Scripts for doing winlink on Linux with pat and a Lab599 TX500

connect.sh

# Connect to a known RMS and retry every five minutes

RMS=${1-ardop:///OE5XIR?freq=14104}
DELAY_MIN=${2-5}
DELAY=$((60 * $DELAY_MIN))
SOUND_CARD=$(ardopcf -m 2> /dev/null | grep PnP | grep -o '[[:digit:]]\+' | head -n 1)

rigctld -m 2050 -r /dev/ttyUSB0 -d /dev/ttyUSB0 -p /dev/ttyUSB0 -P RTS -s 9600 &
ardopcf 8515 plughw:$SOUND_CARD,0 plughw:$SOUND_CARD,0 -m > /dev/null 2>&1 &
sleep 2

until pat connect $RMS
  do
    sleep $DELAY
done

killall rigctld
killall ardopcf

launch.sh

SOUND_CARD=$(ardopcf -m 2> /dev/null | grep PnP | grep -o '[[:digit:]]\+' | head -n 1)
rigctld -m 2050 -r /dev/ttyUSB0 -d /dev/ttyUSB0 -p /dev/ttyUSB0 -P RTS -s 9600 &
ardopcf 8515 plughw:$SOUND_CARD,0 plughw:$SOUND_CARD,0 -m > /dev/null 2>&1 &
pat http & 
xdg-open "http://localhost:8080"
PID=$!
wait $PID
killall rigctld
killall ardopcf
killall pat 

scan.sh

#       10m     15m     20m    30m    40m    80m
BANDS='\b28\.\|\b21\.\|\b14\.\|\b10\.\|\b7\.\|\b3\.' 
LIMIT=20
SOUND_CARD=$(ardopcf -m 2> /dev/null | grep PnP | grep -o '[[:digit:]]\+' | head -n 1)

pat rmslist -d > /dev/null 2>&1 # Update rmslist over internet

rigctld -m 2050 -r /dev/ttyUSB0 -d /dev/ttyUSB0 -p /dev/ttyUSB0 -P RTS -s 9600 & # Rigcltd for TX500
ardopcf 8515 plughw:$SOUND_CARD,0 plughw:$SOUND_CARD,0 -m > /dev/null 2>&1 &
sleep 2

RMS_LIST=(`pat rmslist -m ardop -s | grep "$BANDS" | head -n $LIMIT | awk '{print $NF}'`) # 20 closest RMS in $BANDS
for rms in "${RMS_LIST[@]}"
do
  pat connect ${rms}
  if [ $? -eq 0 ]; then
    echo "Success!"
    break
  fi
done

killall rigctld
killall ardopcf