Skip to content

Instantly share code, notes, and snippets.

View caltech-chen's full-sized avatar

atao caltech-chen

View GitHub Profile
@V0XNIHILI
V0XNIHILI / gtk_wave_on_apple_silicon.md
Last active January 12, 2026 08:10
How to compile GTKWave for Apple Silicon (M1/M2/M3 Macs)

How to compile GTKWave for Apple Silicon (M1/M2/M3 Macs)

Based on this tutorial for the M1 Mac, find below a step-by-step guide on how to compile GTKWave from scratch for the M3 MacBook (Pro). See my LinkedIn post with the short announcement here.

Note: it is a prerequisite to have HomeBrew installed (find installation instructions at site).

Steps

1. Install required Homebrew packages

Install dlib and face_recognition on a Raspberry Pi

Instructions tested with a Raspberry Pi 2 with an 8GB memory card. Probably also works fine on a Raspberry Pi 3.

Steps

Download the latest Raspbian Jessie Light image. Earlier versions of Raspbian won't work.

Write it to a memory card using Etcher, put the memory card in the RPi and boot it up.