Skip to content

Instantly share code, notes, and snippets.

@FlorianHeigl

FlorianHeigl/kernel

Last active November 2, 2025 23:24
Show Gist options

  • Select an option

    Learn more about clone URLs
  • Save FlorianHeigl/0ffc6258cc2b321f981034f2c1c4c4a0 to your computer and use it in GitHub Desktop.

Select an option

Learn more about clone URLs
Save FlorianHeigl/0ffc6258cc2b321f981034f2c1c4c4a0 to your computer and use it in GitHub Desktop.
Download ZIP
cubietruck no2 nand foobar
Raw
kernel
<6>Booting Linux on physical CPU 0
<6>Initializing cgroup subsys cpuset
<6>Initializing cgroup subsys cpu
<5>Linux version 3.4.61+ (matson@ubt) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1u buntu5) ) #1 SMP PREEMPT Sat Oct 26 13:08:57 CST 2013
CPU: ARMv7 Processor [410fc074] revision 4 (ARMv7), cr=10c5387d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine: sun7i
<6>Memory cut off:
<6> MALI : 0x5c000000 - 0x5fffffff ( 64 MB)
<4>Ignoring unrecognised tag 0x00000000
<6>Memory Reserved:
<6> SYS : 0x43000000 - 0x4300ffff ( 64 kB)
<6> VE : 0x44000000 - 0x48ffffff ( 80 MB)
<6> G2D : 0x49000000 - 0x49ffffff ( 16 MB)
<6> LCD : 0x5a000000 - 0x5bffffff ( 32 MB)
Memory policy: ECC disabled, Data cache writealloc
<6>sunxi: Allwinner A20 (AW1651/sun7i) detected.
<7>On node 0 totalpages: 507904
<7>free_area_init_node: node 0, pgdat c088e2c0, node_mem_map d0000000
<7> DMA zone: 512 pages used for memmap
<7> DMA zone: 0 pages reserved
<7> DMA zone: 65024 pages, LIFO batch:15
<7> Normal zone: 1008 pages used for memmap
<7> Normal zone: 111632 pages, LIFO batch:31
<7> HighMem zone: 2576 pages used for memmap
<7> HighMem zone: 327152 pages, LIFO batch:31
<6>PERCPU: Embedded 7 pages/cpu @d100e000 s7360 r8192 d13120 u32768
<7>pcpu-alloc: s7360 r8192 d13120 u32768 alloc=8*4096<c>
<7>pcpu-alloc: <c>[0] <c>0 <c>[0] <c>1 <c>
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 503808
<5>Kernel command line: console=tty0 root=/dev/nandb loglevel=8 console=tty0 con sole=ttyS0,115200 hdmi.audio=EDID:0 disp.screen0_output_mode=EDID:800x600p50 roo twait panic=10 rootfstype=ext4 rootflags=discard _naaand
<6>PID hash table entries: 4096 (order: 2, 16384 bytes)
<6>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
<6>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>allocated 4194304 bytes of page_cgroup
<6>please try 'cgroup_disable=memory' option if you don't want memory cgroups
<6>Memory: 448MB 1536MB = 1984MB total
<5>Memory: 1869004k/1869004k available, 162612k reserved, 1318912K highmem
<5>Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.text : 0xc0008000 - 0xc07f3654 (8110 kB)
.init : 0xc07f4000 - 0xc0829cc0 ( 216 kB)
.data : 0xc082a000 - 0xc0894e90 ( 428 kB)
.bss : 0xc0894eb4 - 0xc0a53028 (1785 kB)
<6>SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
<6>Preemptible hierarchical RCU implementation.
<6> RCU dyntick-idle grace-period acceleration is enabled.
<6> Additional per-CPU info printed with stalls.
<6>NR_IRQS:192
<6>Architected local timer running at 24.00MHz.
<6>sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
<2>start_kernel(): bug: interrupts were enabled early
<6>Console: colour dummy device 80x30
<6>console [tty0] enabled
<6>Calibrating delay loop... <c>1816.98 BogoMIPS (lpj=9084928)
<6>pid_max: default: 32768 minimum: 301
<6>Mount-cache hash table entries: 512
<6>Initializing cgroup subsys cpuacct
<6>Initializing cgroup subsys memory
<6>Initializing cgroup subsys devices
<6>Initializing cgroup subsys freezer
<6>Initializing cgroup subsys blkio
<6>Initializing cgroup subsys perf_event
<6>CPU: Testing write buffer coherency: ok
<6>CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
<6>hw perfevents: enabled with ARMv7 Cortex-A7 PMU driver, 5 counters available
<6>Setting up static identity map for 0x4057ef30 - 0x4057ef88
CPU1: Booted secondary processor
<6>CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
<6>Brought up 2 CPUs
<6>SMP: Total of 2 processors activated (3640.52 BogoMIPS).
<6>devtmpfs: initialized
<6>dummy:
<6>NET: Registered protocol family 16
<6>hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
<6>hw-breakpoint: maximum watchpoint size is 8 bytes.
<6>[ccu-inf] aw clock manager init
<6>[ccu-inf] aw_ccu_init
<6>[ccu-inf] script config pll3 to 297MHz
<6>[ccu-inf] script config pll4 to 300MHz
<6>[ccu-inf] script config pll6 to 600MHz
<6>[ccu-inf] script config pll7 to 297MHz
<6>[ccu-inf] script config pll8 to 336MHz
<6>Init eGon pin module V2.0
<6>bio: create slab <bio-0> at 0
<6>sunxi_gpio driver init ver 1.3
<6>gpiochip_add: registered GPIOs 1 to 2 on device: A1X_GPIO
<5>SCSI subsystem initialized
<7>libata version 3.00 loaded.
<6>usbcore: registered new interface driver usbfs
<6>usbcore: registered new interface driver hub
<6>usbcore: registered new device driver usb
<6>Linux media interface: v0.10
<6>Linux video capture interface: v2.00
<6>Advanced Linux Sound Architecture Driver Version 1.0.25.
<6>cfg80211: Calling CRDA to update world regulatory domain
<6>Switching to clocksource arch_sys_counter
<5>FS-Cache: Loaded
<6>CacheFiles: Loaded
<6>sw_hcd_host0 sw_hcd_host0: sw_hcd host driver
<6>sw_hcd_host0 sw_hcd_host0: new USB bus registered, assigned bus number 1
<6>hub 1-0:1.0: USB hub found
<6>hub 1-0:1.0: 1 port detected
<6>NET: Registered protocol family 2
<6>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
<6>TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
<6>TCP: Hash tables configured (established 131072 bind 65536)
<6>TCP: reno registered
<6>UDP hash table entries: 512 (order: 2, 16384 bytes)
<6>UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
<6>NET: Registered protocol family 1
<6>RPC: Registered named UNIX socket transport module.
<6>RPC: Registered udp transport module.
<6>RPC: Registered tcp transport module.
<6>RPC: Registered tcp NFSv4.1 backchannel transport module.
pm: select wifi: ap6210
<6>ap6xxx: config 32k clock
[wifi_pm]: wifi gpio init is OK !!
[rfkill]: rfkill set power 0
<6>audit: initializing netlink socket (disabled)
<5>type=2000 audit(0.530:1): initialized
highmem bounce pool size: 64 pages
<5>VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
<5>NFS: Registering the id_resolver key type
<6>NTFS driver 2.1.30 [Flags: R/W].
<6>fuse init (API version 7.18)
<6>msgmni has been set to 1074
<6>alg: No test for stdrng (krng)
<6>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
<6>io scheduler noop registered
<6>io scheduler deadline registered
<6>io scheduler cfq registered (default)
<6>sunxi disp driver loaded (/dev/disp api 1.0)
<6>Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
<6>[uart]: used uart info.: 0x05
<6>[uart]: serial probe 0 irq 33 mapbase 0x01c28000
<6>sunxi-uart.0: ttyS0 at MMIO 0x1c28000 (irq = 33) is a U6_16550A
[ 0.000000] Booting Linux on physical CPU 0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.4.61+ (matson@ubt) (gcc version 4.6.3 (Ubuntu/Lin aro 4.6.3-1ubuntu5) ) #1 SMP PREEMPT Sat Oct 26 13:08:57 CST 2013
[ 0.000000] CPU: ARMv7 Processor [410fc074] revision 4 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instructio n cache
[ 0.000000] Machine: sun7i
[ 0.000000] Memory cut off:
[ 0.000000] MALI : 0x5c000000 - 0x5fffffff ( 64 MB)
[ 0.000000] Ignoring unrecognised tag 0x00000000
[ 0.000000] Memory Reserved:
[ 0.000000] SYS : 0x43000000 - 0x4300ffff ( 64 kB)
[ 0.000000] VE : 0x44000000 - 0x48ffffff ( 80 MB)
[ 0.000000] G2D : 0x49000000 - 0x49ffffff ( 16 MB)
[ 0.000000] LCD : 0x5a000000 - 0x5bffffff ( 32 MB)
[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
[ 0.000000] sunxi: Allwinner A20 (AW1651/sun7i) detected.
[ 0.000000] On node 0 totalpages: 507904
[ 0.000000] free_area_init_node: node 0, pgdat c088e2c0, node_mem_map d000000 0
[ 0.000000] DMA zone: 512 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 65024 pages, LIFO batch:15
[ 0.000000] Normal zone: 1008 pages used for memmap
[ 0.000000] Normal zone: 111632 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2576 pages used for memmap
[ 0.000000] HighMem zone: 327152 pages, LIFO batch:31
[ 0.000000] PERCPU: Embedded 7 pages/cpu @d100e000 s7360 r8192 d13120 u32768
[ 0.000000] pcpu-alloc: s7360 r8192 d13120 u32768 alloc=8*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pag es: 503808
[ 0.000000] Kernel command line: console=tty0 root=/dev/nandb loglevel=8 cons ole=tty0 console=ttyS0,115200 hdmi.audio=EDID:0 disp.screen0_output_mode=EDID:80 0x600p50 rootwait panic=10 rootfstype=ext4 rootflags=discard _naaand
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] allocated 4194304 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memor y cgroups
[ 0.000000] Memory: 448MB 1536MB = 1984MB total
[ 0.000000] Memory: 1869004k/1869004k available, 162612k reserved, 1318912K h ighmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc07f3654 (8110 kB)
[ 0.000000] .init : 0xc07f4000 - 0xc0829cc0 ( 216 kB)
[ 0.000000] .data : 0xc082a000 - 0xc0894e90 ( 428 kB)
[ 0.000000] .bss : 0xc0894eb4 - 0xc0a53028 (1785 kB)
[ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, N odes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Additional per-CPU info printed with stalls.
[ 0.000000] NR_IRQS:192
[ 0.000000] Architected local timer running at 24.00MHz.
[ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 17895 6ms
[ 0.000000] start_kernel(): bug: interrupts were enabled early
[ 0.000000] Console: colour dummy device 80x30
[ 0.000000] console [tty0] enabled
[ 0.013976] Calibrating delay loop... 1816.98 BogoMIPS (lpj=9084928)
[ 0.076002] pid_max: default: 32768 minimum: 301
[ 0.079690] Mount-cache hash table entries: 512
[ 0.083983] Initializing cgroup subsys cpuacct
[ 0.087326] Initializing cgroup subsys memory
[ 0.090767] Initializing cgroup subsys devices
[ 0.094219] Initializing cgroup subsys freezer
[ 0.097455] Initializing cgroup subsys blkio
[ 0.101144] Initializing cgroup subsys perf_event
[ 0.104737] CPU: Testing write buffer coherency: ok
[ 0.109942] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.117065] hw perfevents: enabled with ARMv7 Cortex-A7 PMU driver, 5 counter s available
[ 0.122624] Setting up static identity map for 0x4057ef30 - 0x4057ef88
[ 0.238558] CPU1: Booted secondary processor
[ 0.297551] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.299556] Brought up 2 CPUs
[ 0.304910] SMP: Total of 2 processors activated (3640.52 BogoMIPS).
[ 0.308122] devtmpfs: initialized
[ 0.313884] dummy:
[ 0.317598] NET: Registered protocol family 16
[ 0.325494] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 0.330311] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.333510] [ccu-inf] aw clock manager init
[ 0.335794] [ccu-inf] aw_ccu_init
[ 0.339762] [ccu-inf] script config pll3 to 297MHz
[ 0.343528] [ccu-inf] script config pll4 to 300MHz
[ 0.347308] [ccu-inf] script config pll6 to 600MHz
[ 0.351070] [ccu-inf] script config pll7 to 297MHz
[ 0.354828] [ccu-inf] script config pll8 to 336MHz
[ 0.357603] Init eGon pin module V2.0
[ 0.365889] bio: create slab <bio-0> at 0
[ 0.369399] sunxi_gpio driver init ver 1.3
[ 0.375051] gpiochip_add: registered GPIOs 1 to 2 on device: A1X_GPIO
[ 0.378200] SCSI subsystem initialized
[ 0.381113] libata version 3.00 loaded.
[ 0.385779] usbcore: registered new interface driver usbfs
[ 0.390132] usbcore: registered new interface driver hub
[ 0.394329] usbcore: registered new device driver usb
[ 0.397431] Linux media interface: v0.10
[ 0.401062] Linux video capture interface: v2.00
[ 0.406670] Advanced Linux Sound Architecture Driver Version 1.0.25.
[ 0.412877] cfg80211: Calling CRDA to update world regulatory domain
[ 0.417484] Switching to clocksource arch_sys_counter
[ 0.419616] FS-Cache: Loaded
[ 0.421828] CacheFiles: Loaded
[ 0.455957] sw_hcd_host0 sw_hcd_host0: sw_hcd host driver
[ 0.462694] sw_hcd_host0 sw_hcd_host0: new USB bus registered, assigned bus n umber 1
[ 0.466196] hub 1-0:1.0: USB hub found
[ 0.469111] hub 1-0:1.0: 1 port detected
[ 0.473684] NET: Registered protocol family 2
[ 0.480052] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.487028] TCP established hash table entries: 131072 (order: 8, 1048576 byt es)
[ 0.494632] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
[ 0.501251] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.503474] TCP: reno registered
[ 0.508365] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.513727] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.517366] NET: Registered protocol family 1
[ 0.522703] RPC: Registered named UNIX socket transport module.
[ 0.526386] RPC: Registered udp transport module.
[ 0.530054] RPC: Registered tcp transport module.
[ 0.535484] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.538205] pm: select wifi: ap6210
[ 0.540956] ap6xxx: config 32k clock
[ 0.544174] [wifi_pm]: wifi gpio init is OK !!
[ 0.547137] [rfkill]: rfkill set power 0
[ 0.552287] audit: initializing netlink socket (disabled)
[ 0.556013] type=2000 audit(0.530:1): initialized
[ 0.560255] highmem bounce pool size: 64 pages
[ 0.572157] VFS: Disk quotas dquot_6.5.2
[ 0.577672] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.584510] NFS: Registering the id_resolver key type
[ 0.589171] NTFS driver 2.1.30 [Flags: R/W].
[ 0.592561] fuse init (API version 7.18)
[ 0.596049] msgmni has been set to 1074
[ 0.603712] alg: No test for stdrng (krng)
[ 0.610424] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 2 52)
[ 0.613366] io scheduler noop registered
[ 0.616603] io scheduler deadline registered
[ 0.620305] io scheduler cfq registered (default)
[ 0.625171] sunxi disp driver loaded (/dev/disp api 1.0)
[ 0.630712] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
[ 0.635282] [uart]: used uart info.: 0x05
[ 0.639996] [uart]: serial probe 0 irq 33 mapbase 0x01c28000
[ 0.666339] sunxi-uart.0: ttyS0 at MMIO 0x1c28000 (irq = 33) is a U6_16550A
<6>console [ttyS0] enabled
[ 1.426590] console [ttyS0] enabled
<6>[uart]: serial probe 2 irq 35 mapbase 0x01c28800
[ 1.434991] [uart]: serial probe 2 irq 35 mapbase 0x01c28800
<6>sunxi-uart.2: ttyS1 at MMIO 0x1c28800 (irq = 35) is a U6_16550A
[ 1.466905] sunxi-uart.2: ttyS1 at MMIO 0x1c28800 (irq = 35) is a U6_16550A
<7>G2D: drv_g2d_init
[ 1.476455] G2D: drv_g2d_init
<6>G2D: g2dmem: g2d_start=49000000, g2d_size=1000000
[ 1.484168] G2D: g2dmem: g2d_start=49000000, g2d_size=1000000
<6>G2D: head:c9000000,tail:ca000000
[ 1.493153] G2D: head:c9000000,tail:ca000000
<6>G2D: Module initialized.major:250
[ 1.500768] G2D: Module initialized.major:250
<6>brd: module loaded
[ 1.508179] brd: module loaded
<6>loop: module loaded
[ 1.517093] loop: module loaded
[NAND] nand driver version: 0x2 0x9
[ 1.523646] [NAND] nand driver version: 0x2 0x9
PHY_PageReadSpare : too much ecc err,bank 0 block 0,page 0
[ 1.593940] PHY_PageReadSpare : too much ecc err,bank 0 block 0,page 0
<4>Dev Sunxi softw311 nand magic does not match for MBR 1: softw411
[ 4.488681] Dev Sunxi softw311 nand magic does not match for MBR 1: softw411
<4>Dev Sunxi softw311 nand magic does not match for MBR 2:
[ 4.501785] Dev Sunxi softw311 nand magic does not match for MBR 2:
<4>Dev Sunxi softw311 nand magic does not match for MBR 3:
[ 4.514856] Dev Sunxi softw311 nand magic does not match for MBR 3:
<4>Dev Sunxi softw311 nand magic does not match for MBR 4:
[ 4.527918] Dev Sunxi softw311 nand magic does not match for MBR 4:
<4>Dev Sunxi softw311 nand header bad for all MBR copies, MBR corrupted or not p resent.
[ 4.542716] Dev Sunxi softw311 nand header bad for all MBR copies, MBR corrup ted or not present.
<4>Dev Sunxi softw411 nand mbr number does not match for MBR 2: 0
[ 4.558621] Dev Sunxi softw411 nand mbr number does not match for MBR 2: 0
<4>Dev Sunxi softw411 nand header: CRC bad for MBR 2
[ 4.570502] Dev Sunxi softw411 nand header: CRC bad for MBR 2
<4>Dev Sunxi softw411 nand mbr number does not match for MBR 3: 0
[ 4.583152] Dev Sunxi softw411 nand mbr number does not match for MBR 3: 0
<4>Dev Sunxi softw411 nand header: CRC bad for MBR 3
[ 4.594994] Dev Sunxi softw411 nand header: CRC bad for MBR 3
<4>Dev Sunxi softw411 nand mbr number does not match for MBR 4: 0
[ 4.607610] Dev Sunxi softw411 nand mbr number does not match for MBR 4: 0
<4>Dev Sunxi softw411 nand header: CRC bad for MBR 4
[ 4.619474] Dev Sunxi softw411 nand header: CRC bad for MBR 4
<4>Dev Sunxi softw411 nand: part 1, start 32768, size 131072
[ 4.630651] Dev Sunxi softw411 nand: part 1, start 32768, size 131072
<4>Dev Sunxi softw411 nand: part 2, start 163840, size 4194304
[ 4.642678] Dev Sunxi softw411 nand: part 2, start 163840, size 4194304
<4>Dev Sunxi softw411 nand: part 3, start 4358144, size 10682368
[ 4.655045] Dev Sunxi softw411 nand: part 3, start 4358144, size 10682368
<6> nand: nanda nandb nandc
[ 4.664377] nand: nanda nandb nandc
[NAND]nand driver, ok.
[ 4.671031] [NAND]nand driver, ok.
<6>sw_ahci sw_ahci.0: controller can't do PMP, turning off CAP_PMP
[ 4.680777] sw_ahci sw_ahci.0: controller can't do PMP, turning off CAP_PMP
<4>sw_ahci sw_ahci.0: forcing PORTS_IMPL to 0x1
[ 4.692073] sw_ahci sw_ahci.0: forcing PORTS_IMPL to 0x1
<6>sw_ahci sw_ahci.0: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform m ode
[ 4.704818] sw_ahci sw_ahci.0: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 imp l platform mode
<6>sw_ahci sw_ahci.0: flags: ncq sntf pm led clo only pio slum part ccc
[ 4.719720] sw_ahci sw_ahci.0: flags: ncq sntf pm led clo only pio slum part ccc
<6>scsi0 : sw_ahci_platform
[ 4.730604] scsi0 : sw_ahci_platform
<6>ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88
[ 4.741367] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x1 00 irq 88
<6>PPP generic driver version 2.4.2
[ 4.752774] PPP generic driver version 2.4.2
<6>PPP BSD Compression module registered
[ 4.760949] PPP BSD Compression module registered
<6>PPP Deflate Compression module registered
[ 4.769697] PPP Deflate Compression module registered
<6>PPP MPPE Compression module registered
[ 4.779694] PPP MPPE Compression module registered
<6>NET: Registered protocol family 24
[ 4.787943] NET: Registered protocol family 24
<6>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.798418] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
<6>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 4.810201] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[sw-ehci1]: open clock
[ 4.818827] [sw-ehci1]: open clock
[sw-ehci1]: Set USB Power ON
[ 4.844941] [sw-ehci1]: Set USB Power ON
<6>sw-ehci sw-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.855318] sw-ehci sw-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Dr iver
<6>sw-ehci sw-ehci.1: new USB bus registered, assigned bus number 2
[ 4.869033] sw-ehci sw-ehci.1: new USB bus registered, assigned bus number 2
<6>sw-ehci sw-ehci.1: irq 71, io mem 0x01c14000
[ 4.880489] sw-ehci sw-ehci.1: irq 71, io mem 0x01c14000
<6>sw-ehci sw-ehci.1: USB 2.0 started, EHCI 1.00
[ 4.901935] sw-ehci sw-ehci.1: USB 2.0 started, EHCI 1.00
<6>hub 2-0:1.0: USB hub found
[ 4.910699] hub 2-0:1.0: USB hub found
<6>hub 2-0:1.0: 1 port detected
[ 4.917346] hub 2-0:1.0: 1 port detected
[sw-ohci1]: open clock
[ 4.923884] [sw-ohci1]: open clock
<6>sw-ohci sw-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
[ 4.953446] sw-ohci sw-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
<6>sw-ohci sw-ohci.1: new USB bus registered, assigned bus number 3
[ 4.966865] sw-ohci sw-ohci.1: new USB bus registered, assigned bus number 3
<6>sw-ohci sw-ohci.1: irq 96, io mem 0x01c14400
[ 4.978246] sw-ohci sw-ohci.1: irq 96, io mem 0x01c14400
<6>hub 3-0:1.0: USB hub found
[ 5.044865] hub 3-0:1.0: USB hub found
<6>hub 3-0:1.0: 1 port detected
[ 5.051567] hub 3-0:1.0: 1 port detected
[sw-ehci2]: open clock
[ 5.058102] [sw-ehci2]: open clock
[sw-ehci2]: Set USB Power ON
[ 5.084221] [sw-ehci2]: Set USB Power ON
<6>sw-ehci sw-ehci.2: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
[ 5.094600] sw-ehci sw-ehci.2: SW< USB2.0 'Enhanced' Host Controller (EHCI) D river
6>ata1: SATA link down (SStatus 0 SControl 300)
[ 5.106406] ata1: SATA link down (SStatus 0 SControl 300)
<6>sw-ehci sw-ehci.2: new USB bus registered, assigned bus number 4
[ 5.118071] sw-ehci sw-ehci.2: new USB bus registered, assigned bus number 4
<6>sw-ehci sw-ehci.2: irq 72, io mem 0x01c1c000
[ 5.129504] sw-ehci sw-ehci.2: irq 72, io mem 0x01c1c000
<6>sw-ehci sw-ehci.2: USB 2.0 started, EHCI 1.00
[ 5.151976] sw-ehci sw-ehci.2: USB 2.0 started, EHCI 1.00
<6>hub 4-0:1.0: USB hub found
[ 5.160745] hub 4-0:1.0: USB hub found
<6>hub 4-0:1.0: 1 port detected
[ 5.167406] hub 4-0:1.0: 1 port detected
[sw-ohci2]: open clock
[ 5.173977] [sw-ohci2]: open clock
<6>sw-ohci sw-ohci.2: SW USB2.0 'Open' Host Controller (OHCI) Driver
[ 5.203534] sw-ohci sw-ohci.2: SW USB2.0 'Open' Host Controller (OHCI) Driver
<6>sw-ohci sw-ohci.2: new USB bus registered, assigned bus number 5
[ 5.216910] sw-ohci sw-ohci.2: new USB bus registered, assigned bus number 5
<6>sw-ohci sw-ohci.2: irq 97, io mem 0x01c1c400
[ 5.228284] sw-ohci sw-ohci.2: irq 97, io mem 0x01c1c400
<6>hub 5-0:1.0: USB hub found
[ 5.294885] hub 5-0:1.0: USB hub found
<6>hub 5-0:1.0: 1 port detected
[ 5.301577] hub 5-0:1.0: 1 port detected
<6>mousedev: PS/2 mouse device common for all mice
[ 5.310575] mousedev: PS/2 mouse device common for all mice
<6>input: sunxi-ir as /devices/virtual/input/input0
[ 5.321159] input: sunxi-ir as /devices/virtual/input/input0
IR Initial OK
[ 5.328354] IR Initial OK
===========================hv_keypad_init=====================
[ 5.336575] ===========================hv_keypad_init=====================
========HV Inital ===================
[ 5.346873] ========HV Inital ===================
<3>tkey_fetch_sysconfig_para: tkey_unused.
[ 5.355516] tkey_fetch_sysconfig_para: tkey_unused.
hv_keypad_init: after fetch_sysconfig_para: normal_i2c: 0x0. normal_i2c[1]: 0x0
[ 5.367704] hv_keypad_init: after fetch_sysconfig_para: normal_i2c: 0x0. nor mal_i2c[1]: 0x0
<4>rtc: get i2c master0 failed
[ 5.379153] rtc: get i2c master0 failed
<6>sunxi-rtc sunxi-rtc: rtc core: registered rtc as rtc0
[ 5.388566] sunxi-rtc sunxi-rtc: rtc core: registered rtc as rtc0
<6>i2c /dev entries driver
[ 5.397190] i2c /dev entries driver
config i2c gpio with gpio_config api
[ 5.404433] config i2c gpio with gpio_config api
<6>axp_mfd 0-0034: AXP (CHIP ID: 0x41) detected
[ 5.414786] axp_mfd 0-0034: AXP (CHIP ID: 0x41) detected
[AXP]axp driver uning configuration failed(340)
[ 5.425143] [AXP]axp driver uning configuration failed(340)
[AXP]power_start = 0
[ 5.432673] [AXP]power_start = 0
<4>i2c i2c-0: Invalid probe address 0x00
[ 5.439575] i2c i2c-0: Invalid probe address 0x00
<6>I2C: i2c-0: AW16XX I2C adapter
[ 5.447346] I2C: i2c-0: AW16XX I2C adapter
[ace_drv] start!!!
[ 5.453241] [ace_drv] start!!!
[ace_drv] init end!!!
[ 5.458670] [ace_drv] init end!!!
[pa_drv] start!!!
[ 5.463673] [pa_drv] start!!!
[pa_drv] init end!!!
[ 5.468889] [pa_drv] init end!!!
<6>axp20_ldo1: 1300 mV
[ 5.474495] axp20_ldo1: 1300 mV
<6>axp20_ldo2: 1800 <--> 3300 mV at 3000 mV
[ 5.482949] axp20_ldo2: 1800 <--> 3300 mV at 3000 mV
<6>axp20_ldo3: 700 <--> 3500 mV at 2800 mV
[ 5.493119] axp20_ldo3: 700 <--> 3500 mV at 2800 mV
<6>axp20_ldo4: 1250 <--> 3300 mV at 2800 mV
[ 5.503255] axp20_ldo4: 1250 <--> 3300 mV at 2800 mV
<6>axp20_buck2: 700 <--> 2275 mV at 1450 mV
[ 5.513468] axp20_buck2: 700 <--> 2275 mV at 1450 mV
<6>axp20_buck3: 700 <--> 3500 mV at 1300 mV
[ 5.523728] axp20_buck3: 700 <--> 3500 mV at 1300 mV
<6>axp20_ldoio0: 1800 <--> 3300 mV at 2800 mV
[ 5.533654] axp20_ldoio0: 1800 <--> 3300 mV at 2800 mV
<6>input: axp20-supplyer as /devices/platform/sunxi-i2c.0/i2c-0/0-0034/axp20-sup plyer.28/input/input1
[ 5.548437] input: axp20-supplyer as /devices/platform/sunxi-i2c.0/i2c-0/0-00 34/axp20-supplyer.28/input/input1
<4>axp20_ldo2: Failed to create debugfs directory
[ 5.576683] axp20_ldo2: Failed to create debugfs directory
<6>device-mapper: uevent: version 1.0.3
[ 5.587190] device-mapper: uevent: version 1.0.3
<6>device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat. com
[ 5.599663] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-d evel@redhat.com
<6>device-mapper: multipath: version 1.3.0 loaded
[ 5.613105] device-mapper: multipath: version 1.3.0 loaded
<6>device-mapper: multipath round-robin: version 1.0.0 loaded
[ 5.624111] device-mapper: multipath round-robin: version 1.0.0 loaded
<6>device-mapper: multipath queue-length: version 0.1.0 loaded
[ 5.636215] device-mapper: multipath queue-length: version 0.1.0 loaded
<6>device-mapper: multipath service-time: version 0.2.0 loaded
[ 5.648408] device-mapper: multipath service-time: version 0.2.0 loaded
<6>cpuidle: using governor ladder
[ 5.658486] cpuidle: using governor ladder
<6>cpuidle: using governor menu
[ 5.665499] cpuidle: using governor menu
<6>[mmc-msg] sw_mci_init
[ 5.671756] [mmc-msg] sw_mci_init
<6>[mmc-msg] MMC host used card: 0x9, boot card: 0x0, io_card 8
[ 5.680828] [mmc-msg] MMC host used card: 0x9, boot card: 0x0, io_card 8
<6>[mmc-msg] sdc0 set round clock 400000, src 24000000
[ 5.692863] [mmc-msg] sdc0 set round clock 400000, src 24000000
<6>[mmc-msg] sdc0 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(S DR12) dt B
[ 5.707050] [mmc-msg] sdc0 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 tim ing LEGACY(SDR12) dt B
<6>[mmc-msg] sdc0 Probe: base:0xf00d4000 irq:64 sg_cpu:ffdf7000(4fc00000) ret 0.
[ 5.724343] [mmc-msg] sdc0 Probe: base:0xf00d4000 irq:64 sg_cpu:ffdf7000(4fc0 0000) ret 0.
<6>[mmc-msg] sdc3 set round clock 400000, src 24000000
[ 5.737538] [mmc-msg] sdc3 set round clock 400000, src 24000000
<6>[mmc-msg] sdc3 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(S DR12) dt B
[ 5.751659] [mmc-msg] sdc3 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 tim ing LEGACY(SDR12) dt B
<6>[mmc-msg] sdc3 Probe: base:0xf00d6000 irq:67 sg_cpu:ffddf000(4fc01000) ret 0.
[ 5.768909] [mmc-msg] sdc3 Probe: base:0xf00d6000 irq:67 sg_cpu:ffddf000(4fc0 1000) ret 0.
[mmc_pm]: failed to fetch sdio card configuration!
[ 5.781675] [mmc_pm]: failed to fetch sdio card configuration!
<6>sunxi_leds driver init
[ 5.789882] sunxi_leds driver init
<7>Registered led device: blue:ph21:led1
[ 5.797305] Registered led device: blue:ph21:led1
<7>Registered led device: orange:ph20:led2
[ 5.805951] Registered led device: orange:ph20:led2
<7>Registered led device: white:ph11:led3
[ 5.814674] Registered led device: white:ph11:led3
<7>Registered led device: green:ph07:led4
[ 5.823321] Registered led device: green:ph07:led4
<6>ledtrig-cpu: registered to indicate activity on CPUs
[ 5.833187] ledtrig-cpu: registered to indicate activity on CPUs
<6>usbcore: registered new interface driver usbhid
[ 5.844359] usbcore: registered new interface driver usbhid
<6>usbhid: USB HID core driver
[ 5.852752] usbhid: USB HID core driver
<6>ashmem: initialized
[ 5.859265] ashmem: initialized
<6>logger: created 256K log 'log_main'
[ 5.866070] logger: created 256K log 'log_main'
<6>logger: created 256K log 'log_events'
[ 5.874397] logger: created 256K log 'log_events'
<6>logger: created 256K log 'log_radio'
[ 5.882826] logger: created 256K log 'log_radio'
<6>logger: created 256K log 'log_system'
[ 5.891247] logger: created 256K log 'log_system'
<6>IPv4 over IPv4 tunneling driver
[ 5.901306] IPv4 over IPv4 tunneling driver
<6>TCP: bic registered
[ 5.908287] TCP: bic registered
<6>TCP: cubic registered
[ 5.913754] TCP: cubic registered
<6>TCP: westwood registered
[ 5.919600] TCP: westwood registered
<6>TCP: highspeed registered
[ 5.925805] TCP: highspeed registered
<6>TCP: hybla registered
[ 5.931778] TCP: hybla registered
<6>TCP: htcp registered
[ 5.937276] TCP: htcp registered
<6>TCP: vegas registered
[ 5.942789] TCP: vegas registered
<6>TCP: veno registered
[ 5.948286] TCP: veno registered
<6>TCP: scalable registered
[ 5.954056] TCP: scalable registered
<6>TCP: lp registered
[ 5.959650] TCP: lp registered
<6>TCP: yeah registered
[ 5.964887] TCP: yeah registered
<6>TCP: illinois registered
[ 5.970653] TCP: illinois registered
<6>Initializing XFRM netlink socket
[ 5.977450] Initializing XFRM netlink socket
<6>NET: Registered protocol family 10
[ 5.985829] NET: Registered protocol family 10
<6>NET: Registered protocol family 17
[ 5.994682] NET: Registered protocol family 17
<6>NET: Registered protocol family 15
[ 6.002618] NET: Registered protocol family 15
<5>Registering the dns_resolver key type
[ 6.010769] Registering the dns_resolver key type
<6>VFP support v0.3: [ 6.017561] VFP support v0.3: implementor 41 architectur e 2 part 30 variant 7 rev 4
implementor 41 architecture 2 part 30 variant 7 rev 4
<5>Registering SWP/SWPB emulation handler
[ 6.033819] Registering SWP/SWPB emulation handler
<4>axp20_buck2: Failed to create debugfs directory
[ 6.043246] axp20_buck2: Failed to create debugfs directory
<6>[cpu_freq] INF:-------------------V-F Table-------------------
[ 6.055014] [cpu_freq] INF:-------------------V-F Table-------------------
<6>[cpu_freq] INF: voltage = 1450mv frequency = 1008MHz
[ 6.067003] [cpu_freq] INF: voltage = 1450mv frequency = 1008MHz
<6>[cpu_freq] INF: voltage = 1425mv frequency = 912MHz
[ 6.078161] [cpu_freq] INF: voltage = 1425mv frequency = 912MHz
<6>[cpu_freq] INF: voltage = 1350mv frequency = 864MHz
[ 6.089322] [cpu_freq] INF: voltage = 1350mv frequency = 864MHz
<6>[cpu_freq] INF: voltage = 1250mv frequency = 720MHz
[ 6.100476] [cpu_freq] INF: voltage = 1250mv frequency = 720MHz
<6>[cpu_freq] INF: voltage = 1150mv frequency = 528MHz
[ 6.111629] [cpu_freq] INF: voltage = 1150mv frequency = 528MHz
<6>[cpu_freq] INF: voltage = 1100mv frequency = 312MHz
[ 6.122772] [cpu_freq] INF: voltage = 1100mv frequency = 312MHz
<6>[cpu_freq] INF: voltage = 1050mv frequency = 144MHz
[ 6.133929] [cpu_freq] INF: voltage = 1050mv frequency = 144MHz
<6>[cpu_freq] INF: voltage = 1000mv frequency = 0MHz
[ 6.145078] [cpu_freq] INF: voltage = 1000mv frequency = 0MHz
<6>[cpu_freq] INF:-----------------------------------------------
[ 6.157004] [cpu_freq] INF:-----------------------------------------------
<6>[cpu_freq] INF:sunxi_cpufreq_initcall, get cpu frequency from sysconfig, max freq: 912MHz, min freq: 720MHz
[ 6.173624] [cpu_freq] INF:sunxi_cpufreq_initcall, get cpu frequency from sys config, max freq: 912MHz, min freq: 720MHz
<6>registered taskstats version 1
[ 6.188173] registered taskstats version 1
<4>[DISP] Unsupported mode: 800x600p50, ignoring
[ 6.197875] [DISP] Unsupported mode: 800x600p50, ignoring
<6>I2C: i2c-1: HDMI I2C adapter
[ 6.206815] I2C: i2c-1: HDMI I2C adapter
<6>ParseEDID
[ 6.238792] ParseEDID
<6>EDID version: 1.3
[ 6.255752] EDID version: 1.3
<6>PCLK=50250000 X 1024 1068 1156 1344 Y 600 603 609 625 fr 59 PN
[ 6.264568] PCLK=50250000 X 1024 1068 1156 1344 Y 600 603 609 625 fr 59 PN
<6>Using above mode as preferred EDID mode
[ 6.275290] Using above mode as preferred EDID mode
<4>Unimplemented SVD code 21
[ 6.296510] Unimplemented SVD code 21
<4>Unimplemented SVD code 22
[ 6.302809] Unimplemented SVD code 22
<4>Unimplemented SVD code 17
[ 6.309087] Unimplemented SVD code 17
<4>Unimplemented SVD code 4
[ 6.315292] Unimplemented SVD code 4
<4>Unimplemented SVD code 31
[ 6.321494] Unimplemented SVD code 31
<4>Unimplemented SVD code 16
[ 6.327771] Unimplemented SVD code 16
<4>disp_clk: Could not find a matching pll-freq for 53900000 pclk
[ 6.337297] disp_clk: Could not find a matching pll-freq for 53900000 pclk
<4>disp_clk: Could not find a matching pll-freq for 53900000 pclk
[ 6.350011] disp_clk: Could not find a matching pll-freq for 53900000 pclk
<4>disp_clk: Could not find a matching pll-freq for 108100000 pclk
[ 6.362808] disp_clk: Could not find a matching pll-freq for 108100000 pclk
<4>disp_clk: Could not find a matching pll-freq for 72650000 pclk
[ 6.375608] disp_clk: Could not find a matching pll-freq for 72650000 pclk
<4>disp_clk: Could not find a matching pll-freq for 74200000 pclk
[ 6.388319] disp_clk: Could not find a matching pll-freq for 74200000 pclk
<4>disp_clk: Could not find a matching pll-freq for 78800000 pclk
[ 6.401032] disp_clk: Could not find a matching pll-freq for 78800000 pclk
<4>disp_clk: Could not find a matching pll-freq for 53450000 pclk
[ 6.413746] disp_clk: Could not find a matching pll-freq for 53450000 pclk
<4>disp_clk: Could not find a matching pll-freq for 26150000 pclk
[ 6.426462] disp_clk: Could not find a matching pll-freq for 26150000 pclk
<6>Parse_VideoData_Block: VIC 6 support
[ 6.436930] Parse_VideoData_Block: VIC 6 support
<6>Parse_VideoData_Block: VIC 7 support
[ 6.445128] Parse_VideoData_Block: VIC 7 support
<6>Parse_VideoData_Block: VIC 2 support
[ 6.453326] Parse_VideoData_Block: VIC 2 support
<6>Parse_VideoData_Block: VIC 3 support
[ 6.461523] Parse_VideoData_Block: VIC 3 support
<6>Parse_VideoData_Block: VIC 21 support
[ 6.469795] Parse_VideoData_Block: VIC 21 support
<6>Parse_VideoData_Block: VIC 22 (native) support
[ 6.478945] Parse_VideoData_Block: VIC 22 (native) support
<6>Parse_VideoData_Block: VIC 17 support
[ 6.488098] Parse_VideoData_Block: VIC 17 support
<6>Parse_VideoData_Block: VIC 18 support
[ 6.496469] Parse_VideoData_Block: VIC 18 support
<6>Parse_VideoData_Block: VIC 19 support
[ 6.504839] Parse_VideoData_Block: VIC 19 support
<6>Parse_VideoData_Block: VIC 4 support
[ 6.513122] Parse_VideoData_Block: VIC 4 support
<6>Parse_VideoData_Block: VIC 20 support
[ 6.521406] Parse_VideoData_Block: VIC 20 support
<6>Parse_VideoData_Block: VIC 5 support
[ 6.529678] Parse_VideoData_Block: VIC 5 support
<6>Parse_VideoData_Block: VIC 31 support
[ 6.537966] Parse_VideoData_Block: VIC 31 support
<6>Parse_VideoData_Block: VIC 16 (native) support
[ 6.547117] Parse_VideoData_Block: VIC 16 (native) support
<6>Parse_AudioData_Block: max channel=2
[ 6.556183] Parse_AudioData_Block: max channel=2
<6>Parse_AudioData_Block: SampleRate code=7
[ 6.564726] Parse_AudioData_Block: SampleRate code=7
<6>Parse_AudioData_Block: WordLen code=7
[ 6.573357] Parse_AudioData_Block: WordLen code=7
<6>Find HDMI Vendor Specific DataBlock
[ 6.581552] Find HDMI Vendor Specific DataBlock
<6>PCLK=27000000 X 720 732 796 864 Y 576 581 586 625 fr 50 NN
[ 6.591565] PCLK=27000000 X 720 732 796 864 Y 576 581 586 625 fr 50 NN
<6>PCLK=74250000 X 1920 2008 2052 2200 Y 540 542 547 562 fr 60 PP
[ 6.603934] PCLK=74250000 X 1920 2008 2052 2200 Y 540 542 547 562 fr 60 PP
<6>PCLK=74250000 X 1920 2448 2492 2640 Y 540 542 547 562 fr 50 PP
[ 6.616648] PCLK=74250000 X 1920 2448 2492 2640 Y 540 542 547 562 fr 50 PP
<6>PCLK=74250000 X 1280 1720 1760 1980 Y 720 725 730 750 fr 50 PP
[ 6.629362] PCLK=74250000 X 1280 1720 1760 1980 Y 720 725 730 750 fr 50 PP
<6>PCLK=148500000 X 1920 2448 2492 2640 Y 1080 1084 1089 1125 fr 50 PP
[ 6.642509] PCLK=148500000 X 1920 2448 2492 2640 Y 1080 1084 1089 1125 fr 50 PP
<6>asoc: sndhdmi <-> sunxi-hdmiaudio.0 mapping ok
[ 6.655362] asoc: sndhdmi <-> sunxi-hdmiaudio.0 mapping ok
<6>waited 0 ms for EDID info
[ 6.664427] waited 0 ms for EDID info
<6>disp clks: lcd 50250000 pre_scale 1 hdmi 50250000 pll 201000000 2x 0
[ 6.674485] disp clks: lcd 50250000 pre_scale 1 hdmi 50250000 pll 201000000 2 x 0
<6>Console: switching to colour frame buffer device 128x37
[ 7.075153] Console: switching to colour frame buffer device 128x37
<4>axp20_buck3: incomplete constraints, leaving on
[ 7.099565] axp20_buck3: incomplete constraints, leaving on
<4>axp20_buck2: incomplete constraints, leaving on
[ 7.110102] axp20_buck2: incomplete constraints, leaving on
<4>axp20_ldo4: incomplete constraints, leaving on
[ 7.122875] axp20_ldo4: incomplete constraints, leaving on
<4>axp20_ldo3: incomplete constraints, leaving on
[ 7.135511] axp20_ldo3: incomplete constraints, leaving on
<4>axp20_ldo2: incomplete constraints, leaving on
[ 7.148125] axp20_ldo2: incomplete constraints, leaving on
<6>console [netcon0] enabled
[ 7.159353] console [netcon0] enabled
<6>netconsole: network logging started
[ 7.169047] netconsole: network logging started
<6>sunxi-rtc sunxi-rtc: setting system clock to 2010-01-01 00:07:37 UTC (1262304 457)
[ 7.183671] sunxi-rtc sunxi-rtc: setting system clock to 2010-01-01 00:07:37 UTC (1262304457)
<6>ALSA device list:
[ 7.197012] ALSA device list:
<6> #0: sunxi-CODEC Audio Codec
[ 7.205832] #0: sunxi-CODEC Audio Codec
<6> #1: sunxi-sndhdmi
[ 7.214893] #1: sunxi-sndhdmi
<6>EXT4-fs (nandb): recovery complete
[ 7.755148] EXT4-fs (nandb): recovery complete
<6>EXT4-fs (nandb): mounted filesystem with ordered data mode. Opts: discard
[ 7.769606] EXT4-fs (nandb): mounted filesystem with ordered data mode. Opts: discard
<6>VFS: Mounted root (ext4 filesystem) on device 93:2.
[ 7.785548] VFS: Mounted root (ext4 filesystem) on device 93:2.
<6>devtmpfs: mounted
[ 7.797940] devtmpfs: mounted
<6>Freeing init memory: 212K
[ 7.807083] Freeing init memory: 212K
<6>Write protecting the kernel text section c0008000 - c07c7000
[ 7.819672] Write protecting the kernel text section c0008000 - c07c7000
<4>init: ureadahead main process (69) terminated with status 5
[ 9.806081] init: ureadahead main process (69) terminated with status 5
<30>systemd-udevd[192]: starting version 204
pwm-sunxi: pwm0 configured - period: 20, duty_percent: 50, duty: 10
<4>eth%d: device MAC address 46:69:1b:62:16:f9
[gmac]: sun6i_gmac platform driver registration completedUMP<2>: Inserting UMP d evice driver. Compiled: Oct 26 2013, time: 13:03:48
UMP<2>: Using OS memory backend, allocation limit: 134217728
UMP: UMP device driver loaded
Mali: permit MALI_IOC_MEM_MAP_EXT ioctl for framebuffer (paddr=0x5A000000, size= 33554432)
<6>mali: use config clk_div 1
<6>mali: clk_div 1
Mali: mali clock set completed, clock is 312000000 Hz
<6>mali: use config clk_div 1
<6>mali: clk_div 1
Mali: mali clock set completed, clock is 312000000 Hz
Mali: Mali device driver loaded
<4>init: plymouth main process (79) killed by ABRT signal
<4>init: plymouth-splash main process (267) terminated with status 2
<6>EXT4-fs (nandc): mounted filesystem with ordered data mode. Opts: block_valid ity
<6>sunxi_gmac: probed
<6>eth0: PHY ID 001cc915 at 0 IRQ 0 (sunxi_gmac-0:00) active
<6>eth0: PHY ID 001cc915 at 1 IRQ 0 (sunxi_gmac-0:01)
<6>PHY: sunxi_gmac-0:00 - Link is Up<c> - 1000/Full<c>
<7>eth0: no IPv6 routers present
Raw
uboot
▒HELLO! BOOT0 is starting!
boot0 version : 2.0.0▒
read dram para.
dram driver version: 1.15
dram size =2048MB
0xffffffff
super_standby_flag = 0
Succeed in opening nand flash.
block from 2 to 6
deal block 2
Succeed in reading Boot1 file head.
The size of Boot1 is 0x00068000.
The file stored in 0x00000000 of block 2 is perfect.
Check is correct.
Ready to disable icache.
Succeed in loading Boot1.
Jump to Boot1.
[ 0.145] boot1 version : 2.0.0
[ 0.145] script installed early ok
[ 0.146] pmu type = 3
[ 0.250] bat vol = 0 mv
[ 0.264] axi:ahb:apb=4:2:2
[ 0.264] set dcdc2=1450mv, clock=912M successed
[ 0.266] key
[ 0.279] no key found
[ 0.279] flash init start
[ 0.279] NB1 : enter NFB_Init
[ 0.282] NB1 : enter phy init
[ 0.285] [NAND] nand driver(b) version: 0x0x00000002, 0x0x00000012, data: 0x20130627
[ 0.293] get the good blk ratio from hwscan : 912
[ 0.298] NB1 : nand phy init ok
[ 1.667] _RepairLogBlkTbl start
[ 1.669] Log Block Index 0x00000000, LogicBlockNum: 0x0000001a, LogBlockTy pe: 0x00000000
[ 1.673] log0: 0x00000618, Log1: 0x0000ffff, WriteIndex: 0x00000000
[ 1.680] datablock: 0x0000067b, lastusedpage: 0x00000011
[ 1.688] Log Block Index 0x00000001, LogicBlockNum: 0x00000016, LogBlockTy pe: 0x00000000
[ 1.694] log0: 0x0000063c, Log1: 0x0000ffff, WriteIndex: 0x00000000
[ 1.701] datablock: 0x00000684, lastusedpage: 0x00000009
[ 1.708] Log Block Index 0x00000002, LogicBlockNum: 0x00000018, LogBlockTy pe: 0x00000000
[ 1.715] log0: 0x000006b0, Log1: 0x0000ffff, WriteIndex: 0x00000000
[ 1.721] datablock: 0x000006f8, lastusedpage: 0x00000018
[ 1.729] Log Block Index 0x00000003, LogicBlockNum: 0x00000036, LogBlockTy pe: 0x00000000
[ 1.735] log0: 0x00000785, Log1: 0x0000ffff, WriteIndex: 0x00000000
[ 1.742] datablock: 0x00000681, lastusedpage: 0x00000089
[ 1.749] Log Block Index 0x00000004, LogicBlockNum: 0x00000214, LogBlockTy pe: 0x00000000
[ 1.756] log0: 0x0000064e, Log1: 0x0000ffff, WriteIndex: 0x00000000
[ 1.762] datablock: 0x000007a9, lastusedpage: 0x00000015
[ 1.770] Log Block Index 0x00000005, LogicBlockNum: 0x00000054, LogBlockTy pe: 0x00000000
[ 1.776] log0: 0x000007bb, Log1: 0x0000ffff, WriteIndex: 0x00000000
[ 1.783] datablock: 0x000007bf, lastusedpage: 0x000000cf
[ 1.791] Log Block Index 0x00000006, LogicBlockNum: 0x00000161, LogBlockTy pe: 0x00000000
[ 1.797] log0: 0x000007d5, Log1: 0x0000ffff, WriteIndex: 0x00000000
[ 1.804] datablock: 0x0000076d, lastusedpage: 0x0000008a
[ 1.811] Log Block Index 0x00000007, LogicBlockNum: 0x00000015, LogBlockTy pe: 0x00000000
[ 1.818] log0: 0x000007e3, Log1: 0x0000ffff, WriteIndex: 0x00000000
[ 1.824] datablock: 0x0000071c, lastusedpage: 0x000000c3
[ 1.832] Log Block Index 0x00000008, LogicBlockNum: 0x00000151, LogBlockTy pe: 0x00000000
[ 1.838] log0: 0x000007e7, Log1: 0x0000ffff, WriteIndex: 0x00000000
[ 1.845] datablock: 0x00000721, lastusedpage: 0x00000048
[ 1.853] Log Block Index 0x00000009, LogicBlockNum: 0x00000055, LogBlockTy pe: 0x00000000
[ 1.859] log0: 0x00000689, Log1: 0x0000ffff, WriteIndex: 0x00000000
[ 1.866] datablock: 0x000007ea, lastusedpage: 0x0000008f
[ 1.873] Log Block Index 0x0000000a, LogicBlockNum: 0x00000006, LogBlockTy pe: 0x00000000
[ 1.880] log0: 0x000007f1, Log1: 0x0000ffff, WriteIndex: 0x00000000
[ 1.886] datablock: 0x00000009, lastusedpage: 0x00000003
[ 1.894] Log Block Index 0x0000000b, LogicBlockNum: 0x00000034, LogBlockTy pe: 0x00000000
[ 1.900] log0: 0x000007f4, Log1: 0x0000ffff, WriteIndex: 0x00000000
[ 1.907] datablock: 0x0000072d, lastusedpage: 0x00000011
[ 1.914] Log Block Index 0x0000000c, LogicBlockNum: 0x00000014, LogBlockTy pe: 0x00000000
[ 1.921] log0: 0x000007f5, Log1: 0x0000ffff, WriteIndex: 0x00000000
[ 1.927] datablock: 0x000007ce, lastusedpage: 0x000000b5
[ 1.935] Log Block Index 0x0000000d, LogicBlockNum: 0x00000035, LogBlockTy pe: 0x00000000
[ 1.941] log0: 0x000007d4, Log1: 0x0000ffff, WriteIndex: 0x00000000
[ 1.948] datablock: 0x000007f8, lastusedpage: 0x00000003
[ 1.956] Log Block Index 0x0000000e, LogicBlockNum: 0x00000114, LogBlockTy pe: 0x00000000
[ 1.962] log0: 0x000007e0, Log1: 0x0000ffff, WriteIndex: 0x00000000
[ 1.969] datablock: 0x000007fb, lastusedpage: 0x00000008
[ 1.976] Log Block Index 0x0000000f, LogicBlockNum: 0x00000004, LogBlockTy pe: 0x00000000
[ 1.983] log0: 0x000007df, Log1: 0x0000ffff, WriteIndex: 0x00000000
[ 1.989] datablock: 0x000007fe, lastusedpage: 0x00000015
[ 1.997] Log Block Index 0x00000000, LogicBlockNum: 0x00000280, LogBlockTy pe: 0x00000000
[ 2.003] log0: 0x00000575, Log1: 0x0000ffff, WriteIndex: 0x00000000
[ 2.010] datablock: 0x000003a2, lastusedpage: 0x00000001
[ 2.018] Log Block Index 0x00000001, LogicBlockNum: 0x00000281, LogBlockTy pe: 0x00000000
[ 2.024] log0: 0x00000576, Log1: 0x0000ffff, WriteIndex: 0x00000000
[ 2.031] datablock: 0x000003a4, lastusedpage: 0x00000002
[ 2.038] Log Block Index 0x00000002, LogicBlockNum: 0x0000027f, LogBlockTy pe: 0x00000000
[ 2.045] log0: 0x0000068b, Log1: 0x0000ffff, WriteIndex: 0x00000000
[ 2.051] datablock: 0x0000068c, lastusedpage: 0x00000002
[ 2.059] Log Block Index 0x00000003, LogicBlockNum: 0x00000084, LogBlockTy pe: 0x00000000
[ 2.065] log0: 0x00000690, Log1: 0x0000ffff, WriteIndex: 0x00000000
[ 2.072] datablock: 0x00000691, lastusedpage: 0x00000002
[ 2.079] Log Block Index 0x00000004, LogicBlockNum: 0x00000085, LogBlockTy pe: 0x00000000
[ 2.086] log0: 0x00000692, Log1: 0x0000ffff, WriteIndex: 0x00000000
[ 2.092] datablock: 0x00000379, lastusedpage: 0x000000fd
[ 2.100] Log Block Index 0x00000005, LogicBlockNum: 0x00000282, LogBlockTy pe: 0x00000000
[ 2.106] log0: 0x00000696, Log1: 0x0000ffff, WriteIndex: 0x00000000
[ 2.113] datablock: 0x00000577, lastusedpage: 0x00000082
[ 2.121] Log Block Index 0x00000006, LogicBlockNum: 0x00000080, LogBlockTy pe: 0x00000000
[ 2.127] log0: 0x000006a4, Log1: 0x0000ffff, WriteIndex: 0x00000000
[ 2.134] datablock: 0x000006a6, lastusedpage: 0x00000001
[ 2.141] Log Block Index 0x00000007, LogicBlockNum: 0x0000007f, LogBlockTy pe: 0x00000000
[ 2.148] log0: 0x000006ab, Log1: 0x0000ffff, WriteIndex: 0x00000000
[ 2.154] datablock: 0x000006ad, lastusedpage: 0x00000002
[ 2.162] Log Block Index 0x00000008, LogicBlockNum: 0x000000ba, LogBlockTy pe: 0x00000000
[ 2.168] log0: 0x000006bc, Log1: 0x0000ffff, WriteIndex: 0x00000000
[ 2.175] datablock: 0x000006bf, lastusedpage: 0x00000001
[ 2.183] Log Block Index 0x00000009, LogicBlockNum: 0x000000b7, LogBlockTy pe: 0x00000000
[ 2.189] log0: 0x000006c8, Log1: 0x0000ffff, WriteIndex: 0x00000000
[ 2.196] datablock: 0x000006cc, lastusedpage: 0x00000001
[ 2.203] Log Block Index 0x0000000a, LogicBlockNum: 0x0000009e, LogBlockTy pe: 0x00000000
[ 2.210] log0: 0x0000071b, Log1: 0x0000ffff, WriteIndex: 0x00000000
[ 2.216] datablock: 0x0000071e, lastusedpage: 0x000000b3
[ 2.224] Log Block Index 0x0000000b, LogicBlockNum: 0x000001de, LogBlockTy pe: 0x00000000
[ 2.230] log0: 0x00000723, Log1: 0x0000ffff, WriteIndex: 0x00000000
[ 2.237] datablock: 0x000004d3, lastusedpage: 0x00000004
[ 2.244] Log Block Index 0x0000000c, LogicBlockNum: 0x0000019e, LogBlockTy pe: 0x00000000
[ 2.251] log0: 0x00000726, Log1: 0x0000ffff, WriteIndex: 0x00000000
[ 2.257] datablock: 0x00000492, lastusedpage: 0x00000004
[ 2.264] Log Block Index 0x0000000d, LogicBlockNum: 0x0000027e, LogBlockTy pe: 0x00000000
[ 2.271] log0: 0x0000072f, Log1: 0x0000ffff, WriteIndex: 0x00000000
[ 2.278] datablock: 0x00000573, lastusedpage: 0x000000fd
[ 2.285] Log Block Index 0x0000000e, LogicBlockNum: 0x0000007e, LogBlockTy pe: 0x00000000
[ 2.292] log0: 0x00000733, Log1: 0x0000ffff, WriteIndex: 0x00000000
[ 2.299] datablock: 0x00000372, lastusedpage: 0x000000fd
[ 2.304] _RepairLogBlkTbl end
[ 2.325] NB1 : init ok
[ 2.325] flash init finish
[ 2.327] fs init ok
[ 2.329] fattype FAT16
[ 2.330] fs mount ok
[ 2.334] nand good_block_ratio=912
[ 2.336] storage_type=0
[ 2.349] 0
[ 2.350] set pc
[ 2.350] usbdc_vol = 4000, usbdc_cur = 0
[ 2.352] usbpc_vol = 4200, usbpc_cur = 0
[ 2.356] init to usb pc
[ 2.359] set pc
[ 2.439] lcd 0 timeout=50
[ 2.440] key value = 0
[ 2.440] recovery key high 40, low 4
[ 2.457] show pic finish
[ 2.457] load kernel start
[ 2.473] load kernel successed
[ 2.473] start address = 0x4a000000
[ 2.490] lcd 1 timeout=50
[ 2.540] lcd 2 timeout=200
[ 2.740] lcd 3 timeout=0
[ 2.740] lcd 4 timeout=0
[ 2.781] power exit detect
U-Boot 2011.09-rc1-00000-gf75abad-dirty (Oct 21 2013 - 18:44:22) Allwinner Techn ology
CPU: SUNXI Family
Board: A20-Cubietruck
DRAM: 2 GiB
NAND: NB1 : enter NFB_Init
[NAND] nand driver(b) version: 0x2, 0x12, data: 20130526
[NAND] set nand_good_block_ratio 912
NB1 : nand phy init ok
NB1 : init ok
3200 MiB
Using default environment
In: serial
Out: serial
Err: serial
--------fastboot partitions--------
-total partitions:3-
-name- -start- -size-
bootloader : 8000 20000
rootfs : 28000 400000
UDISK : 428000 218000
-----------------------------------
no misc partition is found
Hit any key to stop autoboot: 0
** File not found /boot/uEnv.txt **
reading /uEnv.txt
197 bytes read
## Warning: defaulting to text format
** File not found /boot/script.bin **
reading /script.bin
46240 bytes read
** File not found /boot/uImage **
reading /uImage
4590008 bytes read
## Booting kernel from Legacy Image at 48000000 ...
Image Name: Linux-3.4.61+
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 4589944 Bytes = 4.4 MiB
Load Address: 40008000
Entry Point: 40008000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK
Using machid 0x10bb from environment
Starting kernel ...
Raw
uboot-env
baudrate=115200
boot_fastboot=fastboot
boot_normal=bootm 48000000
boot_recovery=sunxi_flash read 40007800 recovery;boota 40007800
bootcmd=run setargs_nand boot_normal
bootdelay=1
bootenv=/uEnv.txt
console=ttyS0,115200
kernel=/uImage
kerneladdr=0x48000000
loadbootenv=mw 41000000 0 10000;ext4load nand 2:0 $scriptaddr /boot${bootenv} || fatload nand 0:0 $scriptaddr ${bootenv};env import 41000000 10000;setenv bootargs console=${console} root=${nand_root} loglevel=${loglevel} ${extraargs}
loadkernel=ext4load nand 2:0 $kerneladdr /boot${kernel} || fatload nand 0:0 $kerneladdr ${kernel}
loadscriptbin=ext4load nand 2:0 $scriptbinaddr /boot${scriptbin} || fatload nand 0:0 $scriptbinaddr ${scriptbin}
loglevel=8
nand_root=/dev/nand3
partitions=bootloader@nanda:rootfs@nandb:UDISK@nandc
scriptaddr=0x41000000
scriptbin=/script.bin
scriptbinaddr=0x43000000
setargs_nand=run loadbootenv loadscriptbin loadkernel setmachid
setmachid=setenv machid 10bb
stderr=serial
stdin=serial
stdout=serial
Environment size: 1037/131068 bytes
@FlorianHeigl
Copy link
Author

FlorianHeigl commented Nov 2, 2025 •
edited
Loading

no sata in allwinner u-boot?

sun7i# mmcinfo
Device: SUNXI SD/MMC
Manufacturer ID: 3
OEM: 5344
Name: SU16G
Tran Speed: 50000000
Rd Block Len: 512
SD version 3.0
High Capacity: Yes
Capacity: 14.8 GiB
Bus Width: 4-bit

**sun7i# help
?       - alias for 'help'
base    - print or set address offset
bdinfo  - print Board Info structure
boot    - boot default, i.e., run 'bootcmd'
bootd   - boot default, i.e., run 'bootcmd'
bootelf - Boot from an ELF image in memory
bootm   - boot application image from memory
bootp   - boot image via network using BOOTP/TFTP protocol
bootvx  - Boot vxWorks from an ELF image
bootz   - boot Linux zImage image from memory
cmp     - memory compare
coninfo - print console devices and information
cp      - memory copy
crc32   - checksum calculation
dhcp    - boot image via network using DHCP/TFTP protocol
dns     - lookup the IP of a hostname
echo    - echo args to console
editenv - edit environment variable
env     - environment handling commands
exit    - exit script
ext2load- load binary file from a Ext2 filesystem
ext2ls  - list files in a directory (default /)
ext4load- load binary file from a Ext4 filesystem
ext4ls  - list files in a directory (default /)
false   - do nothing, unsuccessfully
fatinfo - print information about filesystem
fatload - load binary file from a dos filesystem
fatls   - list files in a directory (default /)
fatwrite- write file into a dos filesystem
fdt     - flattened device tree utility commands
go      - start application at address 'addr'
gpio    - input/set/clear/toggle gpio pins
help    - print command description/usage
i2c     - I2C sub-system
iminfo  - print header information for application image
imxtract- extract a part of a multi-image
itest   - return true/false on integer compare
led     - [0|1|2|3|all] [on|off|toggle]
loadb   - load binary file over serial line (kermit mode)
loads   - load S-Record file over serial line
loadx   - load binary file over serial line (xmodem mode)
loady   - load binary file over serial line (ymodem mode)
loop    - infinite loop on address range
md      - memory display
mii     - MII utility commands
mm      - memory modify (auto-incrementing address)
mmc     - MMC sub system
mmcinfo - display MMC info
mw      - memory write (fill)
nfs     - boot image via network using NFS protocol
nm      - memory modify (constant address)
ping    - send ICMP ECHO_REQUEST to network host
printenv- print environment variables
reset   - Perform RESET of the CPU
run     - run commands in an environment variable
saveenv - save environment variables to persistent storage
setenv  - set environment variables
setexpr - set environment variable as the result of eval expression
showvar - print local hushshell variables
sleep   - delay execution for some time
sntp    - synchronize RTC via network
source  - run script from memory
test    - minimal test like /bin/sh
tftpboot- boot image via network using TFTP protocol
true    - do nothing, successfully
version - print monitor, compiler and linker version

sun7i# bdinfo
arch_number = 0x000010BB
boot_params = 0x40000100
DRAM bank   = 0x00000000
-> start    = 0x40000000
-> size     = 0x80000000
eth0name    = emac
ethaddr     = (not set)
current eth = emac
ip_addr     = <NULL>
baudrate    = 115200 bps
TLB addr    = 0xBFFF0000
relocaddr   = 0xBFF88000
reloc off   = 0x75F88000
irq_sp      = 0xBFE67F48
sp start    = 0xBFE67F38

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment