PiKVM Relay board configuration

edid.txt

Source: https://docs.pikvm.org/edid/

Edit /etc/kvmd/tc358743-edid.hex

And write this:

00FFFFFFFFFFFF005262888800888888
1C150103800000780AEE91A3544C9926
0F505425400001000100010001000100
010001010101D51B0050500019400820
B80080001000001EEC2C80A070381A40
3020350040442100001E000000FC0050
492D4B564D20566964656F0A000000FD
00323D0F2E0F0000000000000000014D
02030400DE0D20A03058122030203400
F0B400000018E01500A0400016303020
3400000000000018B41400A050D01120
3020350080D810000018AB22A0A05084
1A3030203600B00E1100001800000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000045

This is the "1280x1024 as preferred. Useful for Gigabyte GA-H77-DS3H" EDID sample.

It seems to improve capture greatly.

relay.yaml

# Plop this in /etc/kvmd/override.d/relay.yaml and reboot
kvmd:
  atx:
    type: disabled
  gpio:
    #drivers:
      #wol_mirror:
      #  type: wol
      #  mac: "50:65:f3:20:44:a3"
      #wol_nas:
      #  type: wol
      #  mac: "00:11:32:ea:68:96"
    scheme:
      #wol_mirror:
      #  driver: wol_mirror
      #  pin: 0
      #  mode: output
      #  switch: false
      #wol_nas:
      #  driver: wol_nas
      #  pin: 0
      #  mode: output
      #  switch: false
      toggle_kvm:
        pin: 17
        mode: output
        switch: false
      relay2:
        pin: 27
        mode: output
        switch: false
      relay3:
        pin: 22
        mode: output
        switch: false
      relay4:
        pin: 23
        mode: output
        switch: false
    view:
      header:
        title: KVM, Power, & WoL
      table:
        - ["#KVM Input", "toggle_kvm|Toggle"]
        - ["#Relay #2", "relay2|Press"]
        - ["#Relay #3", relay3]
        - ["#Relay #4", relay4]
        #- []
        #- ["#Wake-on-LAN"]
        #- []
        #- ["#WOL Mirror", "wol_mirror|Send Wake-on-LAN"]
        #- ["#WOL NAS", "wol_nas|Send Wake-on-LAN"]