NameOfTheDragon

; temperature tower: https://www.thingiverse.com/thing:2729076
; appliy the following function in Klipper FW before running the temp tower:
TUNING_TOWER COMMAND="SET_HEATER_TEMPERATURE HEATER=extruder" PARAMETER=TARGET START=227.5 FACTOR=-.5 BAND=10
; This starts at 225deg and every 10mm reduces by 5deg until the top tower hits 180deg.

carry0987

RPi3 Disable Bluetooth Or WiFi By Default

Step

1. Use sudo mount /dev/mmcblk0p1 /mnt to mount SD Card

2. Use sudo vim /mnt/config.txt to edit config

3. Disable WiFi