Skip to content

Instantly share code, notes, and snippets.

View hxreborn's full-sized avatar
:shipit:

rafareborn hxreborn

:shipit:
26 followers · 26 following
  • Self-hosted
  • Schrödinger’s Desk
  • 00:15 (UTC +01:00)
View GitHub Profile
@TheUnrealZaka
TheUnrealZaka / HidingRoot.md
Last active December 11, 2025 10:01
This guide is for all Android devices to hide properly all root detections and successfully run banking apps as expected :)

✨ Welcome to TheUnrealZaka's Guide for Hiding Root Detections!

Using KernelSU-Next + SuSFS

⚠️ Disclaimer: This guide is provided solely for educational purposes. The creator assumes no responsibility for any damage, data loss, or other adverse effects that may occur as a result of following these instructions. Proceed entirely at your own risk!

📖 Introduction

Many users who have rooted their devices finds issues where system or third-party applications detect the root status and refuse to operate. This guide outlines a procedure to hide root detection on the majority of Android devices, specifically the ones running Noble ROM for Samsung S9/S9+/N9. The approach detailed here leverages KernelSU-Next in conjunction with SuSFS.

@MuhammadSaim
MuhammadSaim / rarreg.key
Last active December 11, 2025 12:47
Step 1: Create a file called rarreg.key Step 2: Paste into the file the raw content of this gist Step 3: Go to Winrar install directory (by default => c:\ProgramFiles\WinRAR\ ) Step 4: Paste the rarreg.key into WinRAR directory Step 5: Enjoy
RAR registration data
WinRAR
Unlimited Company License
UID=4b914fb772c8376bf571
6412212250f5711ad072cf351cfa39e2851192daf8a362681bbb1d
cd48da1d14d995f0bbf960fce6cb5ffde62890079861be57638717
7131ced835ed65cc743d9777f2ea71a8e32c7e593cf66794343565
b41bcf56929486b8bcdac33d50ecf773996052598f1f556defffbd
982fbe71e93df6b6346c37a3890f3c7edc65d7f5455470d13d1190
6e6fb824bcf25f155547b5fc41901ad58c0992f570be1cf5608ba9
@nealfennimore
nealfennimore / wireguard.conf
Last active September 9, 2025 19:22
Wireguard VPN - Forward all traffic to server
# ------------------------------------------------
# Config files are located in /etc/wireguard/wg0
# ------------------------------------------------
# ---------- Server Config ----------
[Interface]
Address = 10.10.0.1/24 # IPV4 CIDR
Address = fd86:ea04:1111::1/64 # IPV6 CIDR
PostUp = iptables -A FORWARD -i wg0 -j ACCEPT; iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE; ip6tables -A FORWARD -i wg0 -j ACCEPT; ip6tables -t nat -A POSTROUTING -o eth0 -j MASQUERADE # Add forwarding when VPN is started
PostDown = iptables -D FORWARD -i wg0 -j ACCEPT; iptables -t nat -D POSTROUTING -o eth0 -j MASQUERADE; ip6tables -D FORWARD -i wg0 -j ACCEPT; ip6tables -t nat -D POSTROUTING -o eth0 -j MASQUERADE # Remove forwarding when VPN is shutdown