Denver Dias DenverDias

## keybase.md

      
              1 file
            
          
              0 forks
            
          
                0 comments
              
            
              0 stars
            
          
                DenverDias
                / keybase.md
            
            
              Created
              October 13, 2019 01:42
            
          
    Keybase proof

I hereby claim:

I am DenverDias on github.
I am denver (https://keybase.io/denver) on keybase.
I have a public key whose fingerprint is 4649 9061 59BA 835B A581  4920 3707 71A9 9046 6FE9

To claim this, I am signing this object:

  
## AddRepositoryToPacmanForYaourt
[archlinuxfr]
 SigLevel = Never
 Server = http://repo.archlinux.fr/$arch

## Morse loop()
void loop()
{
	while(!Serial.available());
//This command makes it wait until the Serial data is sent
	while(Serial.available())
	{
		Input[Index]=Serial.read();
//Stores the byte of data from the serial buffer
		Serial.print(Input[Index]);
//Prints out the same data

## Global scope variables
int Index=0, endofstring, i;
//This creates dummy variables to index letters

char Input[255];
//This is required to store the input data temporarily

## Defining setup()
void setup()
{
	Serial.begin(9600);
/* Using the serial command I program the Arduino to communicate at a baud rate of 9600 bits per second. */
	pinMode(tonePin, OUTPUT);
// This command sets the pin to act as output
}

## Defining playLetter function
void playLetter(char x)
{
	switch (x):
		case 'E':
			dit(); return;
		case 'T':
			dah(); return;
		case 'A':
			di();dah(); return;
		case 'O':

## Defining a di
void di()
{
	dit();
}

## Defining a dah
void dah()
{
  tone(tonePin, buzz);
  delay(dahPeriod);
  noTone(tonePin);
  delay(relaxtime);
}

## Defining a dit
void dit()
{
  tone(tonePin, buzz);
  delay(dotPeriod);
  noTone(tonePin);
  delay(relaxtime);
}

## Floating buzz output frequency
#define buzz (analogRead(1)+200)
	[archlinuxfr]
	SigLevel = Never
	Server = http://repo.archlinux.fr/$arch
	void loop()
	{
	while(!Serial.available());
	//This command makes it wait until the Serial data is sent
	while(Serial.available())
	{
	Input[Index]=Serial.read();
	//Stores the byte of data from the serial buffer
	Serial.print(Input[Index]);
	//Prints out the same data
	int Index=0, endofstring, i;
	//This creates dummy variables to index letters

	char Input[255];
	//This is required to store the input data temporarily
	void setup()
	{
	Serial.begin(9600);
	/* Using the serial command I program the Arduino to communicate at a baud rate of 9600 bits per second. */
	pinMode(tonePin, OUTPUT);
	// This command sets the pin to act as output
	}
	void playLetter(char x)
	{
	switch (x):
	case 'E':
	dit(); return;
	case 'T':
	dah(); return;
	case 'A':
	di();dah(); return;
	case 'O':
	void dah()
	{
	tone(tonePin, buzz);
	delay(dahPeriod);
	noTone(tonePin);
	delay(relaxtime);
	}
	void dit()
	{
	tone(tonePin, buzz);
	delay(dotPeriod);
	noTone(tonePin);
	delay(relaxtime);
	}