HA HVAC Pause Blueprint V2

hvac_pause.yaml

#ver. 2.0.0
blueprint:
  name: HVAC Pause V2.0.0
  description: Pauses HVAC when windows/doors open; resumes full previous state once closed (with wait-for-confirmed state)
  domain: automation
  input:
    climate_device:
      name: Climate Device
      description: Climate entity used for climate control.
      selector:
        entity:
          domain: [climate]
    doors_windows:
      name: Door and Window Sensors
      description: Group of entities that trigger pause when opened. ('on' = open)
      selector:
        entity:
          domain: [group, binary_sensor]
    pause_delay:
      name: Pause Delay
      description: Time to wait before pausing the HVAC system.
      default:
        hours: 0
        minutes: 5
        seconds: 0
      selector:
        duration: {}
    resume_delay:
      name: Resume Delay
      description: Time to wait before resuming the HVAC system.
      default:
        hours: 0
        minutes: 0
        seconds: 30
      selector:
        duration: {}
    timeout:
      name: Timeout (optional)
      description: If set, HVAC will remain off if window/door stays open. Set to 0 to disable.
      default:
        hours: 0
        minutes: 0
        seconds: 0
      selector:
        duration: {}
    action_first:
      name: Action First
      description: Run pause actions before pausing HVAC?
      selector:
        boolean: {}
    pause_action:
      name: Pause Action (Optional)
      default: []
      selector:
        action: {}
    resume_action:
      name: Resume Action (Optional)
      default: []
      selector:
        action: {}
    timeout_action:
      name: Timeout Action (Optional)
      default: []
      selector:
        action: {}

mode: single

variables:
  action_first: !input action_first
  pause_action: !input pause_action
  resume_action: !input resume_action
  timeout_action: !input timeout_action
  climate_device: !input climate_device
  doors_windows: !input doors_windows
  timeout: !input timeout
  timeout_empty: {"hours": 0, "minutes": 0, "seconds": 0}

trigger:
  - platform: state
    entity_id: !input doors_windows
    from: "off"
    to: "on"
    for: !input pause_delay
    id: group_open

condition:
  - condition: not
    conditions:
      - condition: state
        entity_id: !input climate_device
        state: "off"

action:
  - variables:
      hvac_mode_prev: "{{ states(climate_device) }}"
      temperature_prev: "{{ state_attr(climate_device, 'temperature') }}"
      preset_mode_prev: "{{ state_attr(climate_device, 'preset_mode') }}"
      fan_mode_prev: "{{ state_attr(climate_device, 'fan_mode') }}"
      swing_mode_prev: "{{ state_attr(climate_device, 'swing_mode') }}"
      temp_low_prev: "{{ state_attr(climate_device, 'target_temp_low') }}"
      temp_high_prev: "{{ state_attr(climate_device, 'target_temp_high') }}"

  - choose:
      - conditions: "{{ pause_action | length > 0 and action_first == true }}"
        sequence: !input pause_action

  - service: climate.set_hvac_mode
    data:
      hvac_mode: "off"
    target:
      entity_id: !input climate_device

  - choose:
      - conditions: "{{ pause_action | length > 0 and action_first != true }}"
        sequence: !input pause_action

  - if:
      - condition: template
        value_template: "{{ timeout != timeout_empty }}"
    then:
      - wait_for_trigger:
          - platform: state
            entity_id: !input doors_windows
            from: "on"
            to: "off"
            for: !input resume_delay
        continue_on_timeout: true
        timeout: !input timeout
      - if:
          - condition: template
            value_template: "{{ wait.trigger == none }}"
        then:
          - if:
              - condition: template
                value_template: "{{ timeout_action | length > 0 }}"
            then:
              - sequence: !input timeout_action
          - stop: ""
    else:
      - wait_for_trigger:
          - platform: state
            entity_id: !input doors_windows
            from: "on"
            to: "off"
            for: !input resume_delay
        continue_on_timeout: false

  - condition: state
    entity_id: !input climate_device
    state: "off"

  - service: climate.set_hvac_mode
    data:
      hvac_mode: "{{ hvac_mode_prev }}"
    target:
      entity_id: !input climate_device

  - wait_for_trigger:
      - platform: state
        entity_id: !input climate_device
        from: "off"
    timeout: "00:00:30"
    continue_on_timeout: true

  - choose:
      - conditions: "{{ temperature_prev is number and temperature_prev != state_attr(climate_device, 'temperature') }}"
        sequence:
          - service: climate.set_temperature
            data:
              temperature: "{{ temperature_prev }}"
            target:
              entity_id: !input climate_device
          - wait_for_trigger:
              - platform: template
                value_template: "{{ state_attr(climate_device, 'temperature') == temperature_prev }}"
            timeout: "00:00:15"
            continue_on_timeout: true

  - choose:
      - conditions: "{{ temp_low_prev is number and temp_high_prev is number and (temp_low_prev != state_attr(climate_device, 'target_temp_low') or temp_high_prev != state_attr(climate_device, 'target_temp_high')) }}"
        sequence:
          - service: climate.set_temperature
            data:
              target_temp_low: "{{ temp_low_prev }}"
              target_temp_high: "{{ temp_high_prev }}"
            target:
              entity_id: !input climate_device
          - wait_for_trigger:
              - platform: template
                value_template: >
                  {{ state_attr(climate_device, 'target_temp_low') == temp_low_prev and
                     state_attr(climate_device, 'target_temp_high') == temp_high_prev }}
            timeout: "00:00:15"
            continue_on_timeout: true

  - choose:
      - conditions: "{{ preset_mode_prev is string and preset_mode_prev != state_attr(climate_device, 'preset_mode') }}"
        sequence:
          - service: climate.set_preset_mode
            data:
              preset_mode: "{{ preset_mode_prev }}"
            target:
              entity_id: !input climate_device
          - wait_for_trigger:
              - platform: template
                value_template: "{{ state_attr(climate_device, 'preset_mode') == preset_mode_prev }}"
            timeout: "00:00:15"
            continue_on_timeout: true

  - choose:
      - conditions: "{{ fan_mode_prev is string and fan_mode_prev != state_attr(climate_device, 'fan_mode') }}"
        sequence:
          - service: climate.set_fan_mode
            data:
              fan_mode: "{{ fan_mode_prev }}"
            target:
              entity_id: !input climate_device
          - wait_for_trigger:
              - platform: template
                value_template: "{{ state_attr(climate_device, 'fan_mode') == fan_mode_prev }}"
            timeout: "00:00:15"
            continue_on_timeout: true

  - choose:
      - conditions: "{{ swing_mode_prev is string and swing_mode_prev != state_attr(climate_device, 'swing_mode') }}"
        sequence:
          - service: climate.set_swing_mode
            data:
              swing_mode: "{{ swing_mode_prev }}"
            target:
              entity_id: !input climate_device
          - wait_for_trigger:
              - platform: template
                value_template: "{{ state_attr(climate_device, 'swing_mode') == swing_mode_prev }}"
            timeout: "00:00:15"
            continue_on_timeout: true

  - choose:
      - conditions: "{{ resume_action | length > 0 }}"
        sequence: !input resume_action

An additional trigger on AC state change could be added with a dedicated path for forcing it off after few seconds

Thanks for your reply. And yes, I also came up with this solution unfortunately that doesn't work because my Daikin AC only has Fan/cool/auto/heat... mode but not On of Off state. When using the on/off button on the remote it doesn't change mode, only state from off to on. This on/off state is not available in the Daikin integration. When I use the "remote" on my HA dashboard then it works if you click on "Heat" which triggers a mod change (even when the previous mode was Heat) Any other ideas? I'm thinking maybe using current detection and use this as a trigger. Cheers, Luc