burkeholland

description
Mini Beast

<tool_preambles>

• Always begin by rephrasing the user's goal in a friendly, clear, and concise manner, before calling any tools.
• Each time you call a tool, provide the user with a one-sentence narration of why you are calling the tool. You do NOT need to tell them WHAT you are doing, just WHY you are doing it.
  • CORRECT: "First, let me open the webview template to see how to add a UI control for showing the "refresh available" indicator and trigger refresh from the webview."
  • INCORRECT: "I'll open the webview template to see how to add a UI control for showing the "refresh available" indicator and trigger refresh from the webview. I'm going to read settingsWebview.html."
• ALWAYS use a todo list to track your progress using the todo list tool.

burkeholland

Beast Mode

Beast Mode is a custom chat mode for VS Code agent that adds an opinionated workflow to the agent, including use of a todo list, extensive internet research capabilities, planning, tool usage instructions and more. Designed to be used with 4.1, although it will work with any model.

Below you will find the Beast Mode prompt in various versions - starting with the most recent - 3.1

Installation Instructions

• Go to the "agent" dropdown in VS Code chat sidebar and select "Configure Modes".
• Select "Create new custom chat mode file"

yorickdowne

Debian 13

Caution Upgrading from Debian 12 to Debian 13 on machines with mdadm has intermittently failed for me; symptom is that grub EFI is not up to date and system boots into BIOS. Root cause under investigation; it might not be related to mdadm.

To start, read the official release notes.

If your install fits into "vanilla Debian plus maybe a handful of 3rd-party repos", then this guide for a simple upgrade to Debian 13 "trixie" from Debian 12 "bookworm" can be helpful. 3rd-party repos are handled with a find command.

Note upgrade is only supported from Debian 12 to Debian 13. If you are on Debian 11, upgrade to Debian 12 first. Then once on Debian 12, you can upgrade to Debian 13.

damico

import torch, grp, pwd, os, subprocess
devices = []
try:
	print("\n\nChecking ROCM support...")
	result = subprocess.run(['rocminfo'], stdout=subprocess.PIPE)
	cmd_str = result.stdout.decode('utf-8')
	cmd_split = cmd_str.split('Agent ')
	for part in cmd_split:
		item_single = part[0:1]
		item_double = part[0:2]

ednisley

henrytriplette

Select the hard drive

From administrator cmd run these commands to identify and select the hard drive

diskpart
 
list disk
 
sel disk 

Assign it a drive letter

hencjo

# Use xinput to find your keyboards.

$ xinput 
⎡ Virtual core pointer                    	id=2	[master pointer  (3)]
⎜   ↳ Virtual core XTEST pointer              	id=4	[slave  pointer  (2)]
⎜   ↳ SynPS/2 Synaptics TouchPad              	id=11	[slave  pointer  (2)]
⎜   ↳ TPPS/2 IBM TrackPoint                   	id=12	[slave  pointer  (2)]
⎜   ↳ Logitech Performance MX                 	id=14	[slave  pointer  (2)]
⎜   ↳ E-Signal USB Gaming Keyboard            	id=16	[slave  pointer  (2)]
⎣ Virtual core keyboard                   	id=3	[master keyboard (2)]

Ruben-E

Setup interface eth1 and configure the DHCP/DNS server

configure
 
set interfaces ethernet eth1 address 192.168.2.254/24
set interfaces ethernet eth1 description "eth1 - LAN"
set interfaces ethernet eth1 duplex auto
set interfaces ethernet eth1 speed auto
 

zoharbabin

certbot certificates
# find the path to the fullchain certificate you wish to reinstall
certbot revoke --cert-path /etc/letsencrypt/live/... #path to the cert from above
certbot delete --cert-name yourdomain.com
rm -Rf /etc/apache2/sites-available/000-default-le-ssl.conf #or whatever the name of the apache conf you had it configured on 
rm -Rf 000-default-le-ssl.conf #or whatever the name of the apache conf you had it configured on
sudo apache2ctl restart
certbot #follow the guide to setup the new certificate

devinmancuso

# Import unittest module for creating unit tests
import unittest

# Import time module to implement 
import time

# Import the Selenium 2 module (aka "webdriver")
from selenium import webdriver

# For automating data input