Setting Up a Development SSL Certificate for Local testing in Next.js (15)

dev-ssl-next15.md

Setting Up a Development SSL Certificate for Local testing

To enable features that require HTTPS, such as device orientation, you can set up a local SSL certificate using mkcert and then access your development site securely on both your PC and mobile device.

Step 1: Install mkcert

First, install mkcert, which simplifies creating local SSL certificates trusted by your system.

• Using Chocolatey (Recommended)

  choco install mkcert

• Or using Scoop

  scoop install mkcert

If you don't have Chocolatey installed, you can install it by running the following command in PowerShell as Administrator:

Set-ExecutionPolicy Bypass -Scope Process -Force; [System.Net.ServicePointManager]::SecurityProtocol = [System.Net.ServicePointManager]::SecurityProtocol -bor 3072; iex ((New-Object System.Net.WebClient).DownloadString('https://community.chocolatey.org/install.ps1'))

Step 2: Create the SSL Certificate

After installing mkcert, run the following commands to set up a local certificate for localhost:

# Install the local CA in the system trust store
mkcert -install

# Create certificate for localhost in your project directory
cd your-project-directory
mkcert localhost

This will create two files in your current directory:

• localhost.pem (the certificate)
• localhost-key.pem (the private key)

Step 3: Move the Certificate Files

If you did not run the command in your project root, move the certificate files there:

# Adjust paths as needed
Move-Item localhost.pem your-project-directory
Move-Item localhost-key.pem your-project-directory

Step 4: Update Next.js Configuration for HTTPS

Update the dev script in package.json to enable HTTPS in development:

{
  "scripts": {
    "dev": "next dev --experimental-https"
  }
}

Step 5: Access Your Localhost Site on a Mobile Device

To access your development site on a mobile device, ensure that your computer and phone are on the same Wi-Fi network.

1. Get Your Computer's Local IP Address: Open a terminal and type ipconfig (Windows) or ifconfig (Mac/Linux) to find your local IP address (e.g., 192.168.1.100).

2. Access the Site on Your Phone: Open Safari or another browser on your mobile device and navigate to https://192.168.1.100:3000.

   • Note: You may need to trust the certificate manually on your mobile device:
     • On iOS, go to Settings > General > About > Certificate Trust Settings and enable full trust for your local certificate.

Important Notes

• Device Orientation and HTTPS: Some features, like DeviceMotionEvent and DeviceOrientationEvent, require HTTPS to function on iOS. If you don't serve your site over HTTPS, these events will not work, even in development.
• Ensure Motion & Orientation Access is Enabled: On iOS, go to Settings > Safari > Motion & Orientation Access and ensure it is enabled.

thanks