marshalhayes

<Project ToolsVersion="15.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
  <!-- This file exposes the following parameters -->
  <!-- TailwindVersion: The version of the Tailwind Standalone CLI to download. -->
  <!-- TailwindDownloadPath: The path to where to download the Tailwind Standalone CLI. This property is optional, and defaults to %LOCALAPPDATA% on Windows, and $XDG_CACHE_HOME on Linux and MacOS. -->
  <!-- TailwindInputStyleSheetPath: The path to the input stylesheet. -->
  <!-- TailwindOutputStyleSheetPath: The path to the output stylesheet. -->
  <!-- TailwindOptimizeOutputStyleSheet: Whether to optimize the output stylesheet. This property is optional, and defaults to false. -->
  <!-- TailwindMinifyOutputStyleSheet: Whether to minify the output stylesheet. This property is optional, and defaults to false when Configuration is Debug, and true when Configuration is Release. -->
  <!-- TailwindGenerateSourceMap: Whether to generate a source map for the output stylesheet. This prope

ehsan18t

Enable Processor Boost Mode Control in Windows

Disable Turbo Boost to Reduce Power Consumption and Heat

Why Do We Need It?

If your laptop’s CPU is running very hot and you’ve tried to undervolt it, you’ve probably discovered there’s no easy way to do so—especially on laptops whose BIOS doesn’t expose those controls. I ran into the same issue with my Ryzen 7 5800H, despite numerous attempts, I couldn’t undervolt because the firmware simply wouldn’t allow it. While it may seem drastic, disabling Turbo Boost is one workaround—and you might be surprised how little real-world performance you lose by turning it off.

codeniko

Setup Raspbian Buster

I'm using debian 10 as my daily so these are *nix commands. Mac should work with these too but you're on your own if you're using Windows. Goal for me is to make a headless raspberry pi I can SSH into and connect to my network using Ethernet. You should be comfortable in command line if you choose to follow this guide.

1. Go to https://www.raspberrypi.org/downloads/raspbian and download Raspbian lite archive
2. unzip the image
3. Plug in sdcard. Run lsblk to see drives and mount points. Likely, the sdcard will show up in /dev/sda or /dev/sdb and may have some partitions like /dev/sda1 and /dev/sda2.
4. If partitions are mounted, unmount all of them. Ex: umount /dev/sda1 and umount /dev/sda2
5. Copy the raspbian image to the sdcard with sudo dd if=RASPBIAN_IMAGE_FILE.img of=/dev/sda bs=4M
6. Run sync to ensure the written contents are flushed
7. OPTIONAL: To start ssh server on boot, Unplug sdcard and reinsert to remount new partitions. You'll have two with raspbian.

xavierfoucrier

GPG signing –

Here is a short guide that will help you setup your environment to create signed commits or signed tags with Git locally. This has been extensively tested on Windows with Git and the Github Desktop application: I use it every day for my professional development projects.

I you face any issue, feel free to leave a comment below.

Summary

1. Sign commits or tags
2. Key passphrase
3. Disable signatures
4. Renew a GPG key