.322391] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[ 2.353207] mmc_host mmc1: Bus speed (slot 0) = 25000000Hz (slot req 25000000Hz, actual 25000000HZ div = 0)
[ 2.442902] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[ 2.473716] mmc_host mmc1: Bus speed (slot 0) = 25000000Hz (slot req 25000000Hz, actual 25000000HZ div = 0)
[ 2.676778] wlcore: wl18xx HW: 183x or 180x, PG 2.2 (ROM 0x11)
[ 2.679371] wlcore: loaded
[ 2.728006] EXT4-fs (mmcblk0p2): recovery complete
[ 2.728835] EXT4-fs (mmcblk0p2): mounted filesystem dd2b6244-c0dc-4cec-83eb-9bb736c3fda2 r/w with ordered data mode. Quota mode: none.
[ 2.728893] VFS: Mounted root (ext4 filesystem) on device 179:2.
[ 2.730024] devtmpfs: mounted
[ 2.731767] Freeing unused kernel memory: 8384K
[ 2.731829] Run /sbin/init as init process
SELinux: Could not open policy file <= /etc/selinux/targeted/policy/policy.35: No such file or directory
[ 2.964290] systemd[1]: System time before build time, advancing clock.
[ 2.981437] systemd[1]: Failed to find module 'autofs4'
[ 3.028577] systemd[1]: systemd 252.39-1~deb12u1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +I
DN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
[ 3.028595] systemd[1]: Detected architecture arm64.
Welcome to Debian GNU/Linux 12 (bookworm)!
[ 3.076021] systemd[1]: Hostname set to <hikey970>.
[ OK ] Created slice system-getty.slice - Slice /system/getty.
[ OK ] Created slice system-modpr…lice - Slice /system/modprobe.
[ OK ] Created slice system-seria… - Slice /system/serial-getty.
[ OK ] Created slice system-wpa_s…0m - Slice /system/wpa_supplicant.
[ OK ] Created slice user.slice - User and Session Slice.
[ OK ] Started systemd-ask-passwo…quests to Console Directory Watch.
[ OK ] Started systemd-ask-passwo… Requests to Wall Directory Watch.
Expecting device dev-ttyAMA6.device - /dev/ttyAMA6...
Expecting device sys-subsy…sys/subsystem/net/devices/wlan0...
[ OK ] Reached target cryptsetup.…get - Local Encrypted Volumes.
[ OK ] Reached target integrityse…Local Integrity Protected Volumes.
[ OK ] Reached target paths.target - Path Units.
[ OK ] Reached target remote-fs.target - Remote File Systems.
[ OK ] Reached target slices.target - Slice Units.
[ OK ] Reached target swap.target - Swaps.
[ OK ] Reached target veritysetup… - Local Verity Protected Volumes.
[ OK ] Listening on systemd-initc… initctl Compatibility Named Pipe.
[ OK ] Listening on systemd-journ…socket - Journal Audit Socket.
[ OK ] Listening on systemd-journ…t - Journal Socket (/dev/log).
[ OK ] Listening on systemd-journald.socket - Journal Socket.
[ OK ] Listening on systemd-udevd….socket - udev Control Socket.
[ OK ] Listening on systemd-udevd…l.socket - udev Kernel Socket.
Mounting dev-hugepages.mount - Huge Pages File System...
Mounting dev-mqueue.mountPOSIX Message Queue File System...
Mounting sys-kernel-debug.… - Kernel Debug File System...
Starting modprobe@configfs…m - Load Kernel Module configfs...
Starting modprobe@dm_mod.s…[0m - Load Kernel Module dm_mod...
Starting modprobe@drm.service - Load Kernel Module drm...
Starting modprobe@efi_psto…- Load Kernel Module efi_pstore...
Starting modprobe@fuse.ser…e - Load Kernel Module fuse...
Starting modprobe@loop.ser…e - Load Kernel Module loop...
Starting systemd-journald.service - Journal Service...
Starting systemd-modules-l…rvice - Load Kernel Modules...
Starting systemd-remount-f…nt Root and Kernel File Systems...
Starting systemd-udev-trig…[0m - Coldplug All udev Devices...
[ OK ] Mounted dev-hugepages.mount - Huge Pages File System.
[ OK ] Mounted dev-mqueue.mount- POSIX Message Queue File System.
[ 3.861186] systemd-journald[1644]: /dev/kmsg buffer overrun, some messages lost.
[ OK ] Mounted sys-kernel-debug.m…nt - Kernel Debug File System.
[ OK ] Finished modprobe@configfs…[0m - Load Kernel Module configfs.
[ OK ] Finished modprobe@dm_mod.s…e - Load Kernel Module dm_mod.
[ OK ] Finished modprobe@drm.service - Load Kernel Module drm.
[ OK ] Finished modprobe@efi_psto…m - Load Kernel Module efi_pstore.
[ OK ] Started systemd-journald.service - Journal Service.
[ OK ] Finished modprobe@fuse.service - Load Kernel Module fuse.
[ OK ] Finished modprobe@loop.service - Load Kernel Module loop.
[ OK ] Finished systemd-modules-l…service - Load Kernel Modules.
[ OK ] Finished systemd-remount-f…ount Root and Kernel File Systems.
Mounting sys-fs-fuse-conne… - FUSE Control File System...
Mounting sys-kernel-config…ernel Configuration File System...
Starting systemd-journal-f…h Journal to Persistent Storage...
Starting systemd-random-se…ice - Load/Save Random Seed...
[ 4.062354] systemd-journald[1644]: Received client request to flush runtime journal.
[ 4.063868] systemd-journald[1644]: File /var/log/journal/ca0728defc334c769dd8273b2337687e/system.journal corrupted or uncleanly shut down, renaming and replacing.
Starting systemd-sysctl.se…ce - Apply Kernel Variables...
Starting systemd-sysusers.…rvice - Create System Users...
[ OK ] Finished systemd-udev-trig…e - Coldplug All udev Devices.
[ OK ] Mounted sys-fs-fuse-connec…nt - FUSE Control File System.
[ OK ] Mounted sys-kernel-config.… Kernel Configuration File System.
[ OK ] Finished systemd-journal-f…ush Journal to Persistent Storage.
[ OK ] Finished systemd-sysctl.service - Apply Kernel Variables.
[ OK ] Finished systemd-sysusers.service - Create System Users.
Starting ifupdown-pre.serv…ynchronize boot up for ifupdown...
Starting systemd-tmpfiles-…ate Static Device Nodes in /dev...
[ OK ] Finished ifupdown-pre.serv… synchronize boot up for ifupdown.
[ OK ] Finished systemd-tmpfiles-…reate Static Device Nodes in /dev.
[ OK ] Reached target local-fs-pr…reparation for Local File Systems.
[ OK ] Reached target local-fs.target - Local File Systems.
Starting networking.service - Raise network interfaces...
Starting systemd-tmpfiles-…te System Files and Directories...
Starting systemd-udevd.ser…ger for Device Events and Files...
[ OK ] Finished systemd-tmpfiles-…eate System Files and Directories.
[ OK ] Started haveged.servicemon based on the HAVEGE algorithm.
Starting systemd-update-ut…rd System Boot/Shutdown in UTMP...
[ OK ] Started systemd-udevd.serv…nager for Device Events and Files.
[ OK ] Finished networking.service - Raise network interfaces.
[ OK ] Finished systemd-update-ut…cord System Boot/Shutdown in UTMP.
[ OK ] Reached target sysinit.target - System Initialization.
[ OK ] Started apt-daily.timer - Daily apt download activities.
[ OK ] Started apt-daily-upgrade.… apt upgrade and clean activities.
[ OK ] Started dpkg-db-backup.tim… Daily dpkg database backup timer.
[ OK ] Started e2scrub_all.timeretadata Check for All Filesystems.
[ OK ] Started fstrim.timer - Discard unused blocks once a week.
[ OK ] Started logrotate.timer - Daily rotation of log files.
[ OK ] Started systemd-tmpfiles-c… Cleanup of Temporary Directories.
[ OK ] Reached target timers.target - Timer Units.
[ OK ] Listening on dbus.socket- D-Bus System Message Bus Socket.
[ OK ] Reached target sockets.target - Socket Units.
[ OK ] Reached target basic.target - Basic System.
[ OK ] Started cron.service -…kground program processing daemon.
Starting dbus.service - D-Bus System Message Bus...
Starting dhcpcd.serviceClient Daemon on all interfaces...
[ 4.900677] random: dbus-daemon: uninitialized urandom read (12 bytes read)
Starting e2scrub_reap.serv…e ext4 Metadata Ch[ 4.921455] random: dbus-daemon: uninitialized urandom read (12 bytes read)
eck Snapshots...
[ OK ] Started rngd.service -…t entropy gathering daemon (rngd).
Starting systemd-logind.se…ice - User Login Management...
[ OK ] Started dbus.service - D-Bus System Message Bus.
[ 5.025533] random: dhcpcd: uninitialized urandom read (112 bytes read)
[ OK ] Finished e2scrub_reap.serv…ine ext4 Metadata Check Snapshots.
[ 5.086461] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[ 5.117566] mmc_host mmc1: Bus speed (slot 0) = 25000000Hz (slot req 25000000Hz, actual 25000000HZ div = 0)
[ OK ] Started dhcpcd.service…P Client Daemon on all interfaces.
[ 5.282903] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[ 5.313867] mmc_host mmc1: Bus speed (slot 0) = 25000000Hz (slot req 25000000Hz, actual 25000000HZ div = 0)
[ 5.406889] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[ 5.437806] mmc_host mmc1: Bus speed (slot 0) = 25000000Hz (slot req 25000000Hz, actual 25000000HZ div = 0)
[ OK ] Found device dev-ttyAMA6.device - /dev/ttyAMA6.
[ 5.644419] random: crng init done
[ OK ] Found device sys-subsystem… /sys/subsystem/net/devices/wlan0.
[ OK ] Finished systemd-random-se…rvice - Load/Save Random Seed.
[ OK ] Started systemd-logind.service - User Login Management.
[ 5.738543] wlcore: PHY firmware version: Rev 8.2.0.0.243
Starting wpa_supplicant.service - WPA supplicant...
[ OK ] Started wpa_supplicant@wla…pplicant daemon (interface wlan0).
[ 5.823414] wlcore: firmware booted (Rev 8.9.0.0.83)
[ OK ] Started wpa_supplicant.service - WPA supplicant.
[ OK ] Reached target network.target - Network.
Starting rc-local.servicem - /etc/rc.local Compatibility...
Starting ssh.service - OpenBSD Secure Shell server...
Starting systemd-user-sess…vice - Permit User Sessions...
[ OK ] Started rc-local.service - /etc/rc.local Compatibility.
[ OK ] Finished systemd-user-sess…ervice - Permit User Sessions.
[ OK ] Started serial-getty@ttyAM…ice - Serial Getty on ttyAMA6.
[ OK ] Reached target getty.target - Login Prompts.
[ OK ] Started ssh.service - OpenBSD Secure Shell server.
[ OK ] Reached target multi-user.target - Multi-User System.
[ OK ] Reached target graphical.target - Graphical Interface.
[ OK ] Listening on systemd-rfkil…l Switch Status /dev/rfkill Watch.
Starting systemd-update-ut… Record Runlevel Change in UTMP...
Starting systemd-rfkill.se…Load/Save RF Kill Switch Status...
[ OK ] Finished systemd-update-ut… - Record Runlevel Change in UTMP.
[ OK ] Started systemd-rfkill.ser…- Load/Save RF Kill Switch Status.
Debian GNU/Linux 12 hikey970 ttyAMA6
hikey970 login: [ 10.208687] wlan0: authenticate with 60:3a:7c:52:9c:21 (local address=c8:df:84:51:a3:37)
[ 10.208720] wlan0: send auth to 60:3a:7c:52:9c:21 (try 1/3)
[ 10.248269] wlan0: authenticated
[ 10.252333] wlan0: associate with 60:3a:7c:52:9c:21 (try 1/3)
[ 10.262143] wlan0: RX AssocResp from 60:3a:7c:52:9c:21 (capab=0x1011 status=0 aid=6)
[ 10.267900] wlan0: associated
[ 20.269612] wlan0: deauthenticating from 60:3a:7c:52:9c:21 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 24.612643] wlan0: authenticate with 60:3a:7c:52:9c:21 (local address=c8:df:84:51:a3:37)
[ 24.612676] wlan0: send auth to 60:3a:7c:52:9c:21 (try 1/3)
[ 24.654772] wlan0: authenticated
[ 24.656334] wlan0: associate with 60:3a:7c:52:9c:21 (try 1/3)
[ 24.665797] wlan0: RX AssocResp from 60:3a:7c:52:9c:21 (capab=0x1011 status=0 aid=6)
[ 24.671533] wlan0: associated
[ 24.817159] wlcore: Association completed.
[ 33.956372] ldo3: disabling
[ 33.956423] ldo4: disabling
@lucmann
Copy link
Author

lucmann commented Jan 16, 2026

~ sudo blkid /dev/mmcblk0p1
/dev/mmcblk0p1: LABEL_FATBOOT="BOOT" LABEL="BOOT" UUID="35EA-7379" BLOCK_SIZE="512" TYPE="vfat" PARTUUID="30a7d232-01"~ sudo blkid /dev/mmcblk0p2
/dev/mmcblk0p2: LABEL="rootfs" UUID="dd2b6244-c0dc-4cec-83eb-9bb736c3fda2" BLOCK_SIZE="4096" TYPE="ext4" PARTUUID="30a7d232-02"

@lucmann
Copy link
Author

lucmann commented Jan 16, 2026

hi@hikey970:~$ ls -l /
total 57
lrwxrwxrwx   1 root root     7 Jan  9  2026 bin -> usr/bin
drwxr-xr-x   4 root root  1024 Jan  1  1970 boot
drwxr-xr-x  15 root root  2540 Jun 26 22:58 dev
drwxr-xr-x  60 root root  4096 Jun 26  2025 etc
drwxr-xr-x   3 root root  4096 Jan  9  2026 home
lrwxrwxrwx   1 root root     7 Jan  9  2026 lib -> usr/lib
drwx------   2 root root 16384 Jan 15  2026 lost+found
drwxr-xr-x   2 root root  4096 Jan  9  2026 media
drwxr-xr-x   2 root root  4096 Jan  9  2026 mnt
drwxr-xr-x   2 root root  4096 Jan  9  2026 opt
dr-xr-xr-x 196 root root     0 Jan  1  1970 proc
drwx------   3 root root  4096 Jun 26  2025 root
drwxr-xr-x  15 root root   460 Jun 26 22:58 run
lrwxrwxrwx   1 root root     8 Jan  9  2026 sbin -> usr/sbin
drwxr-xr-x   2 root root  4096 Jan  9  2026 srv
dr-xr-xr-x  13 root root     0 Jan  1  1970 sys
drwxrwxrwt   8 root root  4096 Jun 26 22:58 tmp
drwxr-xr-x  11 root root  4096 Jan  9  2026 usr
drwxr-xr-x  11 root root  4096 Jan  9  2026 var
hi@hikey970:~$ df -h
Filesystem      Size  Used Avail Use% Mounted on
/dev/root        15G  852M   13G   7% /
devtmpfs        2.9G     0  2.9G   0% /dev
tmpfs           2.9G     0  2.9G   0% /dev/shm
tmpfs           1.2G  444K  1.2G   1% /run
tmpfs           5.0M     0  5.0M   0% /run/lock
/dev/mmcblk0p1  253M   42M  211M  17% /boot

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment