| # This ESPHome configuration file is for a GeekMagic Display device (esp01). | |
| # It sets up the device to display pages of text and notifications, | |
| # with customizable intervals and padding. The display is updated | |
| # periodically and can show different pages based on Home Assistant sensors. | |
| # # License & Terms | |
| # **Free and Open Use** - This code may be freely used, modified, and distributed by anyone. | |
| # **Copyleft Requirement** - Any derivative works, modifications, or forks must also be | |
| # distributed freely under the same terms. You cannot restrict access to modified versions. | |
| # **Attribution Note** - This code was primarily written with AI assistance. |
Very unfortunatley, there is not a reasonable way to get Debian's default initramfs-tools to unlock LUKS volumes using tokens, like FIDO2 or TPM2. The best attempt to make this work using initramfs-tools is https://github.com/bertogg/fido2luks.
The most common way to handle unlocking these LUKS volumes is to use dracut to generate an initram filesystems. I'm not saying that dracut is great, but it will allow you to easily use systemd-cryptenroll tokenized luks unlock methods.
Been having problems with my new SN770 drive, and decided to check if I can firmware update it on Linux. WD only provides a Windows tool, Western Digital Dashboard to download and install firmwares, but, it's possible to find the firmware and install it using Linux tooling as well.
❱ sudo pacman -S nvme-cli
This guide will help you connect your Sony WH-1000XM4 headset to Ubuntu 22.04 using Bluetooth. Once connected, you'll be able to listen to music and use the microphone on apps like Microsoft Teams.
bluetoothctl:
Go into your BIOS settings and make Secure Boot is either turned off or set to Audit Mode.
Method 1. Use a Script to add ZFS support after booting the vanilla Arch install media
Builds the necessary zfs modules within the Arch install enviroment.
The TrueNAS installer doesn't have a way to use anything less than the full device. This is usually a waste of resources when installing to a modern NVMe which is usually several hundred of GB. TrueNAS SCALE will use only a few GB for its system files so installing to a 16GB partition would be helpful.
The easiest way to solve this is to modify the installer script before starting the installation process.
| #!/usr/bin/env sh | |
| # Original author: Michalis Georgiou <mechmg93@gmail.comr> | |
| # Modified by Andrew http://www.webupd8.org <andrew@webupd8.org> | |
| # Current version by Kassius Iacchus https://github.com/iacchus/ | |
| # Depends on: `wget` | |
| # | |
| # Install `wget` on Debian/Ubuntu with: | |
| # apt install wget |
root@main:~ # vm create -t debian -s 100G nixos
root@main:~ # vm iso /stuff/downloads/nixos-graphical-18.03.132192.ce0d9d638de-x86_64-linux.iso
root@main:~ # vm -f install nixos nixos-graphical-18.03.132192.ce0d9d638de-x86_64-linux.iso
determine the 'init' executable path from '(cd0)/isolinux/isolinux.cfg'. look for a line which start's with: 'APPEND init=/nix/store/.....'
| ACTION=="add", SUBSYSTEM=="input", ATTRS{name}=="AB Shutter3 ", TAG+="systemd", PROGRAM="/bin/systemd-escape -p --template=lifx-remote@.service $env{DEVNAME}", ENV{SYSTEMD_WANTS}+="%c" |
| /* | |
| * This program is free software: you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License as published by | |
| * the Free Software Foundation, either version 3 of the License, or | |
| * (at your option) any later version. | |
| */ | |
| #include <arpa/inet.h> | |
| #include <linux/if_packet.h> | |
| #include <linux/ip.h> |