Zigbee2MQTT latest-dev changelog

changelog.md

Improvements

• #10986 Schneider Electric 545D6514: support indicator mode (@as8net)
• #10975 BITUO TECHNIK SPM01-U01: support OTA (@mrmaximas)

Fixes

• #30065 Remove extra > in onboarding (@Bi11)
• #10993 Biome floating promises detection (@Nerivec)
• #10994 Develco SIRZB-111: add to warning info reverse list (@Zingo89)
• #29931 Moes ZM-104B-M (_TZ3000_qaa59zqd): enable power outage memory (@Koenkk)
• #10991 Plugwise 170-01: improve integration (@bouwew)
• #10998 Schneider Electric WDE002386: improve integration (@rettelx)
• #10987 Sinope TH1123ZB-G2 and TH1124ZB-G2: swap sensing and off values for backlight dimming modes (@lemoinem)
• #10988 Third Reality 3RSB01085Z: fix actions (@3reality-support)
• #30063 Tuya RB-SRAIN01: expose illumance as illuminance_raw (@Koenkk)
• #10862 Wirenboard WB-MSW-ZIGBEE v.4: fix custom cluster (@BurchuMikhail)
• #10967 Onokom: various updates (@zwg3)
• #10968 Third Reality 3RSB01085Z: various updates (@3reality-support)
• #10959 Bosch BTH-R*: Tweak attribute reporting config (@burmistrzak)
• #30058 SONOFF S60ZBTPF: add missing energy expose (@Koenkk)
• #29833 Sunricher SR-ZG9092A: fix configure failing (@Koenkk)
• #23155 Tuya _TZ3000_x3ewpzyr: disable unecessary polling for some versions (@Koenkk)
• #30054 Tuya TRV602Z: fix invalid time (@Koenkk)
• #1585 Ember: revert queueMicrotask change (@Nerivec)
• #1583 Ember: ASH layer optimizations (@Nerivec)
• #1582 Ember: tweak error logging (@Nerivec)
• #1580 Guard against a undefined device on data receipt (@bobrippling)

Windfront

• #357 fix: better handle last_seen: "disable" (@Nerivec)
• fix: enforce device tile height to avoid grid weirdness
• fix: initial activity for multi-instance
• fix: "Coordinator - Device left" display bug

Frontend

New supported devices

This release adds support for 15 devices:

• #10992 92900336667 Philips Hue white ambiance GU10 with Bluetooth (@wollew)
• #10976 MSA201Z Merrytek 24 GHz human presence sensor (TS0601, _TZE284_ajuasrmx) (@javierguede)
• #10917 SM0501 SIMON 3 gang smart dimming switch (@Crasher-stack)
• #10979 6254380 CTM Lyng 2.0 Stove guard (@HenrikHills)
• #10963 9290012574 Philips Hue White and Color Ambiance B22/E27 806lm (@neyzm)
• #10970 P2-WT TCL Water leak detector (@devkaiwang)
• #10978 PIMS3028 KnockautX Cover plug-in receiver multi STAK 3/STAS 3 (@phiphi060)
• #10908 SR-ZG9001T2-SW Sunricher Zigbee 2-gang touch panel (@niracler)
• #10941 SRP-ZG9105-CV Sunricher Constant voltage Zigbee LED driver (@jabe93)
• #10980 X99-G-kbFan-1g-ZG-LN-11 Coswall Fan & light switch (@rftafas)
• #10964 067767 Legrand Wireless Color Ambiance Switch 067767/68/69 - 077710L (@arnauddeslandes)
• #10962 929003853404 Philips Hue white ambiance and color 810lm A60 E27 (@chris-1243)
• #10962 929003853803 Philips Hue white ambiance and color 1100lm A19 E26 (@chris-1243)
• #10958 ZM4LT3 Moes 3-gang switch module (@andrei-lazarov)
• #10961 ZMS-208US-3 Zemismart Smart screen switch 3 gang (@Rod-Persky)

Fixed device detections

• #30122 Detect _TZE284_gaj531w3 as Yushun YS-MT750L (@Koenkk)
• #30124 Detect ZSDR-850 as Trust ZSDR-850 (@Koenkk)
• #30092 Detect _TZ3000_b4awzgct as Tuya SH-SC07 (@Koenkk)
• #10973 Detect _TZ3210_wbsgmojq as Moes ZB-LZD10-RCW (@FVerhamme)
• #10920 Detect ZS-304Z as Arteco ZS-304Z (@MasterFeige)
• #10960 Detect _TZ3000_amdymr7l as BlitzWolf BW-SHP13 (@mike81gr)
• #10957 Detect zbeacon as zbeacon DS01 (@neyzm)

Changelog generator error

@xion2000 many thanks, is working!

@xion2000 thank you very much to made this and info where to place this in the system. It worked for me too. The only thing which is not showing is the battery, I don't have it connected with an USB-C cable but working with 3x AAA batteries.
Is there a possibility to have this info working in your file?

Hi,

I just purchased the EcoDim DIM.06 dimmer but found that is not supported yet.
Would it be possible to add this one?
Thanks in advance.

https://www.123led.nl/EcoDim-Zigbee-stekkerdimmer-0-100W-Fase-afsnijding-RC-EcoDim-DIM-06-i7926-t4329.html

{
"description": "Automatically generated definition",
"exposes": [
{
"features": [
{
"access": 7,
"description": "On/off state of this light",
"label": "State",
"name": "state",
"property": "state",
"type": "binary",
"value_off": "OFF",
"value_on": "ON",
"value_toggle": "TOGGLE"
},
{
"access": 7,
"description": "Brightness of this light",
"label": "Brightness",
"name": "brightness",
"property": "brightness",
"type": "numeric",
"value_max": 254,
"value_min": 0
}
],
"type": "light"
},
{
"access": 2,
"description": "Triggers an effect on the light (e.g. make light blink for a few seconds)",
"label": "Effect",
"name": "effect",
"property": "effect",
"type": "enum",
"values": [
"blink",
"breathe",
"okay",
"channel_change",
"finish_effect",
"stop_effect"
]
},
{
"access": 7,
"category": "config",
"description": "Controls the behavior when the device is powered on after power loss",
"label": "Power-on behavior",
"name": "power_on_behavior",
"property": "power_on_behavior",
"type": "enum",
"values": [
"off",
"on",
"toggle",
"previous"
]
},
{
"access": 1,
"category": "diagnostic",
"description": "Link quality (signal strength)",
"label": "Linkquality",
"name": "linkquality",
"property": "linkquality",
"type": "numeric",
"unit": "lqi",
"value_max": 255,
"value_min": 0
}
],
"model": "eco-dim06-zigbee",
"options": [
{
"access": 2,
"description": "Controls the transition time (in seconds) of on/off, brightness, color temperature (if applicable) and color (if applicable) changes. Defaults to 0 (no transition).",
"label": "Transition",
"name": "transition",
"property": "transition",
"type": "numeric",
"value_min": 0
},
{
"access": 2,
"description": "State actions will also be published as 'action' when true (default false).",
"label": "State action",
"name": "state_action",
"property": "state_action",
"type": "binary",
"value_off": false,
"value_on": true
}
],
"source": "generated",
"supports_ota": false,
"vendor": "EcoDim BV"
}

@xion2000 thank you very much to made this and info where to place this in the system. It worked for me too. The only thing which is not showing is the battery, I don't have it connected with an USB-C cable but working with 3x AAA batteries. Is there a possibility to have this info working in your file?

I have mine working of batteries only also and have the same problem with batteries NOT showing in Zigbee2MQTT unfortunately

Buonasera a tutti, chiedo gentilmente se è possibile aggiungere il seguente dispositivo:

https://italian.alibaba.com/product-detail/subject-1600753083531.html?from=share&ckvia=share_80DFED87F71A45E98E35F2B59887F5D0&needReward=true

export default {
zigbeeModel: ['TS0601'],
model: 'TS0601',
vendor: '_TZE204_o9d1hdma',
description: 'Automatically generated definition',
extend: [],
meta: {},
};

il dispositivo in questione è praticamente identico ad un dispositivo presente nella lista dispositivi supportati, ne ho 6 in casa mi piacerebbe tantissimo vederli funzionare
https://www.zigbee2mqtt.io/devices/AE-669K.html

Grazie per il vostro prezioso aiuto

Mattia

@mattia9508 ciao,

puoi usare un external converter

guarda qui

Buongiorno, grazie per la risposta, uso HA ormai da 2 anni ma sto entrando solo adesso nell ambito più tecnico, stasera riprovo a seguire meglio la guida su come usare il convertitore esterno. Grazie Il giorno lun 13 ott 2025 alle 09:34 Mattia Marchiorato < ***@***.***> ha scritto:

…

***@***.**** commented on this gist. ------------------------------ @mattia9508 <https://github.com/mattia9508> ciao, puoi usare un external converter guarda qui <Koenkk/zigbee2mqtt#22079> — Reply to this email directly, view it on GitHub <https://gist.github.com/Koenkk/bfd4c3d1725a2cccacc11d6ba51008ba#gistcomment-5800400> or unsubscribe <https://github.com/notifications/unsubscribe-auth/AMNZT2F3TROUVH6W6KR3QQT3XNIY7BFKMF2HI4TJMJ2XIZLTSOBKK5TBNR2WLJZTGUZDONBXGSSG4YLNMWUGCY3UN5ZF62LEQKSXMYLMOVS2I5DSOVS2I3TBNVS3W5DIOJSWCZC7OBQXE5DJMNUXAYLOORPWCY3UNF3GS5DZQKSXMYLMOVS2IZ3JON2KI3TBNVS2W5DIOJSWCZC7OR4XAZNMON2WE2TFMN2F65DZOBS2WR3JON2EG33NNVSW45FGORXXA2LDOOIYFJDUPFYGLJDHNFZXJJLWMFWHKZNJGEZDGOBQHA2DIN5HORZGSZ3HMVZKMY3SMVQXIZI> . You are receiving this email because you were mentioned. Triage notifications on the go with GitHub Mobile for iOS <https://apps.apple.com/app/apple-store/id1477376905?ct=notification-email&mt=8&pt=524675> or Android <https://play.google.com/store/apps/details?id=com.github.android&referrer=utm_campaign%3Dnotification-email%26utm_medium%3Demail%26utm_source%3Dgithub> .

Bonjour
Pouvez vous ajouter cet appareil SMT10020 de schneider svp, c'est un capteur d'echauffement des cables

Hi can you add motion and light sensor.
This is the generated external converter :

const {identify, iasZoneAlarm, battery, illuminance} = require('zigbee-herdsman-converters/lib/modernExtend');


const definition = {
    zigbeeModel: ['TS0601'],
    model: 'TS0601',
    vendor: '_TZE200_na5qlzow',
    description: 'Automatically generated definition',
    extend: [identify(), iasZoneAlarm({"zoneType":"generic","zoneAttributes":["alarm_1","alarm_2","tamper","battery_low"]}), battery(), illuminance()],
    meta: {},
};

module.exports = definition;

Another tuya temp/humidity with clock device

export default {
zigbeeModel: ['TS0601'],
model: 'TS0601',
vendor: '_TZE284_cwyqwqbf',
description: 'Automatically generated definition',
extend: [],
};

Hello can you add the necessary definition for an AVATTO ZDMS16-2
It is a Zigbee Module 2 channels Dimmer.
This is the generated external converter :

{
"last_seen": "2025-11-04T18:34:39.089Z",
"linkquality": 160,
"device": {
"applicationVersion": 78,
"dateCode": "",
"friendlyName": "0xa4c1385b98ce2ed7",
"hardwareVersion": 1,
"ieeeAddr": "0xa4c1385b98ce2ed7",
"manufacturerID": 4417,
"manufacturerName": "_TZE284_jtbgusdc",
"networkAddress": 12724,
"powerSource": "Mains (single phase)",
"stackVersion": 0,
"type": "Router",
"zclVersion": 3
}
}

const definition = {
zigbeeModel: ['TS0601'],
model: 'TS0601',
vendor: '_TZE284_jtbgusdc',
description: 'Automatically generated definition',
extend: [],
meta: {},
};

module.exports = definition;

Thanks for your efforts.
Kind regards.

Hello can you add the necessary definition for an AVATTO ZDMS16-2 It is a Zigbee Module 2 channels Dimmer. This is the generated external converter :

{ "last_seen": "2025-11-04T18:34:39.089Z", "linkquality": 160, "device": { "applicationVersion": 78, "dateCode": "", "friendlyName": "0xa4c1385b98ce2ed7", "hardwareVersion": 1, "ieeeAddr": "0xa4c1385b98ce2ed7", "manufacturerID": 4417, "manufacturerName": "_TZE284_jtbgusdc", "networkAddress": 12724, "powerSource": "Mains (single phase)", "stackVersion": 0, "type": "Router", "zclVersion": 3 } }

const definition = { zigbeeModel: ['TS0601'], model: 'TS0601', vendor: '_TZE284_jtbgusdc', description: 'Automatically generated definition', extend: [], meta: {}, };

module.exports = definition;

Thanks for your efforts. Kind regards.

That manufacturerID is already supported. Are you using the last version of Zigbee2MQTT?

Reading your answer I went back to my Jeedom and saw that my Zigbee2MQTT version was 1.42.0.
I upgraded to 2.6.3 and then miracle, the module is correctly working.
Many thanks for your quick reaction. I will now buy several modules to go further.
Have a nice day!

Could anyone more skilled than me in Z2M add the new Namron Zigbee Thermostat?
Article No: 4512776
Name: Namron Zigbee termostat for panelovn PRO hvit
Product page link: https://www.elektroimportoren.no/namron-zigbee-termostat-for-panelovn-pro-hvit/4512776/Product.html

I have a Namron Zigbee panel heater released before the new thermostats + oven line were released. I suspect this new thermostat would act much the same way as the existing Namron 540139X would (https://www.zigbee2mqtt.io/devices/540139X.html)

If i could help in any way, please let me know.

Generated external definition (from Z2M Dev Console)

import * as m from 'zigbee-herdsman-converters/lib/modernExtend';

export default {
    zigbeeModel: ['Panel Heater'],
    model: 'Panel Heater',
    vendor: 'NAMRON AS',
    description: 'Automatically generated definition',
    extend: [m.electricityMeter()],
};

{
    "description": "Automatically generated definition",
    "exposes": [
        {
            "access": 5,
            "description": "Instantaneous measured power",
            "label": "Power",
            "name": "power",
            "property": "power",
            "type": "numeric",
            "unit": "W"
        },
        {
            "access": 5,
            "description": "Measured electrical potential value",
            "label": "Voltage",
            "name": "voltage",
            "property": "voltage",
            "type": "numeric",
            "unit": "V"
        },
        {
            "access": 5,
            "description": "Instantaneous measured electrical current",
            "label": "Current",
            "name": "current",
            "property": "current",
            "type": "numeric",
            "unit": "A"
        },
        {
            "access": 5,
            "description": "Sum of consumed energy",
            "label": "Energy",
            "name": "energy",
            "property": "energy",
            "type": "numeric",
            "unit": "kWh"
        },
        {
            "access": 1,
            "category": "diagnostic",
            "description": "Link quality (signal strength)",
            "label": "Linkquality",
            "name": "linkquality",
            "property": "linkquality",
            "type": "numeric",
            "unit": "lqi",
            "value_max": 255,
            "value_min": 0
        }
    ],
    "model": "Panel Heater",
    "options": [
        {
            "access": 2,
            "description": "Calibrates the power value (percentual offset), takes into effect on next report of device.",
            "label": "Power calibration",
            "name": "power_calibration",
            "property": "power_calibration",
            "type": "numeric",
            "value_step": 0.1
        },
        {
            "access": 2,
            "description": "Number of digits after decimal point for power, takes into effect on next report of device. This option can only decrease the precision, not increase it.",
            "label": "Power precision",
            "name": "power_precision",
            "property": "power_precision",
            "type": "numeric",
            "value_max": 3,
            "value_min": 0
        },
        {
            "access": 2,
            "description": "Calibrates the voltage value (percentual offset), takes into effect on next report of device.",
            "label": "Voltage calibration",
            "name": "voltage_calibration",
            "property": "voltage_calibration",
            "type": "numeric",
            "value_step": 0.1
        },
        {
            "access": 2,
            "description": "Number of digits after decimal point for voltage, takes into effect on next report of device. This option can only decrease the precision, not increase it.",
            "label": "Voltage precision",
            "name": "voltage_precision",
            "property": "voltage_precision",
            "type": "numeric",
            "value_max": 3,
            "value_min": 0
        },
        {
            "access": 2,
            "description": "Calibrates the current value (percentual offset), takes into effect on next report of device.",
            "label": "Current calibration",
            "name": "current_calibration",
            "property": "current_calibration",
            "type": "numeric",
            "value_step": 0.1
        },
        {
            "access": 2,
            "description": "Number of digits after decimal point for current, takes into effect on next report of device. This option can only decrease the precision, not increase it.",
            "label": "Current precision",
            "name": "current_precision",
            "property": "current_precision",
            "type": "numeric",
            "value_max": 3,
            "value_min": 0
        },
        {
            "access": 2,
            "description": "Calibrates the energy value (percentual offset), takes into effect on next report of device.",
            "label": "Energy calibration",
            "name": "energy_calibration",
            "property": "energy_calibration",
            "type": "numeric",
            "value_step": 0.1
        },
        {
            "access": 2,
            "description": "Number of digits after decimal point for energy, takes into effect on next report of device. This option can only decrease the precision, not increase it.",
            "label": "Energy precision",
            "name": "energy_precision",
            "property": "energy_precision",
            "type": "numeric",
            "value_max": 3,
            "value_min": 0
        }
    ],
    "source": "generated",
    "supports_ota": false,
    "vendor": "NAMRON AS"
}