Visual Studio Code development container for the ESP-IDF

_vscode-esp-idf-container.md

Visual Studio Code development container for the ESP-IDF

This config defines a development container for ESP32 development based on the official Espressif IDF docker image.

Note that the flash and monitor commands only work on Linux. Update the /dev/ttyUSB0 paths in devcontainer.json to whatever the ESP32 ends up as on your machine.

devcontainer.json

{
	"name": "ESP-IDF",
	"build": {
		"dockerfile": "Dockerfile"
	},
	// Pre-configure ESP-IDF extension
	"settings": {
		"idf.showOnboardingOnInit": false,
		"idf.toolsPath": "/opt/esp",
		"idf.espIdfPath": "/opt/esp/idf",
		"idf.pythonBinPath": "/opt/esp/python_env/idf4.2_py3.6_env/bin/python",
		"idf.port": "/dev/ttyUSB0",
		"terminal.integrated.shell.linux": "/bin/bash"
	},
	// Install relevant extensions in the dev container
	"extensions": [
		"espressif.esp-idf-extension",
		"ms-vscode.cmake-tools",
		"ms-vscode.cpptools"
	],
	"userEnvProbe": "loginInteractiveShell",
	// Forward serial device to enable flash & monitor
	"runArgs": [
		"--device=/dev/ttyUSB0"
	]
}

Dockerfile

FROM espressif/idf:v4.2
RUN echo "source /opt/esp/idf/export.sh" >> /root/.bashrc

Doesn't seem to support, docs

USB passthrough is not yet supported on macOS. To connect to an Espressif device’s serial port from a Docker container on macOS, consider Using Remote Serial Port. The RFC port can be manually defined in the idf.port configuration setting for the ESP-IDF: Flash your Project command to work.