Last active
November 24, 2025 21:08
-
-
Save Azkali/1d65ea4dc1bad755b1af982f13266384 to your computer and use it in GitHub Desktop.
Board was not initialzied properly. Hang prevented
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| WARNING: Be very very careful when following those steps, you **could** cause permanent and unexpected damages to your console if | |
| You don't follow the exact steps of this guide OR perform extra steps not specified in this guide AND followed when not STRICTLY NEEDED | |
| WARNING 2: DO NOT FLASH FIRMWARE.BIN | |
| If you get the message "Board was not initialized properly. Hang prevented." while booting Linux or Android on Mariko: | |
| 1. Get this https://github.com/hwfly-nx/hwfly-toolbox/releases/download/1.1.1/hwfly_toolbox.bin | |
| 2. Put it in `sdcard:/bootloader/payloads` | |
| 3. Get this https://github.com/hwfly-nx/firmware/releases/download/0.7.1/release_071.zip | |
| 4. Extract and copy `sdloader.enc` to the root of your sdcard fat32 partition | |
| 5. Run `hwfly_toolbox` payload from hekate | |
| 6. In `----SD Loader----` section select `Update` | |
| 7. Power off your switch and boot ubuntu | |
| In case the issue re appear, reapply the steps listed here from 4. to 7. If you didn't removed the files you downloaded in step 1. and 3. |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment