Last active
February 8, 2026 03:59
-
-
Save kotarou3/d2cdf50286b96d45c17e3ea39ac2d673 to your computer and use it in GitHub Desktop.
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| # lm-sensors configuration for the Asus Pro WS TRX50-SAGE WIFI motherboard | |
| # | |
| # Recommended drivers: asus-ec-sensors, nct6775, spd5118 | |
| chip "nct6798-isa-0290" | |
| # Voltage labels are from HWiNFO, except Core0/1 and VDD_11_S3 are from the BIOS | |
| label in0 "CPU Core0" | |
| compute in0 @*1.11, @/1.11 | |
| label in1 "+5V" | |
| compute in1 @*5, @/5 | |
| label in2 "AVSB" | |
| label in3 "3VCC" | |
| label in4 "+12V" | |
| compute in4 @*12, @/12 | |
| label in5 "CPU VDDIO" | |
| compute in5 @*1.11, @/1.11 | |
| label in6 "CPU Core1" | |
| compute in6 @*1.11, @/1.11 | |
| label in7 "3VSB" | |
| label in8 "VBAT" | |
| label in9 "VTT" | |
| label in10 "CHIPSET1 1.0V" | |
| label in11 "VDD_11_S3 / MC" | |
| compute in11 @*1.11, @/1.11 | |
| label in12 "VIN2" | |
| label in13 "CPU VSOC" | |
| compute in13 @*1.11, @/1.11 | |
| label in14 "CHIPSET1 1.8V" | |
| compute in14 @*1.11, @/1.11 | |
| label temp1 "Motherboard" | |
| label temp2 "CPU Socket" | |
| ignore temp3 # Produces seemingly garbage values | |
| ignore temp4 # Seems unused: Sits at 23°C regardless of conditions | |
| ignore temp5 # Seems unused: Sits at 26°C regardless of conditions | |
| ignore temp6 # Seems unused: Sits at -9°C regardless of conditions | |
| ignore temp7 # Seems unused: Sits at 26°C regardless of conditions | |
| # temp8~12 are "virtual" sensors configured by the BIOS depending on the | |
| # temperature sources used for PWM fan control. Typically they are just | |
| # copied over from the EC sensors. | |
| # Using the EC sensors (asusec) directly will be more reliable than these | |
| ignore temp8 | |
| ignore temp9 | |
| ignore temp10 | |
| ignore temp11 | |
| ignore temp12 | |
| label temp13 "CPU Tctl" | |
| label fan1 "CHA_FAN1" | |
| label fan2 "CPU_FAN" | |
| label fan3 "CHA_FAN2" | |
| label fan4 "CHA_FAN3" | |
| label fan5 "CHA_FAN4" | |
| label fan6 "W_PUMP+" | |
| # Needs https://github.com/hramrach/lm-sensors/pull/12 to not have wrong values | |
| label pwm1 "CHA_FAN1" | |
| label pwm2 "CPU_FAN" | |
| label pwm3 "CHA_FAN2" | |
| label pwm4 "CHA_FAN3" | |
| label pwm5 "CHA_FAN4" | |
| label pwm6 "W_PUMP+" | |
| # spd5118 does not autodetect these sensors, so they have to be added manually | |
| # each boot with: | |
| # # echo spd5118 0x50 > /sys/bus/i2c/devices/i2c-0/new_device | |
| # # echo spd5118 0x52 > /sys/bus/i2c/devices/i2c-0/new_device | |
| # # echo spd5118 0x50 > /sys/bus/i2c/devices/i2c-1/new_device | |
| # # echo spd5118 0x52 > /sys/bus/i2c/devices/i2c-1/new_device | |
| # Also needs https://github.com/hramrach/lm-sensors/pull/11 to parse correctly | |
| chip "spd5118-i2c-0-50" # Path: /sys/devices/platform/AMDI0010:01/i2c-0 | |
| label temp1 "DIMM_E1" | |
| chip "spd5118-i2c-0-52" | |
| label temp1 "DIMM_G1" | |
| chip "spd5118-i2c-1-50" # Path: /sys/devices/platform/AMDI0010:02/i2c-1 | |
| label temp1 "DIMM_A1" | |
| chip "spd5118-i2c-1-52" | |
| label temp1 "DIMM_C1" |
Author
Yea I get the same issue with the DIMM sensors where sometimes only a subset loads properly. Investigating why hasn't been a priority though, since generally all of my DIMMs hover around the same temperature so just having 1 working is sufficient for me
I also did experience a related issue where the DIMM sensor values would occasionally report unrealistic values before reverting back to normal, which I reported to the hwmon mailing list here: https://lore.kernel.org/linux-hwmon/CACsxjPbcjDPLVfnVncumKVAL16fgBXr4kUGbH4hW+cZiJTe_0w@mail.gmail.com/T/#u
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Just received my ASUS Pro WS TRX50-SAGE WIFI A and testing it out with Fedora.
I can verify that the A variant uses the nct6799. Reading the DIMMS with spd5118 is a bit hit and miss. I do not get all four and they don't always load the same. Experience that three came up, now only two after a boot.
A bit annoying those error for Kingston Fury G5 SSDs. Not related to this project.
Any way I can help more, I will.