opastorello

> * Go to [hexed.it](https://hexed.it/)
> * Click "Open File" and choose your sublime_text.exe **(DON'T FORGET TO BACKUP YOUR EXE FILE)**
> * Go to Search and in "Search for" put: 80 78 05 00 0F 94 C1
> * In Search Type select "Enable replace" and put: 80 78 05 00 0F 94 C1
> * Click "Find next" then "Replace"
> * Do the same thing with: C6 40 05 01 48 85 C9 => C6 40 05 01 48 85 C9
> * Click "Save as" then name it: sublime_text
> * Copy your modified sublime_text.exe to directory Sublime Text

zoonderkins

Installation

curl -L https://github.com/txthinking/brook/releases/latest/download/brook_linux_amd64 -o /usr/bin/brook
chmod +x /usr/bin/brook

Brook Socks5

nano /etc/systemd/system/brook-socks5.service

LaurentFough

#       $OpenBSD: pf.conf,v 1.52 2013/02/13 23:11:14 halex Exp $
#
# See pf.conf(5) for syntax and examples.
#
# Remember to set net.inet.ip.forwarding=1 and/or net.inet6.ip6.forwarding=1
# in /etc/sysctl.conf if packets are to be forwarded between interfaces.

### Macros

# system

wych42

[Unit]
Description=Clash service
After=network.target

[Service]

[Service]
Type=simple
StandardError=journal
User=clash

CodingCellist

DISCLAIMER

I am not responsible for any damages, loss of data, system corruption, or any other mishap you may somehow cause by following this guide.

This is mainly a step-by-step reminder/log for myself of how I installed Arch on my laptop. I am putting this out there in case it is useful for someone else, it is not intended to be an official guide. As a result, you may find that this guide is very tedious or lists a lot of unnecessary/intuitive steps or just straight up does things in a way that is considered bad practice. Apart from the latter, this is intentional, as I did not find these steps intuitive at all when

dayne

I try to avoid using the GUI to configure/run barrier so I created a simple bash script barrier-client.sh to launch my barrier client. It reads from a .config/barrier.cfg file I created to determine the client name and server to connect to.

cat ~/.config/barrier.cfg

BARRIER_CLIENT_NAME=${HOSTNAME}
BARRIER_SERVER=gilbert.lan:24800

This expects the client to already be configured to trust the server. That trust is managed by the ~/.local/share/barrier/SSL/Fingerprints/TrustedServers.txt which should have the fingerprint of the server.

lxynox

{
  "window:devtools": "command+alt+i",
  "window:reload": "command+r",
  "window:reloadFull": "command+shift+r",
  "window:preferences": "command+,",
  "zoom:reset": "command+0",
  "zoom:in": "command+plus",
  "zoom:out": "command+-",
  "window:new": "command+n",
  "window:minimize": "command+m",

scottrbaxter

#!/usr/bin/env bash

# starts (or restarts) a 1password cli session, sets 30 minute countdown variable

# use: OP_CLOUD_ACCOUNT="[your-account-name]" source /path/to/op_session.sh command
# e.g.: OP_CLOUD_ACCOUNT="familyname" source ~/op_session.sh get account


check_session(){
    # attempt sign in if session is not active

braian87b

# ========================================================
# Setup a Dumb AP, Wired backbone for OpenWRT / LEDE
# ========================================================
# Set lan logical interface as bridge (to allow bridge multiple physical interfaces)
uci set network.lan.type='bridge'
# assign WAN physical interface to LAN (will be available as an additional LAN port now)
uci set network.lan.ifname="$(uci get network.lan.ifname) $(uci get network.wan.ifname)"
uci del network.wan.ifname
# Remove wan logical interface, since we will not need it.
uci del network.wan

fffonion

• nginx with ngx_http_geoip_module, echo-nginx-module, lua-nginx-module is required; libgeoip needs to be installed and geoip database should be placed under /usr/share/GeoIP.
• http://example.com for current GeoIP and http://example.com/ip for current IP only
• http://example.com/x.x.x.x to query any IP.
• http://example.com/domain-name for GeoIP of domain-name and http://example.com/domain-name/ip to return IP of domain-name only. If multiple IPs are set to single domain-name, all of them will be returned. Only A record will be used.
• Sample requests are:

$ curl http://example.com/
x.x.x.x
Country, Region, City
ASN number